Eizo Coloredge Ce210w Users Manual

2. CABLE CONNECTION
11

2. CABLE CONNECTION
2-1. Before Connecting
Before connecting your monitor to the PC, change the display screen settings (Resolution and frequency) 
in accordance with the charts below.
Tips
•  It is recommended to use this monitor in the digital signal input.
• When your computer and display support VESA DDC, the suitable resolution and the refresh rate are 
set by just plugging your display into the computer without any manual settings.
Analog Input
CE210W
Resolution...

12
2. CABLE CONNECTION

Digital Input
The monitor supports the following resolutions only.
CE210W
ResolutionFrequencyDot ClockRemarks
640×48060Hz
120 MHz (Max.) VGA
720×40070Hz
VGA TEXT
800×60060HzVESA
1024×76860HzVESA
1280×96060HzVESA
1280×102460Hz VESA
1680×105060HzVESA CVT RB 
(Reduced Blanking)
CE240W
ResolutionFrequencyDot ClockRemarks
640×48060Hz
162 MHz (Max.) VGA
720×40070Hz
VGA TEXT
800×60060HzVESA
1024×76860HzVESA
1280×96060HzVESA
1280×102460Hz VESA
1600×120060HzVESA
1680×105060HzVESA CVT,...

2. CABLE CONNECTION
13

Analog Input
Signal CableConnector of the PCPC
Signal Cable (FD-C16 enclosed) Video Output Connector / D-Sub mini 15 
pin
Input Connector(monitor) / DVI
• Standard graphics card
• Power Macintosh G3 
(Blue & White) / 
 
Power Mac G4 (VGA)
Digital Input
Signal CableConnector of the PCPC
Signal Cable (FD-C39 enclosed) Video Output Connector / DVI
Input Connector (monitor) / DVI • Digital Graphics card
• Power Mac G4/G5 (DVI)
NOTE
•
 The monitor is not compatible with a Power Mac...

14
2. CABLE CONNECTION

4  Lead the power cord and signal cable into the cable holder at rear of the monitor.
NOTE
• The cables are recommended to lead with slight sag for the smooth motion of the stand.
 
5  Adjust the "height", "front and back position" and "angle" of the monitor.
1. Adjust the height of the monitor. To heighten, push the monitor backward. To lower, pull 
the monitor forward.
2. Adjust the position and angle of the monitor. To adjust the angle of the monitor,...

2. CABLE CONNECTION
15

6  Turn on the monitor's Power switch and then turn on the PC's power.
The monitor's power indicator will light up (blue).
If an image does not appear, refer to the " 
7. TROUBLESHOOTING" for advice. 
Whenever finished, turn off the PC and the monitor.
Tips
•  When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is 
displayed for a few seconds on the right top corner of the screen.
• Adjust brightness of the screen...

16
2. CABLE CONNECTION

2-3. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on 
the back of the monitor.
Connecting Examples
SIGNAL1SIGNAL2
(Ex.1)Analog
D-Sub
mini 15
pinSignal Cable
 
(FD-C16 enclosed) 
Signal Cable
(FD-C39 enclosed) DVIDigital
(Ex.2)Analog
D-Sub
mini 15
pinSignal Cable
(FD-C16 enclosed) 
Signal Cable
(FD-C16 optional) D-Sub
mini 15
pin
Analog
(Ex.3)Digital
DVISignal Cable(FD-C39 enclosed) 
Signal Cable...

2. CABLE CONNECTION
17

Priority settingPerformance
1If signals from both inputs are present, the monitor gives preference to 
Signal 1 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 1 is changed even if active input was 
Signal 2.
2 If signals from both inputs are present, the monitor gives preference to 
Signal 2 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 2 is changed even if active...

18
3. ScreenManager 

3. ScreenManager
3-1. How to use the ScreenManager
ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast 
mode easily.
NOTE
•Main Menu and FineContrast Menu cannot be activated at the same time.
1  Entering the ScreenManager
Touch the Enter switch once to display the main menu of the ScreenManager.
2  Making Adjustments and Settings
1. Select the desired sub menu icon using the Directing switch and touch the Enter switch. The sub...

3. ScreenManager 
19

3-2. ScreenManager Adjustments and Settings
The following table shows all the ScreenManager's adjustment and setting menus. "*" indicates 
adjustments of analog input only and "**" indicates digital input only.
Main menuSub menu Reference
ScreenClock* 4-1. Screen Adjustment..
Phase*
Position
*
Resolution*
Range Adjustment*
Smoothing
Signal Filter*
Color(Custom)*1Brightness 4-3.Color Adjustment.
Temperature
Gamma
Saturation
Hue
Gain
6 Colors
Reset
PowerManager...

20
3. ScreenManager 

Tips
• When the main menu of ScreenManager is displayed on the screen, the FineContrast Menu cannot be 
activated.
Exit
Press the Enter switch to exit the menu.
FineContrast Mode
Selectable FineContrast modes are as follows.
ModeDescription
sRGB
To display the screen images based on those original colors (ex. over the Internet)
CustomTo adjust the color settings according to your preference
CALThe mode only for calibration software
Color Adjustment of the Mode Settings
,  and...