Dream Vision Cinema Ten Pro User Manual

42
6.20 Formato de las señales RGB , y componentes YUV
Selecciona el tipo de señal que llega a las entradas 5 BNC o
Sub D 15
Video Ycb  Cr
Video RGB
Datos Ypb  Pr
Datos RGB
Sincronismos separados H/V
Sincronismos  con el verde
Sincronismos compuestos SC
El proyector funciona con:
1.  Señales YUV entrelazados (Video Ycb Cr)
2. Señales YUV progresivos (Datos Ypb Pr ) 
3. Señales RGB  entrelacados (Video RGB )
4. Señales RGB progresivos (Datos RGB )
En RGB El proyector  funciona con tres tipos de...

43
6.21 Video Format
Use this function to select the format of your video source.
Select Auto-format when connected to a VCR or DVD.
6.22 Auto  Start
Auto-start allows you to choose whether the projector starts
up directly with a picture (auto-start = “on”), or in standby
mode (auto-start = “off”) when connected to mains power.
6.23 Automatic source detection
If automatic source detection = “on”, the projector automati-
cally starts searching for a valid signal from all inputs.
If automatic source...

44
6.21 Formato Video
Utilice esta función para seleccionar el formato de su fuente
de imagen.
Seleccione Auto-format ( Auto formato ) cuando conecte la
unidad a un VCR ó DVD.
6.22 Auto  Start
Auto Start ( Autoencendido) le permite elegir que el proyector se
encienda a) directamente con imagen (auto-start: “on”), o b) per-
manezca en modo de espera-stand-by (auto-start: “off”) cuando
la unidad se conecte a la red eléctrica.
6.23 Detección automática de fuente 
Si se activa la detection automatica de...

45
6.25 Product information
Click the icon product information to bring up information
about the product. 
By selecting “next page”, information about configuration
will appear. By selecting “default settings” all functions will be set to
default. This has to be confirmed by clicking on “confirm”.
Click on “Reset lamp time” and “Confirm” to reset the lamp time.6.25 Informations produit
Cliquez sur l’icône Information Produit pour obtenir les
informations sur votre projecteur.
En sélectionnant  page...

7. MAINTENANCE
THIS PRODUCT
CONTAINS NO USER
SERVICEABLE PARTS. 
AT TEMPTS TO MODIFY
MECHANICS OR ELECTRO-
NICS INSIDE THE HOUSING
WILL VIOLATE ANY WAR-
RANTIES AND MAY BE
HAZARDOUS.
Please contact your local dealer
with any service or maintenance
questions you may have.
7.1. How to obtain Service
If for any reason the product fails
to work properly please contact
your dealer for technical support.
Prepare a list of the symptoms
you observed to make fault dia-
gnostic easier for the dealer.
Please...

8. TROUBLESHOUTING
8.1 There is no image on the wall
CauseThe projector is in 
Standby Mode (red
LED on the panel).
RemedyPress the Stanbby
button.
CauseThe lamp does not 
function. Check the 
LED indicator on the 
control panel, if LED is 
orange, le lamp is not 
functioning.
RemedyThe lamp must be 
changed, contact your 
retailer.
CauseThe projector is in 
“Black Curtain” mode.
RemedyLeave “Black Curtain”
Mode in the Menu 
(chapt 6.9).
CauseThe brightness is too 
low.
RemedyAdjust the brightness 
until...

8.2 The logo appears
CauseThe input source has not 
been switched on.
RemedySwitch on the input 
source.
CauseThe input cables are not 
properly connected.
RemedyCheck that all cable 
connections are properly 
made up.
CauseFor laptop: the external 
RGB port has not been 
activated.
RemedyActivate the external 
port. Consult the laptop’s
operating manual for 
instructions.
CauseThe power saver and/or 
screen saver on the 
computer is turned on.
RemedyTurn off the power saver 
and/or the screen saver.
8.3...

8.4 Poor response from the
remote control
CauseIR receiver of the 
projector is being 
blocked.
RemedyRemove whatever is 
blocking the receiver.
CauseThe remote is not 
pointed at the 
screen/projector.
RemedyMake sure that the 
remote is pointed 
towards the screen, see 
also chapter 5.2.
CauseDistance between the 
remote and the projector 
exceed 10 m (33 ft).
RemedyReduce the distance to 
10 m (33ft) or less, see 
also chapter 5.2.
CauseBattery Power low.
RemedyChange batteries in the 
remote control,...

Tél : +33 1 42 29 44 44
Fax : +33 1 42 29 09 10
www.dreamvision.net