Eizo Coloredge Ce210w Users Manual

Important
Please read this User’s Manual  carefully to 
familiarize yourself with safe and effective 
usage  procedures. 
 
Please retain this manual for future 
reference
.
About TCO'03 ..........................................................48
FCC Declaration of Conformit
y ................................49
Hinweis zur Ergonomie / Recycle Auskunft / 
Hinweise zur Auswahl des richtigen 
Schwenkarms für Ihren Monito
r ..............................50
SAFETY SYMBOLS...

2
SAFETY SYMBOLS

SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them carefully.
WARNING
Failure  to  abide  by  the  information  in  a WARNING  may  result  in  serious  injury  and  can  be 
life threatening.
CAUTION
Failure  to  abide  by  the  information  in  a  CAUTION  may  result  in  moderate  injury  and/or 
propertyor product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2006-2007 EIZO NANAO...

PRECAUTIONS
3

PRECAUTIONS
IMPORTANT!
• This product has been adjusted specifically for use in the region to which it was originally shipped. 
If operated outside the region to which it was originally shipped, the product may not perform as 
stated in the specifications.
• To ensure personal safety and proper maintenance, please read this section and the caution statements 
on the unit (refer to the figure below).
[Location of the Caution Statements]
 WARNING
If  the  unit  begins  to  emit  smoke,  smells...

4
PRECAUTIONS

 WARNING
Place the unit at the strong and stable place.
A  unit  placed  on  an  inadequate  surface  may  fall  and  result  in  injury  or  equipment 
damage.
If  the  unit  falls,  disconnect  the  power  immediately  and  ask  your  dealer  for  advice. 
Do  not  continue  using  a  damaged  unit.  Using  a  damaged  unit  may  result  in  fire  or 
electric shock.
OK
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
• Do not...

PRECAUTIONS
5

 WARNING
When  attaching  an  arm  stand,  please  refer  to  the  user's  manual  of  the  arm 
stand and install the unit securely.
Not  doing  so  may  cause  the  unit  to  come  unattached,  which  may  result  in  injury  or 
equipment  damage.  When  the  unit  is  dropped,  please  ask  your  dealer  for  advice. 
Do  not  continue  using  a  damaged  unit.  Using  a  damaged  unit  may  result  in  fire  or 
electric  shock.  When  reattaching  the  tilt  stand,  please  use...

6
PRECAUTIONS
LCD Panel
In  order  to  suppress  the  luminosity  change  by  long-term  use  and  to  maintain  the  stable  luminosity,  use  of  a 
monitor in lower brightness is recommended.
The  LCD  panel  is  manufactured  using  high-precision  technology.  However,  note  that  the  appearance  of  any 
missing pixels or lit pixels does not indicate damage to the LCD monitor.
Percentage of effective pixels:99.9994%or higher.
The  backlight  of  the  LCD  panel  has  a  fixed  life  span.  When...

1. INTRODUCTION
7
1. INTRODUCTION
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
CE210W
• 21" wide format LCD
• Dual inputs compliant (DVI-I x 2)
• DVI Digital input (TMDS ) compliant
• [Horizontal scanning frequency] 
Analog: 24 - 82 kHz 
Digital: 31 - 65 kHz 
[Vertical scanning frequency]
 
Analog: 49 - 86 Hz (1280x1024: 49-76Hz/1680x1050: 49 -61Hz) 
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz) 
[Resolution] 1680 dots x 1050 lines
•  Frame Synchronous mode supported (59 - 61...

8
1. INTRODUCTION

1-2. Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
• LCD Monitor
• Power Cord
• Analog Signal Cable (FD-C16)
• Digital Signal Cable (FD-C39)
• EIZO USB Cable (MD-C93)
• "EIZO LCD Utility Disk" CD-ROM
• Calibration software "ColorNavigator CE" (in the CD-ROM)
• ColorNavigator CE" Quick Reference
• User's Manual (in the CD-ROM)
• Setup Manual
• LIMITED WARRANTY
• Adjustment Certificate
•...

1. INTRODUCTION
9

1-3. Controls & Connectors
Front
SIGNALAUTOENTER
(1)
(4)
(2)
(6)(7)
(3) (8)(5)
(1) ScreenManager®Monitor Adjustment menu
(2) Monitor Adjustment menu Directly touching the left or right button allows you to select a 
FineContras
t mode.
(3) Input Signal Selection Switch(SIGNAL) Switch the input signals when connecting 2 PCs.
(4) Auto Adjustment Switch (AUTO)  Adjust the screen to appropriate condition automatically (analog 
input only).
(5) Enter Switch (ENTER) Show the ScreenManager...

10
1. INTRODUCTION

Rear / Side / Bottom (CE210W is given as an example.)
(9) Stand (Detachable)The LCD monitor can be used with an optional arm stand by 
removing
the stand (See " 6. ATTACHING AN ARM ").
(10) Security Lock Slot Allows for connection of a security cable. This lock supports 
Kensington's MicroSaver security system. For further 
information, please consult:
Kensington Technology Group
 
2855 Campus Drive, San Mateo, CA 94403 USA
 
Tel.: 800-650-4242, x3348, Intl: 650-572-2700,...