Fujitsu Fuji Xt10 Instruction Manual

5
Before You Begin
Parts of the Camera
 The Auto Mode Selector Lever The Auto Mode Selector Lever
Switch between auto and manual modes.
PositionPositionModeMode
Select from P (program AE), S (shutter-priority AE), A (aperture-priority AE), and M (manual) modes 
(P 51, 52, 53, 54).  Adjust shutter speed and aperture using program shift (mode  P) or set shutter speed and/or 
aperture manually (modes S, A, and M).
Auto mode.  When the drive dial is rotated to S, the camera adjusts settings automatically...

6
Parts of the Camera
 The Front Command Dial The Front Command Dial
Rotate the front command dial to choose the 
desired combination of shutter speed and ap-
erture (program shift; P 51), fi ne-tune shut-
ter speed (P 52, 54), or view other pictures in 
playback mode (P 32).
Press the center of the dial to access 
the function assigned to the Fn2 button 
(P 42,  44).
 The Rear Command Dial The Rear Command Dial
Rotate the rear command dial to adjust aper-
ture (P 12, 53), select options in the quick...

7
Before You Begin
Parts of the Camera
 The LCD Monitor The LCD Monitor
The LCD monitor can be tilted for easier viewing.
Pinch point
When tilting the monitor, be careful that your fi ngers and other objects do not get caught between the monitor and When tilting the monitor, be careful that your fi ngers and other objects do not get caught between the monitor and the camera body.  Do not touch the wires behind the display; failure to observe this precaution could cause camera the camera body.  Do not...

8
Parts of the Camera
 Camera Displays Camera  Displays
The following types of indicator may be displayed during shooting and playback.  In the description that 
follows, all available indicators are shown for illustrative purposes; the indicators actually displayed vary 
with camera settings.  Note that the LCD monitor and electronic viewfi  nder have diff  erent aspect ratios.
 
■  Shooting:  Viewfi  nder/LCD  Monitor
P4000 5.6 400 

9
Before You Begin
Parts of the Camera
A Focus check ....................................................... 72
B Depth-of-fi eld preview ..................................... 53
C Location data download status ....................... 113
D Movie mode ...................................................... 97
E Time remaining ................................................ 37
F Number of available frames ............................ 144
G Image quality and size ...................................... 94
H...

10
Parts of the Camera
 
■  Playback
100-0001100-000112/31/2050 10:00 AM12/31/2050 10:00 AM
1/40001/40005.65.6400400
A Date and time ............................................. 23, 24
B Intelligent face detection indicator ................... 92
C Red-eye removal indicator .............................. 102
D Advanced fi lter ................................................. 67
E Location data .................................................. 113
F Protected image...

11
Before You Begin
 Parts of the Lens Parts of the Lens
A Lens hood
B Mounting marks
C Focus ring
D Zoom ring
E Aperture ring
F O.I.S. switch
G Aperture mode switch
H Lens signal contacts
I Front lens cap
J Rear lens cap
Removing the CapsRemoving the Caps
Remove the caps as shown.
 
Q Lens caps may diff  er from those shown.
Attaching the HoodAttaching the Hood
When attached, lens hoods reduce glare and pro-
tect the front lens element.
LensesLenses
The camera can be used with lenses for the FUJIFILM...

12
Lenses
 Lenses with Aperture Rings Lenses with Aperture Rings
At settings other than A, you 
can adjust aperture by rotat-
ing the lens aperture ring (ex-
posure modes A and M).
Aperture ring
A161185.642.8
A161185.64
  The Aperture Mode Switch  The Aperture Mode Switch
If the lens has an aperture mode switch, aperture can 
be adjusted manually by sliding the switch to  Z and 
rotating the aperture ring.
Aperture ring
Aperture mode switch
 
Q When the aperture ring is set to A, rotate the rear 
command...

13
Before You Begin
Lenses
 Lenses with O.I.S. Switches Lenses with O.I.S. Switches
If the lens supports optical image stabilization 
(O.I.S.), the image stabilization mode can be cho-
sen in the camera menus.  To activate image sta-
bilization, slide the O.I.S. switch to ON.
O.I.S. switch
Manual Focus LensesManual Focus Lenses
Slide the focus ring to the front for 
autofocus.
For manual focus, slide the focus ring 
to the back and rotate it while check-
ing the results in the camera display.  
The focus...

14
First StepsFirst Steps
 Attaching the Strap Attaching the Strap
Attach the strap clips to the camera and then attach the strap.
 1  Open a strap clip.Use the clip attaching tool to open a strap clip, 
making sure that the tool and clip are in the 
orientations shown.
 
Q Keep the tool in a safe place.  You will need it to 
open the strap clips when removing the strap.
 2  Place the strap clip on an eyelet.
Hook the strap eyelet in the clip opening.  Re-
move the tool, using the other hand to keep 
the...