Eizo Coloredge Ce210w Users Manual

5. MAKING USE OF USB (Universal Serial Bus) 
31

3  After setting up, the monitor's USB hub is available for connecting USB compliantperipherals to the downstream ports of the monitor.
Connecting Examples
Scanner
Keyboard
Mouse
PC
Downstream Port:Connect the cables from USB 
complaint peripherals such as a 
mouse, keyboard etc.
Downstream Port:
Scanner
Keyboard
Downloaded from ManualMonitor.com Manual• 

32
6. ATTACHING AN ARM

6. ATTACHING AN ARM
The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to 
the LCD monitor.
NOTE
• If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers 
before selecting.
- Hole spacing on the arm mounting 
CE210W : 100 mm x 100 mm (VESA compliant) 
CE240W : 100 mm x 100 mm (VESA compliant) or 200 mm x 100 mm (VESA compliant)
- Supportable Weight: Total weight of the monitor (without stand)...

6. ATTACHING AN ARM
33

CE240W
• Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant)
200
100
100
100100
4 Mounting Screws (enclosed): M4 x 12 mmArm-Stand:
• Hole spacing on the arm mounting: 200 mm x 100 mm (VESA compliant)
200
100
100
100100
6 Mounting Screws (enclosed): M4 x 12 mmArm:
Downloaded from ManualMonitor.com Manual• 

34
7. TROUBLESHOOTING

7. TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
• No picture problems  See No.1 ~ No.2
• Imaging problems  See No.3 ~ No.14
• Other problems  See No.15 ~ No.18
• USB problems  See No.19 ~ No.20
Problems
Points to check with PossibleSolutions
1. No picture
•Indicator status: Off
• Check that the power cord is correctly connected. If the 
problem persists, turn off the monitor power for a few 
minutes, then turn it back on...

7. TROUBLESHOOTING
35

ProblemsPoints to check with PossibleSolutions
6.The characters and images have several vertical bars 
on their right side.
 
• Adjust the characters and images using the .
7.Horizontal bars of distortion appear.
 • Decrease the horizontal bars using the  (page 24).
8.Letters and lines appear blurred.
• Adjust the blurred lines using  (page 26).
9.Distortion appears like the figure below.
 • This happens when both composite (X-OR) input signal 
and separate vertical synchronizing...

36
7. TROUBLESHOOTING

ProblemsPoints to check with PossibleSolutions
18.The Auto adjustment switch does not operate.• Check that there is nothing left on the face of Auto 
Adjustment switch. Wipe the control panel, and then touch 
the Auto Adjustment switch again with dry finger.
• The adjustment lock is probably on.  To unlock: turn the LCD 
monitor off. Then, while touching the Auto Adjustment switch, 
turn the power on.
19.PC is hung up. / The peripherals connected to the 
downstream ports do not...

8. CLEANING 
37

8. CLEANING
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime.
NOTE
• Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or

other strong solvents, as these may cause damage to the cabinet or LCD panel.
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent. Do not 
spray wax or cleaner directly into the cabinet. (For details, refer to the...

38
9. SPECIFICATIONS

9. SPECIFICATIONS
CE210W
LCD Panel53 cm (21.1 inch), TFT color LCD panel with Anti-Glare Hard Coating, 
Viewing Angle: Horizontal: 178°, Vertical: 178° 
(CR: 10 or more)
Dot Pitch0.270mm
Horizontal Scan 
Frequency
Analog 24~82kHz (Automatic)
Digital31~65kHz
Vertical Scan 
Frequency
Analog 49~86Hz (Automatic) 
(1280 x 1024: 49 ~ 76 Hz / 1680 x 1050: 49 ~ 61 Hz)
Digital 59 ~ 61 Hz (VGA TEXT: 69 ~ 71 Hz)
Resolution1680 dots x 1050 lines
Dot Clock 
(Max.)
Analog150MHz
Digital120MHz...

9. SPECIFICATIONS
39

CE240W
LCD Panel61 cm (24.1 inch), TFT color LCD panel with Anti-Glare, 
Viewing Angle: Horizontal: 178°, Vertical: 178° 
(CR: 10 or more)
Dot Pitch0.270mm
Horizontal Scan 
Frequency
Analog24~94 kHz (Automatic)
Digital31~76 kHz
Vertical Scan 
Frequency
Analog 49~86Hz (Automatic) 
(1600 x 1200: 49 ~ 76 Hz / 1920 x 1200: 49 ~ 61 Hz)
Digital 59 ~ 61 Hz (VGA TEXT: 69 ~ 71 Hz)
Resolution1920 dots x 1200 lines
Dot Clock (Max.)
Analog202.5MHz
Digital162MHz
Display Colors
16.77 million...

40
9. SPECIFICATIONS

Default settings
Brightness30%
Smoothing3
Temperature
6500K
FineContrast Mode
Custom
PowerManager  Analog input : VESA DPMS
 
Digital input: DVI DMPM
Screen Size
Full
Input Priority
1
Off Timer Disable
Menu Settings Menu Size Normal
Menu Off Timer
45 seconds
BeepOn
LanguageEnglish
Beeper settings
Short beepScreenManager item selected.
ScreenManager parameter adjusted to minimum or maximum limit.
Input Signal Selection Button pressed.
Long beep Auto Adjustment Button pressed....