Epson Projector Emp Twd3 User Manual

							29
Advanced Operations
Repeat modes available during program play 
and random play
Canceling repeat play
•Press   repeatedly until “ ” is displayed on the screen.
•Turn off the power switch on the main unit.
• You cannot use the “Title repeat” function with some DVDs.
•
 To cancel repeat, press .
•Display the menu bar and move the pointer to   to select repeat 
play. 
sp. 34
Repeat modeScreen displayDisplay window 
display
Repeats the chapter/track designated when repeat 
play was selected
Repeats all tracks set during program play, or repeats 
all tracks in random play
Repeat OFF
not displayed
Repeat 
modeTrack 1Tr a c k  2Track 3Track 4Screen 
displayDisplay 
window 
display
Track repeat
Repeat all 
tracks
Repeat OFF
not 
displayed
Repeat play position 
						

							30
You can set titles, chapters, and tracks to playback in the order of your 
preference.
1Press  when stopped.
Each time you press  , the display window on the main unit changes 
as follows. Press repeatedly until “PRGM” is displayed. 
2Set the order according to the following screen explanations.
s “When using the numeric buttons” p. 21
3Press .
•Playback begins according to the order you set.
•Once the set playback is fully complete, playback ceases and 
“Program” is displayed. 
Canceling set items on the program screen individually
Set numbers are deleted one by one each time   is pressed.
Canceling all set items on the program screen
Press .
Also cancelled when the power to this unit is switched off.
Resuming normal playback
When stopped, press   repeatedly until the display window of the main unit 
returns to its normal display state.
In this case, the contents entered in the program screen remain in memory. Program 
play can be executed by pressing   again and selecting “PRGM”.
•A maximum of 99 titles, chapters or tracks can be selected. If you try to 
enter more than 99, “FULL” is displayed. 
• If the total of the set playback time 
exceeds 9 hours, 59 minutes and 59 seconds, “--:--” is displayed in the 
display window of the main unit, however, you can continue to perform 
the set order as it is.
• If you press  , instead of setting the chapter or track 
number, “ALL” is displayed and all of the chapters and tracks contained 
in that title/group are set.
•If stopped during program play mode, resume play cannot be used.
•Depending on the type of disc, you may not be able to use program play.
Playing in the order of your choice (program play)
Set to the [Function] position before 
performing operations
Program play
Random play sp. 31
Normal playback
Normal 
display 
						

							31
Advanced Operations
You can choose to play titles or chapters/tracks at random with this unit.
The playback order always changes when using random play.
1Press  when stopped.
Whenever you press   the display window display changes in the 
following way. Keep pressing until “RANDOM” is displayed.
  
2Press .
Once one title or track has finished, another title or track is played 
randomly.
Resuming normal playback
When stopped, press   repeatedly until the display window of the main unit 
returns to its normal display state.
•Random play is cancelled if the following operations are performed.
- The disc tray is opened.
- Power to this unit is switched off.
•Even if you press   repeatedly during random play, you cannot skip 
to the previously played content. It only returns to the start of the current 
chapter/track.
•If stopped during random play mode, resume play cannot be used.
Playback at random (random play)
Set to the [Function] position before 
performing operations
Program play sp. 30
Random play
Normal playback Normal 
display 
						

							32
When a disc has been recorded with multiple audio signals or languages, you 
can switch to the available audio signal or language of your preference.
1Press  during playback.
The current audio settings are displayed.
2While the audio settings are displayed, press   
repeatedly and select the desired setting.
Press   to change the setting.
3Wait a few seconds, or press  .
•You can also use the menu bar to change the setting. sp. 34
•If a language code (for example AA) is displayed 
sp. 51
• The meaning of the characters displayed during 
playback is as follows.
- ST: Stereo  - L: Left channel audio  - R: Right channel audio
Changing the audio language 
						

							33
Advanced Operations
You can choose whether or not to display subtitles for discs that have been 
recorded with subtitles. When a disc has been recorded with multiple language 
subtitles, you can switch to the available language of your preference.
1Press  during playback.
The current subtitle settings are displayed.
2While the subtitle settings are displayed, press   
repeatedly and select your language/OFF. Press 
 and select the subtitle language.
 If you press   repeatedly, you can select the subtitle type 
and subtitles display on/off.
3Wait a few seconds, or press  .
For discs that have been recorded with multiple camera angles, you can switch 
from the main angle to a different camera angle of your preference, such as 
from above, or from the right, during playback.
1Press  during playback.
The current angle is displayed.
2While the angle is displayed, press   repeatedly and 
select the desired angle.
Press   to change the setting.
3Wait a few seconds, or press  .
Changing the subtitles display
Changing the angle 
						

							34
1Press   twice during playback.
The following status bar and menu bar is projected.
2Press   until the pointer reaches the item you wish to 
use.
3Press .
•Press   once and the menu bar disappears.
•When stopped, some functions may not work.
•The status bar is not displayed when playing back cinemascope 
(letterbox)  . Although functions can be set in this state, when 
it is necessary to display the status bar, press   to return the aspect 
ratio to normal. Press   to return to the former aspect ratio.
Menu bar function list
Select the repeat mode.
sp. 28, 29
Set a time based start point.
sp. 26
 only.
During playback, select the chapter number you wish to play using 
the numeric buttons.
With the function/numerics toggle switch in the [123 ] position, enter 
the number in the following way.
Example)
5: 10:  → 20:  → 
If you make a mistake, enter the correct number once again.
Press .
Select the audio language/type.
sp. 32
Select to change the subtitles display.
sp. 33
Select the angle.
sp. 33
Making operations from the menu bar
Set to the [Function] position before 
performing operations 
						

							35
Advanced Operations
Auto stand-by: When playback has finished or been stopped, or an operation 
has not been performed for around 3 minutes, the power switches off 
automatically.
Sleep timer: Once the set time has elapsed, the power switches off 
automatically. You can prevent unneccesary power being consumed if you fall 
asleep while watching a movie.
You cannot use auto stand-by and sleep timer at the same time.
Press .
•Each time you press  , the mode name displayed on the image and 
in the display window changes as follows. Press repeatedly until the 
desired item is displayed.
•If you select something other than “A.STBY ON”, auto stand-by is 
cancelled. 
Setting auto stand-by
“A.STBY” flashes approximately 20 seconds before the power switches off.
Changing the sleep timer
Press   repeatedly and select the new time.
Checking the sleep timer setting
Once the sleep timer has been set, if you press   once, the set time is displayed 
in the display window and on the image.
Canceling the sleep timer
Perform either of the following operations.
Press .
Press   repeatedly until “SLEEP OFF” is displayed.
•Sleep timer settings are not memorized. If the power is switched off, the 
sleep timer is canceled.
•When in external video or computer mode, video is switched off 
automatically if no signal is input and no operations are performed for 30 
minutes. This function is performed regardless of the sleep timer settings.
•Auto stand-by cannot be used when in external video or computer mode.
•Auto stand-by does not work with discs that return to the menu once 
playback has completed.
Auto-standby, goodnight timer (Sleep timer) settings
Set to the [Function] position before 
performing operations
Auto stand-by is activated.
After 10 minutes have elapsed, the power 
switches off.
After 150 minutes have elapsed, the power 
switches off.
Sleep timer is cancelled. 
						

							36
To enjoy clearer images, enable Progressive mode.
When stopped, or when there is no disc loaded in the disc tray, 
press .
Whenever you press   the display window display changes in the 
following way. Press until “PROGRESSIVE” is displayed.
The projector automatically recognizes the aspect suitable for the input signal, 
and the image is projected at an appropriate aspect. When you want to change 
the aspect yourself or if the aspect is not correct, you can change it in the 
following way.
Press .
•Each time you press   the aspect name is displayed on the image 
and the aspect changes.
•The aspect for disk settings and image signals can be changed in the 
following way.
For better image quality (Progressive mode)
Set to the [Function] position before 
performing operations
All scan lines are displayed in one video 
field. This achieves a far superior image 
than interlacing.
Traditional video system. A single screen 
is made up of two video fields comprising 
the odd number of scan lines and the even 
number of scan lines, displayed 
alternately.
Changing the aspect ratio
Set to the [Function] position before 
performing operations 
						

							37
Advanced Operations
When projecting by using the built-in DVD player
When projecting component video (SDTV), S-video, or composite video 
images
* When projecting 525i/525p images, the aspect automatically changes as soon as the image signal changes.
When projecting component video (HDTV) images
When projecting computer images
When projecting wide panel computer images, it is fixed at normal (wide screen).
If the wide panel computer images are not projected at the correct aspect, press the  button to change to an 
appropriate aspect.
Screen SizeAspect
16:9Fixed at wide (16:9)
4:3
Normal         Wide          Zoom
Letterbox
Zoom                   Normal
Screen SizeAspect
4:3 Normal         Wide          Zoom
Letterbox Normal         Wide          Zoom
Screen SizeAspect
16:9 Fixed at wide (16:9) 
						

							38
You can lock the disc tray so that small children cannot interfere with it. The 
disc lock allows you to lock the tray when a disc has been inserted.
With the power turned on (  is lit green) press and hold   
on the main unit, then press  .
•“TRAY LOCK” is displayed in the display window on the main unit, 
and the disc tray is locked.
•To cancel the disc tray lock, follow the same procedure. 
“UNLOCKED” is displayed in the display window on the main unit, 
and the disc tray becomes unlocked. 
If a child turns the power on accidentally, and by some chance looks into the 
lens when the lamp is on, the strong light could cause blurred vision and so on. 
You can prevent such an accident by setting the child lock. 
When the power supply is ON (  is lit green on the projector) 
press and hold down   while holding down   on the 
projector.
•“CHILD LOCK” is displayed in the projector’s display window. Power 
cannot be turned on unless the   button on the projector is held down 
for about five seconds.
•When the child lock is set,   becomes invalid. The disk tray does not 
open when you press  .
•You can turn on the power from the remote control as usual.
•Use the same procedure to cancel the child lock. “UNLOCKED” is 
displayed in the projector’s display window and the child lock is 
released.
Tr a y  l o c k
Child lock