Fujitsu Fuji Xt10 Instruction Manual

15
First Steps
Attaching the Strap
 5  Insert the strap.Insert the strap through a protective cover 
and strap clip. 6  Fasten the strap.Fasten the strap as shown.  Repeat Steps 5–6 
for the second eyelet.
 
Q To avoid dropping the camera, be sure the strap is 
correctly secured. 

16
 Attaching a Lens Attaching a Lens
Lenses attach as described below.
 
Q Care is required to prevent dust or other particles from entering the camera while attaching and removing lenses.
 1  Remove the body and rear caps.
Remove the body cap from the camera and 
the rear cap from the lens.
 
Q Do not touch the camera’s internal parts.
 2  Attach the lens.
Place the lens on mount, keeping the marks 
on the lens and camera aligned, and then ro-
tate the lens until it clicks into place.
 
Q Do not press...

17
First Steps
 Charging the Battery Charging the Battery
The battery is not charged at shipment.  Before use, charge the battery in the supplied battery charger.
 1  Place the battery in the charger.Place the battery in the supplied battery char-
ger as shown.
Battery charger
Battery
Charge lamp
Arrow
The camera uses an NP-W126 rechargeable bat-
tery.
 
R The supplied AC cord is for use exclusively with 
the supplied battery charger.  Do not use the 
supplied charger with other cords or the sup-
plied...

18
 Inserting the Battery and a Memory Card Inserting the Battery and a Memory Card
The camera has no internal memory; instead, pictures are stored on optional SD, SDHC, and SDXC 
memory cards (sold separately).  After charging the battery, insert the battery and memory card as 
described below.
   1  Open the battery-chamber cover.Slide the battery-chamber latch as shown and 
open the battery-chamber cover.
 
Q Do not open the battery-chamber cover when 
the camera is on.  Failure to observe this...

19
First Steps
Inserting the Battery and a Memory Card
   3  Insert the memory card.Holding the memory card in the orientation 
shown, slide it in until it clicks into place at the 
back of the slot.
Click!
 
Q  Be sure card is in the correct orientation; do not 
insert at an angle or use force.
 
Q  SD/SDHC/SDXC  memo-
ry cards can be locked, 
making it impossible to 
format the card or to 
record or delete images.  
Before inserting a memory card, slide the write-
protect switch to the unlocked...

20
Inserting the Battery and a Memory Card
    Removing the Battery and Memory Card  Removing the Battery and Memory Card
Before removing the battery or memory card,  turn 
the camera off   and open the battery-chamber cover.
To remove the battery, press the 
battery latch to the side, and 
slide the battery out of the cam-
era as shown.
Battery latch
To remove the memory card, 
press it in and release it slowly.  
The card can then be removed 
by hand.  When a memory card 
is removed, the card could be...

21
First Steps
Inserting the Battery and a Memory Card
 
■  Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the cam-
era.  A complete list of approved memory cards is available at  http://www.fujifilm.com/support/digital_
cameras/compatibility/.  Operation is not guaranteed with other cards.  The camera can not be used 
with xD-Picture Cards or MultiMediaCard (MMC) devices.
  QQMemory CardsMemory Cards
•  Do not turn the camera off  or remove the...

22
 Turning the Camera on and Off  Turning the Camera on and Off 
Rotate the ON/OFF switch to ON to turn the camera on.  Select  OFF to 
turn the camera off  .
 
R Press the a button to start playback.  Press the shutter button halfway 
to return to shooting mode.
 
R The camera will turn off   automatically if no operations are performed 
for the length of time selected for  Z POWER MANAGEMENT  > AUTO 
POWER OFF  (P 111).  To reactivate the camera after it has turned off  automatically, press the...

23
First Steps
 Basic Setup Basic  Setup
A language-selection dialog is displayed the fi rst time the camera is turned on.
 1  Choose a language.
START MENU
NOSETENGLISH
FRANCAIS
DEUTSCH
Highlight a language and press MENU/OK.
 
R Press  DISP/BACK to skip the current step.  Any steps you skip will be dis-
played the next time the camera is turned on.
 2  Set the date and time.
NOSET
YY.  MM.  DD
DATE / TIME NOT SET
 1.   1201512 : 00AM2014
2013 2017
2016
Press the selector left or right to highlight the...

24
Basic Setup
 Changing Basic Settings Changing Basic Settings
To change the language or reset the clock:
 1  Display the desired option.Display the setup menu and select Q  a to change the language or F  DATE/TIME to 
reset the clock (P 105).
 2 Adjust settings. To choose a language, highlight the desired option and press MENU/OK.  To set the clock, press the 
selector left or right to highlight the year, month, day, hour, or minute and press up or down to 
change, then press MENU/OK once the clock has...