Epson Projector Emp Twd3 User Manual

							9
To p
vFocus ring sp. 15
vZoom ring sp. 15
vVertical lens shift 
dial sp. 15
vStatus display indicator
sp. 58vHorizontal lens shift dial sp. 15
vLamp cover sp. 64
vSkip buttons sp. 18
vPower button
sp. 13, 16vPlay/Pause button 
sp. 14, 17vBreak button
sp. 19vImage On/Off button
sp. 23 vSource button
sp. 42vStop button
sp. 16vVo l u m e  
adjustment 
buttons
sp. 15vImage On 
indicator
sp. 59
vImage Off 
indicator
sp. 13, 16, 59 
						

							10
Remote control
vRemote control 
light-emitting area
sp. 16vFunction/numerics toggle switchsp. 17, 21
sp. 14
sp. 34sp. 35
sp. 61sp. 19
sp. 20sp. 28
sp. 46sp. 47
sp. 54, 56sp. 30, 31
sp. 36sp. 18
sp. 46sp. 15
sp. 19
Handy functions
Buttons used when adjusting 
audio
sp. 32
sp. 33
sp. 33
Buttons used when adjusting DVD 
video
sp. 42
sp. 19
sp. 23
Useful functions
sp. 14, 16sp. 17, 18
sp. 17sp. 17
sp. 18sp. 18
sp. 16
sp. 21, 22sp. 21, 22
sp. 48sp. 22, 49
sp. 21
sp. 21
Buttons used during playback
sp. 56
sp. 54
sp. 54, 56
Buttons used when adjusting or 
checking the projection 
						

							11
At the time of purchase, the batteries are not installed into the remote control.
Insert the batteries provided with this unit, before use.
A Push in the catch on the rear of the remote control, then lift it 
upwards.
B Insert the batteries in their correct polarity.
C Close the battery cover.
Preparing the Remote Control
If delays in the responsiveness of the remote control occur, or if it does not 
operate after it has been used for some time, it probably means that the 
batteries are becoming flat. Replace the batteries. Have two spare AA-size 
(SUM-3) batteries ready to use when required.
Avoid allowing direct sunlight or fluorescent light to fall on the remote 
control light-receiving area of this unit.The signal from the remote control 
may not be able to be received.
Inserting the batteries
Check the positions of the (+) and (-) marks 
inside the battery holder to ensure the 
batteries are inserted the correct way.
Remote control usage range
7 m 7 m
Approx. 30°
Approx. 30°
Approx. 30°
Approx. 30°
7 m 7 m
Approx. 15°
Approx. 15°
Approx. 15°
Approx. 15°
Operable range (horizontal)
Operable range (vertical) 
						

							12
Quick Start
Playback procedure
No complicated connections are necessary.You don’t even need to select the television type or change the input.
You can enjoy your DVD’s on the big screen by following these four easy steps.
There is also a JVC original sound system compliant speaker built-in so you can appreciate natural, sweeter sounding 
audio.
Position in front of 
the screen.
sp. 13Connect the power 
cable then turn on 
the main power 
switch.
sp. 13Play a disc.
sp. 14Adjust the 
projection position, 
size, and volume.
sp. 15 
						

							13
Quick Start
APlace the unit in a position to project the 
best size image onto the screen.
The further this unit is moved away from the 
screen, the larger the projected image becomes.
For detailed projection distance values sp. 67
You can adjust the position of the projected 
image vertically and horizontally, by using the 
lens shift dial. sp. 15
BPosition this unit so that it is parallel to 
the screen.
Installation
Projection distance and screen size
*standard values
If this unit is not placed parallel to the screen, the 
projected image is distorted in the shape of a keystone.Screen
Connecting the power cable and turning the main power switch ON
Lit orange
Accessory
Remove the lens cover if it is attached.
At the time of purchase, the lens cover is not 
attached to the projector.
Connect the power cable.
Turn on the main power switch.
 and the Image Off indicator lights 
orange. 
						

							14
APress   to open the disc tray.
A beep sounds and the power comes on.
The same operation can be performed using   
on the remote control. 
BPlace the disc in the disc tray with the 
label facing upwards.
When using 8 cm discs, place the disc in the 
hollow in the center of the disc tray.
CPress   to close the disc tray.
Depending on the disc inserted, operation is as 
follows.
Excluding  : The projection lamp lights 
automatically, and projection begins.It takes a few 
seconds from when the lamp lights up until the 
projected image is brightly projected.
: Press   to commence audio 
playback.The projection lamp does not light. 
The same operation can be performed using   
on the remote control. 
Disc Playback
When a menu is displayed
 sp. 21
 
sp. 22
 
sp. 23
When using in high altitude areas of above 1500 m, 
set the “High Altitude Mode” to “On”. 
sp. 57
Playing a disc and projecting
The display window during 
playback
When playing 
When playing 
When playing 
When playing 
When playing 
Display window
Chapter numberElapsed playback 
time
Track number
Track numberElapsed playback 
time
Track numberElapsed playback 
time
File number
Group number 
						

							15
Quick Start
Adjust the volume and image being projected.
Adjusting the projection position and volume
Adjusting the size of the 
projected image (Zoom ring)Setting the focus
(Focus ring)
Adjusting the image 
position (lens shift)
You can move the position of the 
projected image up, down, left and 
right, using the lens shift.The range of 
movement is shown in the diagram on 
the right.
Adjusting the volume (Volume)
To increase the size, 
turn towards “W”. To decrease the size, turn 
towards “T”. 
* The clearest image is obtained when both 
the horizontal and vertical planes of the lens 
shift dial are centered.moves 
down
moves 
upmoves 
leftmoves 
right
Using the control 
panelUsing the remote 
control
Standard projection position
(when the lens shift dial is 
centered)
From the standard projection 
position the adjustable image 
shift range
* The image cannot be 
shifted beyond the 
horizontal and vertical 
limits.
Example) 
When shifting the 
maximum amount to the 
left or right on the 
horizontal plane, the 
vertical range of the shift 
is up to 36% of the height 
of the image.
When shifting the 
maximum amount up or 
down on the vertical 
plane, the horizontal 
range of the shift is up to 
17% of the width of the 
image.
When the markings meet, the 
image is centered. 
						

							16
Press .
 After stopping, when 
you press  , playback is resumed from the 
interrupted scene (resume).
ARemove the disc from the disc tray.
BPress .
CIf the lamp was on, the lamp turns off 
and the Image Off indicator on the main 
unit flashes orange (during cool-down).
“Now Cooling” is displayed in the display 
window. 
DThe confirmation buzzer beeps twice to 
indicate that cool-down has 
completed.Turn off the main power 
switch.
If you only press   to turn off the power, 
electricity continues to be consumed.
EReplace the lamp cover.
Keep the lens cover in place when the projector is 
not being used to protect the lens from dirt and 
damage.
Things to note when using resume
•Even if you press   and turn off the power, 
playback resumes when you press  .
•Resume cannot be used in the following 
situations.
- The disc is removed from the disc tray.
- After pressing   to turn off the power and 
pressing   to turn the power back on.
-   is pressed twice.
- If the main power switch is turned off.
•Resume cannot be used during program playback 
or random playback.
•The position from where playback resumes may 
be slightly different to where playback was 
stopped.
•The audio language, subtitle language, and angle 
settings are memorized along with the stopping 
position.
•It is possible that resume cannot be used if the 
disc is stopped when the disc menu is displayed.
Stopping playback
The Image Off indicator flashes orange to 
indicate that the internal lamp cooling function 
(cool-down) is taking place.The buttons on the 
remote control and the main unit are disabled 
when cool-down is taking place (approx. 9 
seconds).
Do not turn off the power or unplug the unit during cool-
down as this may reduce the lifespan of the lamp.
Turning off the power 
						

							17
Quick Start
From here on, operations are explained primarily using the buttons of the remote control.Where there is a button with the 
same marking on the main unit, that button can be used to the same effect.
Press   during playback.
•For the projector unit, press  .
•To resume playback, press  .
•Selects play/pause each time you press  .
Press   or   during playback.
•There are five levels of reverse/forward search 
speed that change each time the buttons are 
pressed.
•Press   to return to normal playback.
•For the main unit, keep pressing   or  . If 
you keep pressing   or   the reverse/
forward search speed advances from 5x to 20x.
Basic Operations During Playback
Set to the [Function] position before performing operations
Note the following points when pausing during a 
 slideshow.
- When you press   after pausing, playback 
restarts from the beginning of the next file.
- You cannot pause using   on the main unit.
 During forward/
reverse, sound is not output.
 During forward/reverse search, sound 
is output intermittently.
Temporarily freezing 
playback (pause)
Reverse search/forward 
search 
						

							18
Press  during playback.
Press   or   during playback.
If you press   once during chapter/track 
playback, playback returns to the start of the 
chapter or track being played.After this, playback 
returns to the start of the previous chapter/track 
each time you press   (Except for 
).After this, playback returns to the start 
of the previous chapter/track each time you press 
.
Press   during paused playback.
•A single frame is advanced each time you press 
. This unit does not have a frame return 
function.
•Press   to return to normal playback.
Set to the [Function] position before performing operations
•Depending on the type of disc, this operation 
may not be possible.
•You cannot return to the previous title.
• You can perform skip operations 
during playback.
• You can only perform 
skip operations during playback with the PBC 
function off.
• You can also use the   
buttons to skip during playback.
•Depending on the disc, certain operations may 
not be possible.
Reviewing playback from a 
position 10 seconds before
Skip
Frame advance