Dukane Projector 8120WIA User Manual

							111
Presentation tools
Interactive Function (continued)
Using “StarBoard Software”
If you are using the “StarBoard Software” for the first time, install it by following 
the instructions in the manual located inside the bundled DVD-ROM.
For details on how to use the “StarBoard Software” and its functions, refer to the  
bundled “StarBoard Software” DVD-ROM manual. The installation method is in  
the menu of DVD which runs automatically when inserted to your computer’s drive 
as follows: Browse Documents→Software, may lead you to a folder named in  
different languages. Select your desired language and refer to the manual inside.
Before using this product, please read all manuals for this product.
We will not be liable for any matters related to the applications and manuals.
►Only use the DVD-ROM in a computer DVD drive. The 
DVDROM is designed for computer use only. NEVER INSERT THE DVD-ROM 
INTO A NON-COMPUTER DVD PLAYER! Inserting the DVD-ROM into an 
incompatible DVD drive may produce a loud noise, which in turn MA Y RESULT 
IN EAR AND SPEAKER DAMAGE!
• 
 After using DVD-ROM, please put it into DVD case and keep it. Please keep 
the DVD neither in direct sunlight nor in a high temperature and high humidity 
environment. CAUTION
• The information in the DVD-ROM is subject to change without notice.
• No responsibility is taken for any obstacle and defect to hardware and 
software of your computer as a result of the use of the DVD-ROM.
• The pen is referred to as “Electronic pen” in the “StarBoard Software”.
• Notations in the “StarBoard Software” manual may differ from those in this 
manual.
• Please regards the word "StarBoard" found in StarBoard Software manual, 
online help, software message or any other related materials as the interactive 
whiteboard system using the Dukane Interactive Projector, or the projector.
("StarboardSoftware" is not changed).
• The set of functions that are available for the combination of Dukane 
Interactive Projector and Starboard Software is in conformity with the Starboard 
FX Portable Series. NOTE 
						

							11 2
Presentation tools
Interactive Function (continued)
Computer : Install the dedicated application "StarBoard Software".
The following is the minimum hardware and operating system requirements to
install "StarBoard Software".
ü CPU: 
 Pentium 4 (1.8 GHz or higher) (Intel Core2 Duo 2.0 GHz or higher 
recommended.)
ü HDD: 600 MB free space
ü Memory: 1 GB or more
ü

 Display: 32 Bit
ü OS
 : One of the following. 
Windows® 7 (32/64 bit)  
Windows® 8.1 (32/64 bit) 
- The operation of StarBoard Software has been verified with the latest 
service pack at the time of release.
 
- StarBoard Software does not support Windows®  Tablet PC Edition and 
Server Edition.
ü Ap
 plication : 
Internet Explorer® 8 / 9 / 10 / 11 
Microsoft Word® 2007 / 2010 / 2013 
Microsoft Excel® 2007 / 2010 / 2013 
Microsoft PowerPoint® 2007 / 2010 / 2013 
Adobe® Reader X/XI 
Adobe® Flash® Player 10
ü DVD-ROM drive
ü Video cards supporting hardware overlay. (when using the video function)
(When using the Webcam function) • DV (digital video devices, DV camera, D-VHS etc.)
• Capture Devices that supports DirectShow with WDM driver
(When hosting a remote conference) CPU: Intel Core2 Duo 2.0 GHz or higher
HDD: 2 GB or more
Memory: 2 GB or more
Others: TPC/IP Network of 54Mbps or greater
System requirements : StarBoard Software
The following specification is required to use Interac tive Function .  
(Windows® computer) 
						

							11 3
Presentation tools
Interactive Function (continued)
(When i-learn: maths toolbox is used)• Display : 1024 x 768 or more
• Application: Adobe
® Reader
• Others: 32bit color 3D video card
The installation requirements are subject to change without notice due to software
upgrades or the like. Please refer to the StarBoard Software manual in the
bundled DVD-ROM for the latest installation requirements.
The following specification is required to use Interactive Fu nction .  
(Mac computer)
Computer : Install the dedicated application "StarBoard Software".
The following is the minimum hardware and operating system requirements to 
install "StarBoard Software".
ü CPU: Intel CPU
ü HDD: 600 MB free space
ü Memory: 1 GB or more
ü Display: High Color (16 bit) or more
ü OS: Mac OSX 10.8 / 10.9 / 10.10
ü Ap
 plication : 
Microsft PowerPoint® 2004/2008/2011 for Mac 
Apple QuickTime® 7.1 or later 
Adobe® Flash® Player 10
ü DVD-ROM drive
(When hosting a remote conference) CPU: Intel Core2 Duo 2.0 GHz or higher
HDD: 2 GB or more
Memory: 2 GB or more
Others: TPC/IP Network of 54Mbps or greater
(When i-learn: maths toolbox is used) • Display: 1024 x 768 or more
• Application : Adobe
® Reader
• Others: 32bit color 3D video card
The following specification is recommended to ensure your comfortable use of
Interactive Function. CPU: Intel Core2 Duo 2.0 GHz or higher
Memory: 2 GB or more
The installation requirements are subject to change without notice due to software 
upgrades or the like. Please refer to the StarBoard Software manual in the 
bundled DVD-ROM for the latest installation requirements. 
						

							11 4
Presentation tools
Interactive Function (continued)
• Do not place the projector near equipment that may emit 
electromagnetic waves or radio waves, such as a radio transmitter , TV, copier, 
or air-conditioner.
• Avoid excessively dusty places, or places that are subject to extremely high or 
low temperature or humidity.
• The pen makes use of infrared light to detect positions. Avoid using it at a 
place where the screen surface is directly exposed to sunlight.  Also, note that 
the pen may not function properly if it is used near an equipment that emits 
infrared wavelengths (plasma display, motion sensor, or automatic lighting 
sensor, etc.).
• The pen movement may be disrupted if the projector is used near an inverter 
fluorescent light, or when the light of an inverter fluorescent light falls directly on 
the screen.
• The PEN sensor (Camera) may not work correctly if strong light (such as 
direct sunlight) or light from an extremely close range (such as from an inverter 
fluorescent lamp) falls on the PEN sensor (Camera) of the projector . Adjust the 
position of projector avoiding those lights.
• Install and use at a position where the screen size is between 60"-100" when 
digital zoom is at the maximum (100%) and the KEYSTONE and PERFECT FIT 
functions are not used. If the KEYSTONE or PERFECT FIT function is used, 
the position of the pen may not be reflected correctly on the screen, or pen 
operation may not yield any response even on the 60''-100'' sized screen.
• StarBoard Software may not activate, if DirectX
® function of the computer is 
turned off. In that case, turn on DirectX® function. Please inquire your computer 
or OS support hotline on how to confirm the settings of DirectX® function On/
Off. NOTE 
						

							11 5
Presentation tools
Interactive Function (continued)
ü CPU: 
 Intel Dual Core (1.5GHz or higher)
ü Memory: 1 GB or more
ü HDD: 100 MB free space
ü

 Graphic Card: 256 MB or more
ü OS
 : One of the following. 
Windows® 7 (32/64 bit) 
Windows® 8/8.1 (32/64 bit)
ü Ot
 hers 
Microphone, Speaker
System requirements : i-Pro
The following specification is required. (Windows® computer)
ü CPU:  Intel CPU
ü Memory: 1GB or more
ü HDD: 100 MB free space
ü
 Graphic Card: 256MB or more
ü OS
 : Mac OSX 10.6 / 10.7 / 10.8 / 10.9
The following specification is required. (Mac computer) 
						

							11 6
Presentation tools
The PC-LESS Presentation reads image and audio data from the storage media 
inserted into the USB TYPE A port and displays the image in the following modes.
The PC-LESS Presentation can be started by selecting the USB TYPE A port as 
the input source.
This feature allows you to make your presentations without using your computer .
PC-LESS Presentation
- Thumbnail mode (11 7)
- Full Screen mode (
121)
- Slideshow mode (
123)
[Supported storage media] • USB memory (USB memory type, USB hard disk and USB card reader type)
• INTERNAL MEMORY (
120)
• USB readers (adapters) that have more than one USB slot may not 
work (if the adapter is acknowledged as multiple devices connected).
• USB devices with security software may not work.
• Be careful when inserting or removing a USB device. (
16, 119)
NOTE
• NTFS is not supported.
NOTE
[Supported format]
• FAT12, FAT16 and FAT32 
						

							11 7
Presentation tools
• Files with a resolution larger than the following are not supported. 
1280 x 800 (Still)， 768 x 576 (Movie)
(* Some computers may not support 1280 x 800.)
• Files with a resolution smaller than 36 x 36 are not supported.
• Files with a resolution smaller than 100 x 100 may not be displayed.
• Movie images with a frame rate higher than 15 fps cannot be displayed.
• Movie images with a bit rate higher than 20 Mbps cannot be displayed.
• Some supported files may not be displayed.
• Only a frame appears when the content of image data cannot be displayed in 
the Thumbnail mode.
• Even with the file format and audio format combinations described above, 
playback of some files may fail. NOTE
[Supported file format and its extension]
• JPEG (.jpeg, .jpg)
 * Progressive is not supported.
• Bitmap (.bmp)
 *  16bit mode and compressed bitmap is not supported.
• PNG (.png)
 * Interlace PNG is not supported.
• GIF (.gif)
 
• Movie (.avi, .mov) *  Supported video format: Motion-JPEG 
Supported audio format: 
 WAV (Linear PCM, Stereo 16bit), 
IMA-ADPCM
Thumbnail mode
PC-LESS Presentation (continued)
The Thumbnail mode displays the images stored in a USB storage device on the 
Thumbnail screen. Maximum 20 images are displayed in a screen.
If you wish, you can jump into the Full Screen mode or Slideshow mode, after you 
select some images in the Thumbnail mode.
The Thumbnail mode will be started as the primary function of the PC-LESS 
Presentation after selecting the  USB TYPE A port as the input source.
Thumbnail menu
Selected image
Thumbnail images 
						

							11 8
Presentation tools
PC-LESS Presentation (continued)
The setup menu for the selected image
Use the ◄/► cursor buttons to switch each setting or use the ► cursor button to execute 
the functions as follows.
ItemFunctions
RETURN Press the ► cursor button or ENTER to return to the Thumbnail screen.
START Switch to ON to set the selected image as the first image in the Slideshow
. 
This setting information will be saved in the “playlist.txt” file (
125).
STOP Switch to ON to set the selected image as the last image in the Slideshow
. 
This setting information will be saved in the “playlist.txt” file (
125).
SKIP Switch to ON to skip the selected image in the Slideshow. This setting 
information will be saved in the “playlist.txt” file (
125).
ROTATE Press the ► cursor or ENTER button to rotate the selected still image 90 
degrees clockwise. This setting information will be saved in the “playlist.txt” 
file (
125).
DELETE Press the ► cursor or ENTER button to delete selected image.
After executing delete, renew the image number displayed Thumbnail menu. 
If first or end image in the  Slideshow is deleted, renew the setting of start/
stop.
You can control the images on the Thumbnail screen with the remote control, 
control panel, Web Remote Control or pen. The following functions can be 
supported while the Thumbnail is displayed. Operating by buttons or keys
Button operation
Functions
The remote 
control Control panel
Web Remote 
Control
▲/▼/◄/► ▲/▼/◄/► [▲]/[▼]/[◄]/[►] Move cursor
PAGE UP
PAGE DOWN -[PAGE UP]
[PAGE DOWN] Switches pages
ENTER INPUT [ENTER]• Displays the selected image on 
the Full Screen mode when a cursor 
is on a thumbnail image. 
• Displays the setup menu (
below
) 
for the selected image when a 
cursor is on a thumbnail image 
number. 
						

							11 9
Presentation tools
You can also control the images by using the menu on the Thumbnail screen. PC-LESS Presentation (continued)
Operating by the menu on the Thumbnail screen
ItemFunctions
Moves to an upper folder.
SORT Allows you to sort files and folders as following.
RETURN Press the ► cursor button or ENTER to return to the Thumbnail 
screen.
NAME UP Sorts in ascending order by file name.
NAME DOWN Sorts in descending order by file name.
DATE UP Sorts in ascending order by file date.
DATE DOWN Sorts in descending order.by file date.
▲/▼ Go to previous / next page.
SLIDESHOW Configures and starts the Slideshow (
123).
RETURN Press the ► cursor button or ENTER to return to the Thumbnail 
screen.
PLAY Press the ► cursor button or ENTER to start the Slideshow.
START Sets the beginning number of the Slideshow.
STOP Sets the end number of the Slideshow.
INTERVAL Sets the interval time for displaying still images during the 
Slideshow.
PLAY MODE Selects the Slideshow mode.
INPUT Switches the input port.
MENU  Displays the menu.
REMOVE USB Be sure to use this function before removing USB storage device 
from the projector. After that, the projector will not recognize a USB 
storage device until you insert it again into the 
USB TYPE A input 
port. 
 / Turns the sound on/off for files that contain audio data. 
						

							120
Presentation tools
PC-LESS Presentation (continued)
• These operations are not accessible while the projector OSD is displayed.
• The Thumbnail mode is able to display up to 20 files in one page.
• It is not possible to change the input port by using the 
 button when the 
Thumbnail screen, Slideshow, or Full Screen is displayed.
• The image quality may deteriorate when playing back audio data included in 
a movie. If you want to give priority to the image quality, turn off the sound by 
setting ♪ to off.
• If one of the  AUDIO IN ports is selected or 
 is selected for USB TYPE A in 
AUDIO SOURCE of the AUDIO menu (
61), ♪ cannot be operated.
• Some error icons will be displayed in the Thumbnail. NOTE
This file seems to be broken or not supported format.A file that cannot be displayed on the thumbnail 
screen is indicated by a file format icon.
INTERNAL MEMORY
Multiple template data have been saved in INTERNAL MEMORY.
These images can be displayed in USB TYPE A.
Presentation can be conducted easily by using template data and pen.
INTERNAL MEMORY in the projector can be referred to on the PC when 
MEMORY ACCESS item of IWB menu is set to COMPUTER.
Image data can be saved in INTERNAL MEMORY in the projector from the PC. 
A folder to save image data can be seen as removable disk named "PJ_
INTERNAL".
Image data can be played in USB TYPE A when MEMORY ACCESS item of 
IWB menu is set to PROJECTOR after saving image data and disconnecting 
removable disk.
• INTERNAL MEMORY in the projector may be infected with a virus by 
connecting to a computer.
NOTE