Fujifilm Camera X30 Owners Manual

							The following types of indicator may be displayed during shooting.
In the description that follows, all available indicators are shown for illustrative purposes;
the indicators actually displayed vary with camera settings.
Focus check
Date stamp
Location data download status
Monitor sunlight mode
Movie mode
Time remaining
Internal memory indicator *
Number of available frames
Image size /quality
Focus warning
White balance
Film simulation
Dynamic range
Temperature warning Exposure indicator
Aperture
Shutter speed
AE lock indicator
Shooting mode
Metering
Focus frame
Advanced Anti Blur
Continuous mode
Self-timer indicator
Macro (close-up) mode
Dual IS mode
Electronic level
Intelligent digital zoom
Shooting
002D0020 003300310020 002D  
						

							*  : indicates that no memory card is inserted and that pictures will be stored in the cameraʼs
internal memory.
The Viewfinder Display
When  [ON] is selected for  [SCREEN SET-UP]  > [EVF AUTOROTATE DISPLAYS]  in the
setup menu, the indicators in the  viewfinder automatically rotate to match camera
orientation.
The display in the LCD monitor is unaffected.
The brightness and clarity of the EVF and LCD monitor can be ad justed using the [SCREEN
SET-UP]  options in the setup menu.
Control lock
Silent mode indicator
Histogram
Distance indicator
Battery level
Sensitivity
Zoom indicator
Flash mode /Flash compensation
Microphone /remote release
Focus mode
Manual focus indicator
Focus indicator
Shooting
002D0020 003300320020 002D  
						

							See Also
[SCREEN SET-UP] (The Setup Menu)
Shooting
002D0020 003300330020 002D  
						

							The following types of indicator may be displayed during playback.
In the description that follows, all available indicators are shown for illustrative purposes;
the indicators actually displayed vary with camera settings.
Date and time
Intelligent face detection indicator
Red-eye removal indicator
Pro focus mode, pro low-light mode
Advanced filter
Motion panorama
Location data Battery level
Image size /quality
Film simulation
Dynamic range
White balance
Sensitivity
Exposure compensation
Playback
002D0020 003300340020 002D  
						

							Protected image
Silent mode indicator
Frame number
Gift image
Photobook assist
DPOF print indicatorAperture
Shutter speed
Playback mode indicator
Mark for upload to
Favorites
Playback
002D0020 003300350020 002D  
						

							Attaching the Strap
Inserting the Battery and a Memory Card
Charging the Battery
Tu r n i n g   t h e   C a m e r a   o n   a n d   O ff
Basic Setup
First Steps
002D0020 003300360020 002D  
						

							Attach the strap clips to the camera and then attach the strap.Open a strap clip.
Use the clip attaching  tool to open a strap clip, making sure t hat the tool and clip are in the
orientations shown.
Keep the tool in a safe place. You will need it to open the strap clips when removing
the strap.
1. 
Place the strap clip on an eyelet.
Hook the strap eyelet in the clip opening. Remove the tool, usi ng the other hand to keep the
clip in place.2. 
Pass the clip through the eyelet.
Rotate the clip fully through the eyelet until it clicks closed.3. 
Attaching the Strap
002D0020 003300370020 002D  
						

							Attach a protective cover.
Place a protective cover over the eyelet as shown, with the black side of the cover toward
the camera. Repeat Steps  1–4 for the second eyelet.4. 
Insert the strap.
Insert the strap through a protective cover and strap clip.5. 
Fasten the strap.
Fasten the strap as shown. Repea t Steps 5–6 for the second eyelet.6. 
Attaching the Strap
002D0020 003300380020 002D  
						

							To avoid dropping the camera, be sure the strap is correctly secured.
Attaching the Strap
002D0020 003300390020 002D  
						

							Insert the battery and memory card as described below.Open the battery-chamber cover.
Slide the battery-chamber latch as shown and open the battery-c hamber cover.
Do not open the battery-chamber cover when the camera is on. Failure to observe
this precaution could damage  image files or memory cards.
Do not use excessive force when  handling the battery-chamber cover.
1. 
Inserting the Battery and a Memory Card
002D0020 003400300020 002D