Epson Projector Emp Tw600 User Manual

About the Manuals and Notations Used
Types of Manual
The documentation for your EPSON projector is divided into the following two manuals. Refer to the 
manuals in the order given below.
Safety Instructions/World-Wide Warranty Terms
This manual contains information on using the projector safely, and also includes safety instructions, 
world-wide warranty terms booklet and a troubleshooting check sheet.
Be sure to read this manual thoroughly before using the projector.
User’s Guide (this manual)
This...

1
Checking the Components
When you unpack the projector, make sure that you have all these components.
If any of the components are missing or incorrect, please contact the place of purchase.
❏Projector (with lens cover)❏Remote control
❏Power cable (3.0m)
Connect to the projector and to a wall outlet.❏AA alkali batteries (2 pcs.)
Insert into the remote control.
❏Safety Instructions/World-Wide
Warranty Terms
❏User’s Guide
❏Quick Start Guide
* Some regions may not have the quick start guide
included as...

2
Table of Contents
■Features of the Projector ............................. 4
■Part Names and Functions .......................... 6
Front / Top .................................................... 6
Control panel ................................................ 6Remote control ............................................. 7
Rear .............................................................. 8
Base ............................................................. 8
■Appearance...

3
Table of Contents
Basic 
Operations Appendix Troubleshooting Image Quality 
Adjustments Installing the 
Projector Configuration 
Menu
Troubleshooting
■Problem Solving ........................................ 35
Reading the indicators ............................... 35
•When the (warning) indicator is lit or 
flashing ...............................................................35
•When the (operation) indicator is lit or 
flashing ...............................................................36
When...

4
Features of the Projector
Image appearance can be selected to match the 
projection environment (Color Mode)
Sophisticated colour adjustment
The optimum images for the location can be projected simply by selecting the desired colour mode from the 
following seven preset modes.
If Natural, Theatre, Theatre Black 1, Theatre Black 2 or sRGB     is selected, the Epson Cinema 
Filter effect is applied automatically to increase the contrast and to make skin tones appear with more natural 
tints.       p.18...

5
Features of the Projector
Equipped with a wide-
angle lens shift function
The lens shift function allows the position of the 
projected images to be adjusted vertically and 
horizontally without distorting the images.
This can allow the projector to be set up with greater 
freedom, even if it is suspended from a ceiling or at 
an angle to the screen.       p.16
For zoom adjustment, 1.5x short throw zoom lens is provided. 
Images can be projected onto an 100 screen (16:9 screen 
only) even at a distance...

6
Part Names and Functions
Front / Top
Control panel
Buttons with no explanation function in the same way as the corresponding buttons on the remote
control. Refer to Remote control for further details on these buttons.
•Front adjustable feet p.17
Extend to adjust the projection angle so that the 
projector is horizontal when placed on a desk top.
•Control panelSee below
•Air exhaust vent
•Remote control light-
receiving area 
p.13
Receives signals from the 
remote control.
•Vertical lens adjustment...

7
Part Names and Functions
Remote control
•Remote control light-
emitting area p.13
Outputs remote control signals.
•On/Off buttons p.14
Turns the projector power on/off.•Indicator
Illuminates when remote control 
signals are being output.
•Memory button p.24
Retrieves stored memories.
•Menu button  p.34
Displays the full-screen 
configuration menus.
•Select/Line menu button 
p.18, 24
, 34
Displays the line menu.
When viewing a menu, press this 
button to select the menu item and 
proceed to the next...

8
Part Names and Functions
Rear
Base
•[SCART] input port p.12
Connects to the SCART ports of 
other video equipment using the 
D4 SCART adaptor that is 
packed with the projector. 
•[Trigger out] port
When the projector power 
is turned on, a 12 V DC 
signal is output from this port. 
When the projectors power is 
turned off or a problem with 
operation occurs, the output 
becomes 0 V to send the 
projectors power ON/OFF 
status to an external device.
•[Video] input port  p.12
Connects to general video...