Eiki Eip-1 Multimedia Projector Owners Instruction Manual

							10
3.4 Adjusting the focus and zoom 
 
 
 
 
 
 
 
You can zoom in or out the image with the zoom ring. To enlarge the image size, 
please turn the zoom ring counter-clockwise. To reduce the image size, please turn 
the zoom ring clockwise. To adjust the focus of the image, please turn the focus 
ring until the image becomes clear. The projection distance of the projector is 
1.45 – 10 meters. Zoom Ring 
Focus Ring  
						

							11
3.5 Projected Image Size 
 
 
 
 
 
 
 
Projection Distance  1.45M 2.0M 4M  6M 10 M 
Tele Screen size  42”  49”  99”  148”  247” 
Wide Screen Size  48”  57”  113”  170”  283” 
 
 
 
 
 
 
 
  
						

							12
4. How to use the projector 
This section covers the methods of using and adjusting the projector, as well as the 
methods of using the control panel, remote controller and menu. 
 
4.1 Initial image adjustment 
1  Please follow the previously stated steps to turn on the projector; and keep the 
projector facing the screen. 
2  Turn the zoom ring to adjust the size of the image. 
3  Turn the focus ring to adjust the focus of the image. 
4  Use the foot adjuster to adjust the altitude of the image. 
5  Use either the control panel or remote controller to adjust the image for 
horizontal position, vertical position or keystone. 
6  Adjust the brightness, contrast and color temp of image with the menu. 
 
4.2 Control panel and remote controller 
There are two ways to use the projector – control panel and remote controller. 
- Control Panel
 
  
 
 
Auto/Enter 
Menu 
Power  LED Indicator ¡ô¡õ¡ö ¡÷  
						

							13 LED Indicator 
y When the projector is turned on, the LED indicator flashes. Press the Power
key to display the mage. At this time, the LED indicator lights up 
consistently. 
y If the LED indicator flashes quickly, the projector is probably in an 
abnormal condition. Possible reasons include: 
a.  If the fan is in an abnormal condition, the message “Fan lock error 
occurred, Projector going shutdown!” appears on the screen. 
b.  If the temperature becomes abnormal, the message “Thermal error 
occurred, Projector going shutdown!” appears on the screen. 
y LED indicator flashes quickly when you start the shutdown process. 
 
Power 
y Please refer to page 8 “Turning on/off the projector”. 
 
Auto/Enter  
y This key works as Auto key in normal condition. 
y This key works as an Enter key in the menu. 
 
Menu  
y Press this key to open the menu. Press again to close the menu. 
y If you do not choose any items after opening the menu, then the menu will 
automatically close after 20 seconds. 
 
↑↓Keys 
y You can use the up and down keys to select menu options. 
y Usually the down key works as a Source key. You can also press this key to 
select Analog RGB, Analog Y Pb Pr, Digital RGB, Composite Video, 
S-Video and Component Video signals in sequence. 
 
← → Keys 
y On the menu, press the Enter key and then the right key to increase the 
setup value; or the left key to reduce the setup value. 
 
 
  
						

							14
- Remote controller 
 
 
Key Functions 
Freeze/Esc/L y Press this key to freeze the image. Press again to clear 
the static image. 
y Press this key to quit the menu if the menu is on the 
screen. 
y In the remote-control mouse mode, this key works as 
the left key of mouse. 
Enter/R y Please check page 13 “Auto/Enter” of “Control panel” 
for the use of this key on the menu. 
y In the remote-control mouse mode, this key works as 
the right key of mouse. 
Power y Please refer to page 8 “Turning on/off the projector”. 
						

							15 Mode y Press this key and green LED indicator turns on. Then 
the remote controller can be used as a mouse. 
 Be sure to connect USB mouse cable to the 
computer and projector before using the remote   
controller as a mouse. 
Menu y Please refer to page 13 “Menu” of “Control panel”. 
Source y Select Analog RGB, Analog Y Pb Pr, Digital RGB, 
Composite Video, S-Video and Component Video 
signals in sequence. 
Blank y Convert the image into blank and fully blue. Press 
again to restore. 
Auto y Press this key to adjust the phase and frequency 
automatically. 
Pg.Up  y On the remote control mode, press this key to zoom in 
the image (*). 
y When mouse is in use, press this key to turn to 
previous page. 
Pg.Dn  y On the remote control mode, press this key to zoom 
out the image (*). 
y When mouse is in use, press this key to turn to next 
page.  
 Press this key and then left/right keys for keystone. 
y Press 
						

							16
5. Menu 
Press the Menu key to open the menu. You can press the up or down key to select 
the items on the menu; or press Esc to quit the menu. To enter the submenu, please 
press Enter key or right key. On the submenu, press the Menu or Esc key on the 
remote controller to return to the main menu; or press twice to quit menu. 
5.1 Image (VGA mode)  
 
Submenu   Purpose   Using 
Brightness  
(**) To adjust the brightness of 
image Press 
						

							17
5.2 Image (Video mode) 
 
 
 
Submenu   Purpose   Using 
Brightness  
To adjust the brightness of 
image. 
 Press 
						

							18
5.3 Display (VGA mode) 
 
Submenu   Purpose   Using 
Frequency  
To adjust the frequency of 
data display to be the same 
as the frequency of display 
card of computer. Please 
use this function to correct 
the flickering vertical lines 
shown in the image. Press 
						

							19  
Proportion 
To select the aspect ratio of 
screen, 16:9 or 4:3. Press