Epson AcuLaser C2800N User Manual

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh111
4. Select the Watermark check box, then click Watermark Settings.
5. Select a watermark from the Watermark drop-down list.
6. Select the location on the page where you want to print the watermark by dragging the 
watermark image on the preview window. To resize the watermark, drag its handle.
7. Adjust the image density of the watermark with the Intensity slide bar.
8. You can rotate custom text watermarks by inputting the degrees in the Angle box. Or select the 
Rotate by mouse check box, then rotate the text watermark with the pointer on the preview 
window.
9. Click OK to apply the settings.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh112
Making a new watermark
You can make a new text or image for a watermark with the following procedures.
To make a text watermark
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select the Basic Settings tab.
3. Click Stamp Function.
4. Select the Watermark check box, then click Watermark Settings.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh113
5. Click New/Delete.
6. Click Add Text on the User Stamp Setting dialog box.
7. Click the Text box to open the Text Input dialog box. Type the watermark text, then click OK to 
close the dialog box. Select the Font and Style, then click OK on the Edit Text dialog box.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh114
8. Type the file name in the Watermark box, then click Save.
Note:
❏To edit the saved text watermark, select it from the List box, then click Edit Text. After editing, be 
sure to click OK to close the dialog box.
❏To remove the saved text watermark, select it from the List box, then click Mark Delete. After 
removing it, be sure to click Save to close the dialog box.
9. Select a custom watermark, that has been saved, from the Watermark drop-down list on the 
Watermark Setting dialog box, and then click OK.
To make an image for a watermark
Before making a custom watermark, you should prepare a image file (PDF, PNG, or JPG).
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select the Basic Settings tab.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh115
3. Click Stamp Function.
4. Select the Watermark check box, then click Watermark Settings.
5. Click New/Delete.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh116
6. Click Add Image on the User Stamp Setting dialog box.
7. Select a image file (PDF, PNG, or JPG), then click Open.
8. Type the file name in the Watermark box, then click Save.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh117
Note:
To remove the saved text watermark, select it from the List box, then click Mark Delete. After removing 
it, be sure to click Save to close the dialog box.
9. Select the saved custom watermark from the Watermark drop-down list on the Watermark 
Setting dialog box, then click OK.
Using headers and footers
You can print a header or footer on the top or bottom of a page. The items that can be printed as a 
header or footer include user name, computer name, date, date/time, or collate number.
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select Basic Settings tab.
3. Click Stamp Function.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh118
4. Select the Header/Footer check box, then click Header/Footer Settings.
5. Select the items to be printed for the header and the footer from the drop-down list.
Note:
If you select Collate Number from the drop-down list, the number of copies is printed.
6. Click OK to apply the settings.
Duplex printing
Duplex printing prints on both sides of the paper. You can also do duplex printing manually 
without using the Duplex Unit. When printing for binding, the binding edge can be specified as 
required to produce the desired page order.
Printing with the Duplex Unit (models with Duplex Unit only)
Follow the steps below to print with the Duplex Unit.
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select Basic Settings tab.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh119
3. Click Duplex check box, select a Binding position from Left, Top, or Right.
4. Click the Duplex Settings button.
5. Specify the Binding Margin for the front and back sides of the paper.
6. Select whether the front or back side of the paper is to be printed as the Start Page.
7. When printing for binding as a booklet, select the Binding Method check box and make 
appropriate settings. For details about each setting, see online help.
8. Click Print to start printing.
Doing duplex printing manually (models without Duplex Unit only)
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select the Basic settings tab.
3. Select the Duplex (Manual) check box, then click Duplex Settings.
4. Select a Binding position from Left, Top, or Right.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh120
5. Specify the Binding Margin for the front and back sides of the paper.
6. Select whether the front or back side of the paper is to be printed as the Start Page.
7. When printing for binding as a booklet, select the Binding Method check box and make 
appropriate settings. For details about each setting, see online help.
8. Click Print to start printing. 
9. After printing on one side, reload the paper into the MP tray with the printed surface face-up 
as shown below. Then press the NStart/Stop button.
Note:
Straighten the paper before loading it. If curled paper is loaded, it may not feed correctly.