Dukane Projector 8120WIA User Manual

							31
CALIBRATION
KEYSTONE/
ASPECTACCENTUALIZERHDCR
AV MUTE
POSITIONESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP1
2
ENTER
FOCUS- +D-ZOOM-
+
＋
ー
VOLUMEMAGNIFYMYBUTTON
INPUT
PERFECT FITTEMPLATE
Operating
1.Press the AUTO button on the remote control.  
Pressing this button performs the following.
Using the automatic adjustment feature
  For a computer signal 
The vertical position, the horizontal position and the horizontal 
phase will be automatically adjusted.  
Make sure that the application window is set to its maximum size 
prior to attempting to use this feature. A dark picture may still be 
incorrectly adjusted. Use a bright picture when adjusting.
 
 For a video signal 
The video format best suited for the respective input signal will be selected 
automatically. This function is available only when the AUTO is selected for 
the VIDEO FORMAT item in the INPUT

 menu (
48). The vertical position and 
horizontal position will be automatically set to the default.
●  The automatic adjustment operation requires approx. 10 seconds.  Also please 
note that it may not function correctly with some input. 
● 
 When this function is performed for a video signal, a certain extra such as a line 
may appear outside a picture.
● 
 When this function is performed for a computer signal, a black frame may be 
displayed on the edge of the screen, depending on the PC model. 
● 
 The items adjusted by this function may vary when the FINE or DISABLE is selected 
for the AUTO ADJUST item of the SERVICE item in the OPTION menu (
71).
   For a component video signal  
The vertical position and horizontal position will be automatically set to the default. 
The horizontal phase will be automatically adjusted.
AUTO button
CALIBRATION
KEYSTONE/
ASPECTACCENTUALIZERHDCR
AV MUTE
POSITION ESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP1
2
ENTER
FOCUS- +D-ZOOM-
+
＋
ー
VOLUMEMAGNIFYMYBUTTON
INPUT
PERFECT FITTEMPLATE
Press the FOCUS + or FOCUS - button on the remote 
control, or FOCUS + or FOCUS - button on the projector 
(
5) 
while no menu is on screen, to display the FOCUS box on 
screen. Use the FOCUS + and FOCUS - buttons to adjust 
the screen focus. After the focus adjustment, wait for a while 
until the FOCUS box is disappeared, if you want to display 
any other menu on screen by pushing the  MENU button on 
the projector.
● The ◄/►/▲/▼ buttons on the projector work only as the 
cursor buttons while the template is displayed 
(63).
● The FOCUS +/- button on the projector is invalid when the 
USB TYPE A port is selected as the input source.
FOCUS + button FOCUS - button 
						

							32
Operating
1.Press the TEMPLATE button on the remote control.   
Each time you press the button, the projector switches the 
mode for TEMPLATE in turn. 
Using the TEMPLATE feature
● The TEMPLATE button does not work when no proper signal is inputted.TEST PATTERN  DOT-LINE1  DOT-LINE2  DOT-LINE3
HAS-WM05                                                             DOT
-LINE4
HAS-WM03  
  MAP2  MAP1  CIRCLE2  CIRCLE1 TEMPLATE  button
CALIBRATION
KEYSTONE/
ASPECTACCENTUALIZERHDCR
AV MUTE
POSITIONESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP1
2
ENTER
FOCUS- +D-ZOOM-
+
＋
ー
VOLUMEMAGNIFYMYBUTTON
INPUT
PERFECT FITTEMPLATE
HDCR
: Displays the HDCR menu (42).
ACCENTUALIZER: Displays the ACCENTUALIZER menu (
42).
Other buttons
HDCR  button
CALIBRATION
KEYSTONE/
ASPECTACCENTUALIZERHDCR
AV MUTE
POSITIONESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP1
2
ENTER
FOCUS- +D-ZOOM-
+
＋
ー
VOLUMEMAGNIFYMYBUTTON
INPUT
PERFECT FITTEMPLATE
ACCENTUALIZER button 
						

							33
CALIBRATION
KEYSTONE/
ASPECTACCENTUALIZERHDCR
AV MUTE
POSITIONESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP 1
2
ENTER
FOCUS-+D-ZOOM-
+
＋
ー
VOLUMEMAGNIFYMYBUTTON
INPUT
PERFECT FITTEMPLATE
1.Press the POSITION
 button on the remote control while no menu 
is on screen, to display the D-SHIFT 
(54) dialog on screen.
Adjusting the position
2.Use the ▲, ▼, ◄ and ► buttons to adjust the picture position.
Press the POSITION  button again to finish this operation.
● 
 This is a function to shift the position of the shrunken picture by the D-ZOOM ( 54) 
function.
● 
 When an OSD (On Screen Display) menu is displayed, this operation moves the 
position of the OSD menu, but not the position of the picture  
(37).
● 
 The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 320 (full 
screen).
Operating
1.Press the KEYSTONE/PERFECT FIT  
button on the remote control. A dialog 
will appear on the screen to aid you in 
correcting the distortion.
Correcting the keystone/perfect fit  distortions
2.Use the ▲/▼ cursor buttons to select MANUAL or PERFECT 
FIT operation, and press the ► button to perform the following.
(1)  MANUAL displays a dialog for keystone correction.  
Use the ▲/▼ buttons to select 
 KEYSTONE /  
 KEYSTONE, then use the ◄/► buttons for 
adjustment.
(2) 
 PERFECT FIT displays a dialog for adjusting the shape 
of the projected image in each of the corners and sides.
To close the dialog and complete this operation, press the 
KEYSTONE/PERFECT FIT button again. Even if you do not do 
anything, the dialog will automatically disappear after about ten 
seconds.
●  The adjustable range of this function will vary among inputs. For some input, 
this function may not work well.
POSITION  button
KEYSTONE/
PERFECT FIT    
button
CALIBRATION
KEYSTONE/
ASPECTACCENTUALIZERHDCR
AV MUTE
POSITION ESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP1
2
ENTER
FOCUS- +D-ZOOM-
+
＋
ー
VOLUMEMAGNIFYMYBUTTON
INPUT
PERFECT FITTEMPLATE 
						

							34
CALIBRATION
KEYSTONE/
ASPECTACCENTUALIZERHDCR
AV MUTE
POSITIONESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP1
2
ENTER
FOCUS- +D-ZOOM-
+
＋
ー
VOLUMEMAGNIFYMYBUTTON
INPUT
PERFECT FITTEMPLATE
Operating
1.
Using the magnify feature
2.
3.
4.
Press the MAGNIFY ON button on the remote control.  
The picture will be magnified, and the MAGNIFY dialog will 
appear on the screen. When the 
MAGNIFY ON button is 
pressed for the first time after the projector is turned on, the 
picture will be zoomed by 1.5 times. On the dialog, triangle 
marks to show each direction will be displayed.
The display magnification of the projector switches in order  
with every press of the MAGNIFY ON button.
 
 For computer signals, HDMITM (RGB) signals,  MHL signals, input 
signals from the LAN, USB TYPE A or USB TYPE B port
      1.5 times   2 times  3 times  4 times  1 time 
 
 For video signals, component video signals, HDMITM (Component) 
signals or MHL signals
      1.5 times   2 times   1 time 
While the triangles are displayed on the dialog, use the ▲/▼/◄/► cursor 
buttons to shift the magnifying area.
Press the MAGNIFY OFF  button on the remote control to exit magnification.
●  The MAGNIFY dialog will automatically disappear in several seconds with no 
operation. The dialog will appear again if the  MAGNIFY ON button is pressed 
when the dialog has automatically disappeared.
● 
 The magnification is automatically disabled when the displaying signal or its 
display condition is changed.
● 
 While the magnification is active, the keystone distortion condition may vary . 
It will be restored when the magnification is disabled.
● 
 Some horizontal stripes might be visible on the image while magnification is 
active.
● 
 This function is not available in the following cases:  -
  A sync signal in the range not supported is input.
-
  There is no input signal.
MAGNIFY
ON/OFF  button 
						

							35
Operating
1.Press the FREEZE button on the remote control.  
The “FREEZE” indication will appear on the screen (however, 
the indication will not appear when the OFF is selected for 
the MESSAGE item in the SCREEN menu (
65)), and the 
projector will go into the FREEZE mode, which the picture is 
frozen.
To exit the FREEZE mode and restore the screen to normal, 
press the FREEZE button again. 
Temporarily freezing the screen
●  The projector automatically exits from the FREEZE mode when some control 
buttons are pressed.
● 
 If the projector continues projecting a still image for a long time, the LCD 
panel might possibly be burned in. Do not leave the projector in the FREEZE 
mode for too long.
● 
 Images might appear degraded when this function is operated, but it is not a 
malfunction.
FREEZE button
CALIBRATION
KEYSTONE/
ASPECTACCENTUALIZERHDCR
AV MUTE
POSITION ESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP1
2
ENTER
FOCUS- +D-ZOOM-
+
＋
ー
VOLUMEMAGNIFYMYBUTTON
INPUT
PERFECT FITTEMPLATE 
						

							36
CALIBRATION
KEYSTONE/
ASPECTACCENTUALIZERHDCR
AV MUTE
POSITIONESC
MENU
RESET
IWBAUTOPAGEDOWNONOFFFREEZE
UP1
2
ENTER
FOCUS- +D-ZOOM-
+＋ーVOLUMEMAGNIFYMYBUTTON
INPUT
PERFECT FITTEMPLATE
CALIBRATION
KEYSTONE/
ASPECTACCENTUALIZERHDCR
AV MUTE
POSITIONESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP 1
2
ENTER
FOCUS-+D-ZOOM-
+
＋
ー
VOLUMEMAGNIFYMYBUTTON
INPUT
PERFECT FITTEMPLATE
Operating
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.(1)  Use the ▲/▼ cursor buttons to select an item to 
operate. If you want to change it to the ADVANCED 
MENU, select the ADVANCED MENU.
(2) 
 Use the ◄/► cursor buttons to operate the item.
This projector has the following menus:  
IWB, PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, 
SECURITY and EASY MENU.  
EASY

 MENU consists of functions often used, and the other menus are classified 
into each purpose and brought together as the ADVANCED MENU.
Each of these menus is operated using the same methods. While the projector 
is displaying any menu, the  MENU button on the projector works as the cursor 
buttons. The basic operations of these menus are as follows.
In the EASY MENU
(continued on next page) (1) 
 Use the ▲/▼ cursor buttons to select a menu. 
If you want to change

 it to the EASY MENU, select 
the EASY MENU. 
The items in the menu appear on the right side.
(2) 
 Press the ► cursor button or ENTER button to  
move the cursor to the right side. Then use the  
▲/▼ cursor buttons to select an item to operate and press the ► cursor 
button or ENTER button to progress. The operation menu or dialog of the 
selected item will appear

.
(3) 
 Use the buttons as instructed in the OSD to operate the item.
In the ADVANCED MENU
MENU button 
(Cursor buttons)
RESET button
ENTER button MENU button
Cursor buttons
ESC button 
						

							37
Operating
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select EXIT and press 
the ◄ cursor button or ENTER button. Even if you do not do anything, the 
dialog will automatically disappear after about 30 seconds.
●  If you want to move the menu position, use the cursor buttons after pressing the 
POSITION  button.
● 
 Some functions cannot be performed when a certain input port is selected, or 
when a certain input signal is displayed.
● 
 When you want to reset the operation, press the  RESET button on the remote 
control during the operation. Note that some items (ex. LANGUAGE, VOLUME) 
cannot be reset.
● 
 In the ADVANCED MENU, when you want to return to the previous display, 
press the ◄ cursor button or ESC button on the remote control.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
Indication Meaning
EXITSelecting this word finishes the OSD menu. It's the same as 
pressing the 
MENU button.
RETURN Selecting this word returns the menu to the previous menu.
CANCEL or NO Selecting this word cancels the operation in the present 
menu and returns to the previous menu.
OK or YES Selecting this word executes the prepared function or shifts 
the menu to the next menu. 
						

							38
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table.
ItemDescription
IWB CALIBRATE Pressing the ► button displays the IWB CALIBRATE dialog.
See the Interactive Function (

89).
ASPECT Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (

46).
D-ZOOM Using the ◄/► cursor buttons adjusts the magnification ratio.
Small  ó Large
See the D-ZOOM item in the SETUP menu (
 54).
•  The on-screen menu might be displayed outside of the image 
display area depending on the adjustment value of the ASPECT, 
D-ZOOM, 
 KEYSTONE and  KEYSTONE. Changing the values 
of ASPECT, D-ZOOM,  KEYSTONE and  KEYSTONE may fix 
the symptom.
 KEYSTONE Using the ◄/► buttons corrects the vertical keystone distortion.
See the  
KEYSTONE item in SETUP menu ( 55).
 KEYSTONE Using the ◄/► buttons corrects the horizontal keystone distortion. 
See the  KEYSTONE item in SETUP Menu (
55).
PERFECT FIT Pressing the ► button displays the dialog for adjusting the shape 
of the projected image in each of the corners and sides. See the 
PERFECT FIT item in SETUP menu (

56).
(continued on next page) 
						

							39
EASY MENU
ItemDescription
PICTURE MODE Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR TEMP 
settings. Choose a suitable mode according to the projected source.
 NORMAL   ó  CINEMA  
ó  DYNAMIC  
ó  BOARD(BLACK)
DICOM SIM.
 PHOTO  ó DAYTIME 
ó WHITEBOARD 
ó BOARD(GREEN)
• When the combination of GAMMA and COLOR TEMP differs 
from pre-assigned modes above, the display on the menu for the 
PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and 
COLOR TEMP (
 43, 44) items in PICTURE menu.
• Lines or other noise might appear on the screen when this function 
is operated, but it is not a malfunction.
• DICOM SIM. is the projector's DICOM
® ("Digital Imaging and 
Communication in Medicine") simulation mode. This mode 
simulates the DICOM standard, which is a standard applicable to 
digital communications in medicine, and can be useful for displaying   
medical images, such as X-rays photos. This projector is not a 
medical device and is not compliant to the DICOM standard, and 
neither the projector nor the DICOM SIM. mode should be used for 
medical diagnosis.
ECO MODE Using the ◄/► buttons changes the eco mode setting.
See the ECO MODE item of the LAMP & FILTER item in SETUP 
menu (

58).
• When the ambient temperature is around 35 to 40°C, the 
brightness of lamp is reduced automatically.
INSTALLATION Pressing the ► button displays the INSTALLATION dialog.
See the INSTALLATION item in SETUP menu (

60).
RESET Performing this item resets all of the EASY MENU items except the 
FILTER TIME and LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the ► 
button performs resetting.
FILTER TIME The usage time of the air filter is shown in the menu.
Performing this item resets the filter time which counts usage time 
of the air filter.
A dialog is displayed for confirmation. Selecting the OK using the ► 
button performs resetting. 
See the FILTER TIME item of the LAMP & FILTER item in SETUP 
menu (

59).
(continued on next page) 
						

							40
EASY MENU
ItemDescription
LANGUAGE Using the ◄/► buttons changes the display language. 
See the LANGUAGE item in SCREEN menu (

63).
ADVANCED MENUPress the ► or ENTER button to use the menu of PICTURE, 
IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK or 
SECURITY.
EXIT Press the ◄ or ENTER button to finish the OSD menu.