Fujitsu Fuji Xt10 Instruction Manual

25
First Steps
 Display Settings Display  Settings
The camera is equipped with an electronic viewfi nder (EVF) and an LCD monitor (LCD).
 Choosing a Display Choosing a Display
Press the VIEW button to cycle through displays as shown below.
EE EYE SENSOR EYE SENSOR: Automatic display selection using eye sensor
LCD
EVFEVF
EVF ONLY: Viewfi nder only
EVF ONLY + E: Viewfi nder only; eye  sensor turns display on or off 
EVF
LCDLCD ONLY: LCD monitor only
    The Eye Sensor  The Eye Sensor
The eye sensor turns...

26
Display Settings
 The Viewfi  nder Display The Viewfi  nder Display
When ON is selected for A  SCREEN SET-UP > 
EVF AUTOROTATE DISPLAYS in the setup 
menu
 ( P 108), the indicators in the viewfi nder 
automatically rotate to match camera orientation.
M4000 5.6 400Orientation changed from “wide” to “tall”
4000 5.6
400
 
Q The display in the LCD monitor is unaff  ected.
Focusing the Viewfi  nderFocusing the Viewfi  nder
The camera is equipped with diopter adjustment 
in the range –4 to +2 m
–1 to...

27
First Steps
 The  The DISP/BACKDISP/BACK Button Button
The DISP/BACK button controls the display of indicators in the view-
fi nder and LCD monitor.
 
■ Viewfi nder: Shooting
Standard Information off 
P5.6400
4000
 
■ LCD Monitor: Shooting
Standard Information off 
P5.6400
4000
5.6 400
4000
Info display 

28
The DISP/BACK Button
 
■  Customizing the Standard Display
To choose the items shown in the standard display:
 1  Display standard indicators. Press the DISP/BACK button until standard indicators are displayed.
 2 Select  DISP. CUSTOM SETTING .
Select  A SCREEN SET-UP > DISP. CUSTOM SETTING in the setup menu.
 3 Choose items.
Highlight items and press MENU/OK to select or deselect.
•  Framing grid ( P 109)
•  Virtual horizon ( P 29)
•  Focus frame
•  Focus distance (autofocus)
•  Focus distance...

29
First Steps
The DISP/BACK Button
    Virtual Horizon Virtual Horizon
Selecting  ELECTRONIC LEVEL displays a virtual horizon.  The camera is level when the two 
lines overlap.
 
R The virtual horizon may not be displayed if the camera lens is pointed up or down.
P
 
■ Viewfi  nder/LCD Monitor: Playback
Standard Information off Info  display Favorites12/31/2050 10:00 AM
1 / 4 0 0 01/4000+21/3+21/34004005.65.6
12/31/2050 10:00 AM
NEXT
1/4000 5.6 400 +21/3
12/31/2050 10:00 AM
FAVORITES
    Histograms...

30
Basic Photography and PlaybackBasic Photography and Playback
Taking PhotographsTaking Photographs
This section describes how to take pictures using program AE (mode P).  See pages 51 – 54 for 
information on S,  A, and M modes and pages 50 and 55 for information on the options available in auto 
mode.
 1  Adjust settings for program AE.
C
D
EA
B
A Shutter speed   (P 51):  Select  A (auto)
B Auto mode selector lever   (P 50):  Select z
C DRIVE dial  (P 64):  Select  S (single frame)
D Focus mode  (P...

31
Basic Photography and Playback
Taking Photographs
   2  Ready the camera.Hold the camera steady 
with both hands and brace 
your elbows against your 
sides.  Shaking or unsteady 
hands can blur your shots.
To prevent pictures that 
are out of focus or too dark 
(underexposed), keep your 
fi ngers and other objects 
away from the lens, fl ash, 
and AF-assist illuminator.
 3  Frame the picture.
    Lenses with Zoom Rings  Lenses with Zoom Rings
Use the zoom ring to frame 
the picture in the display.
A...

32
 Viewing Pictures Viewing  Pictures
 Viewing Pictures Full Frame Viewing Pictures Full Frame
Pictures can be viewed in the viewfi nder or LCD monitor.  When taking important pictures, take a test 
shot and check the results.
To view pictures full frame, press a.
100-0001
Additional pictures can be viewed by pressing the selector left or right or rotating the front 
command dial.  Press the selector or rotate the dial right to view pictures in the order re-
corded, left to view pictures in reverse...

33
Basic Photography and Playback
Viewing Pictures
Viewing Photo InformationViewing Photo Information
The photo information display changes 
each time the selector is pressed up.
Basic dataInfo display 112/31/2050 10:00 AM
1 / 4 0 0 01/4000+21/3+21/34004005.65.6
12/31/2050 10:00 AM
NEXT
1/4000 5.6 400 +21/3
1/4000S.S5.6F400 +21/3ISO
LENS23.0mm
F5.6FOCAL LENGTH23.0mm
COLOR SPACE sRGBLENS MODULATION OPT.ON
NEXTInfo display 2
 
R Rotate the front command dial to view other im-
ages.
    Zooming in on the...

34
Viewing Pictures
 Playback Zoom Playback  Zoom
Rotate the rear command dial right to zoom in on the current picture, left to zoom out (to view mul-
tiple images, rotate the dial left when the picture is displayed full frame; P 35).  When the picture is 
zoomed in, the selector can be used to view areas of the image not currently visible in the display.  To 
exit zoom, press DISP/BACK, MENU/OK, or the center of the rear command dial.
Zoom indicator
Navigation window shows 
portion of image currently...