DELL 2350d User Manual

From this menu: You can:
protected flash option is installed in the
device.
* Factory default setting
PCL Emul Mode
Mode Menu Mode Main Menu
PCL Emul Font Source
Font Name
Symbol Set
PCL Emulation Settings
Tray Renumber
From the menu list, use the Arrow buttons 
   to scroll to the PCL Emul menu.
1.
Press the  Select button 
.
2.
Press the  Right Arrow  button 
 until the heading you want appears on the display, and then press
the  Select  button 
.
3.
Use the  Arrow buttons 
   to scroll through the...

From this
menu:
You can:
Symbol Set Specify the symbol set for each font name.Default: 10U PC-8
PCL Emulation Settings
Point
Size
NOTE:  Only
for PostScript
emulation and
typographic
fonts.
Change the point size for scalable typographic fonts.1.00 – 1008.00 in increments of 0.25
12.00*
Pitch Assign the font pitch for scalable monospaced fonts.Range: 0.08 – 100.00 in increments of 0.01
10.00*
Orientation Specify the orientation of text and graphics on the page.Portrait*
Landscape
Lines per
Page
Assign the...

From this
menu:
You can:
Assign
Tray 
Assign
Manual
Paper
Assign
Man Env
0–199
View
Factory
Def
Display the factory default setting assigned to each tray, drawer, or
feeder.
Restore
Defaults
Return all tray, drawer, and feeder assignments to the factory default
settings.
*Factory
default
setting
 Assign
Tray 
Assign
Manual
Paper
Assign
Man Env
0–199
View
Factory
Def
Display the factory default setting assigned to each tray, drawer, or
feeder.
Restore
Defaults
Return all tray, drawer, and feeder...

Installing Optional Hardware
  Installing the 550-Sheet Optional Drawer
  Installing an Optional Memory Card
Installing the 550-Sheet Optional Drawer
An optional drawer attaches under the printer. A drawer consists of two parts: a tray and a support unit.
Your printer supports one optional drawer that holds up to 550 sheets of paper.
CAUTION: If you are installing a drawer after setting up the printer, turn off the printer, and
unplug the power cable before continuing.
Turn the printer off.
1.
Unpack the...

Turn the printer back on.
5.
In Windows Vista  ®
 or later:
Click 
 Control Panel .
a.
Click  Hardware and Sound .
b.
Click  Printers .
c.
In Windows ®
 XP and 2000 :
Click  Start
 Control Panel .
a.
Double-click  Printers and Other Hardware .
b.
Double-click  Printers and Faxes .
c.
6.
Right-click your  Dell Laser Printer model  icon.
7.
Click  Properties .
8.
Click  Install Options .
9.
Click  Ask Printer .
10.
Click  OK.
11.
Click  OK, and then close the Printers folder.
12. 

Installing an Optional Memory Card
The system board has one connector for an optional memory card. The printer can support up to 160 MB for
a non-network printer and 288 MB for a network printer. The printer memory can only be upgraded using
128 MB memory cards for both network and non-network printers. The network printer can also be upgraded
using 256 MB memory cards.
CAUTION: If you are installing a memory card after setting up the printer, turn off the
printer, and unplug the power cable before...

5.
Push the memory card firmly into the connector until the latches on both ends of the connector  snap
into place.
It may require some force to fully seat the card.
6.
Ensure that each latch fits over the notch on each end of the card.
7.
Close the side cover.
8.
Turn the printer back on.
9.
In Windows Vista  ®
 or later:
Click 
 Control Panel .
a.
Click  Hardware and Sound .
b.
Click  Printers .
c.
In Windows ®
 XP and 2000 :
Click  Start
 Control Panel .
a.
Double-click  Printers and Other Hardware ....

11.
Click  Properties .
12.
Click  Install Options .
NOTE: Memory cards designed for other printers may not work with your printer.
13.Click  Ask Printer .
14.
Click  OK.
15.
Click  OK, and then close the Printers folder.
16. 

Loading Paper
  Setting the Paper Size and Paper Type
  Loading the 250-Sheet Paper Tray
  Loading the 550-Sheet Paper Tray
  Using the Rear Exit
  Using the Multipurpose Feeder
  Linking and Unlinking Trays
Setting the Paper Size and Paper Type
NOTE: You must install the software for your printer before configuring the paper trays. For more
information, see  Setting up for Local Printing
 or  Setting up for Network Printing
.
Dell™ 2330d/2350d Laser Printer - Attached Locally to a
Computer
After you set...

Press the Arrow buttons 
   until the correct source appears, and then press the  Select button 
.
Size  appears under the source name.
5.
Press the  Select button 
.
6.
Press the  Arrow buttons 
   until the correct size appears, and then press the  Select button 
.
Submitting Changes  appears, followed by  Size.
7.
Press the  Arrow buttons 
   until  Type appears, and then press the  Select button 
.
8.
Press the  Arrow buttons 
   until the correct type appears, and then press the  Select button 
....