Fujitsu Lpf-D711 Users Manual

							English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-2
SAFETY PRECAUTIONS
Dear Customer:
We have prepared this USER'S MANUAL to assist you in the operation of your new LCD Projector. We thank you for your purchase and
hope you will be satisfied with the quality and performance of this projector. Please read the instructions carefully, and keep them 
available for future reference.
• A Class A digital device
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.  These 
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment.  This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to 
cause harmful interference in which case the user will be required to correct the interference at his own expense.
• A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These 
limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Electrical energy can perform many useful functions.  This unit has been engineered and manufactured to assure your personal safety.  But 
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD.  In order not to defeat the safeguards 
incorporated into this product, observe the following basic rules for its installation, use and service.  Please read these “Important Safeguards” 
carefully before use.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier’s) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A 
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the 
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from 
the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
IMPORTANT INFORMATION
IMPORTANT
The lightning flash with arrowhead symbol, within 
an equilateral triangle, is  intended to alert the user 
to the presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of  
sufficient magnitude to constitute a risk of electric 
shock to persons.CAUTION:
TO PREVENT THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR 
BACK). NO USER-SERVICEABLE PARTS 
INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.
WARNING:THIS UNIT HAS AN EXTREMELY BRIGHT LIGHT SOURCE. DO NOT STARE INTO THE BEAM OF LIGHT.
BE ESPECIALLY CAREFUL THAT CHILDREN DO NOT STARE DIRECTLY INTO THE LIGHT.
WARNING:TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
FCC NOTICE
IMPORTANT SAFETY INSTRUCTIONS
RISK OF ELECTRIC SHOCK.
DO NOT REMOVE SCREWS EXCEPT 
IF SPECIFIED USERSERVICE 
SCREWS MARKED  
						

							E-3
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-4
INFORMATION
• Receptacle
Make sure that the power cable’s grounding wire is grounded.
The display comes with a 3-prong power plug; one prong is connected to the grounding wire.  If you have only a 2-hole receptacle, you 
will need to have it replaced.  Contact your dealer for more information.
• Have the display inspected and cleaned by your dealer at regular intervals.
• The liquid crystal panels are manufactured with very precision techniques resulted in 99.99% or more effective pixels. Please understand 
that some panels lack 0.01% or less pixels and keep the light on at all times.
• This projector is equipped with a heat-emitting fan for prevention of increasing temperature inside during operation. Note that heated air 
blows out of the fan.
• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.
You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote 
control does not function properly.
• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal.  In this case, contact your dealer for 
more information.
• The protective circuit, built into the display, automatically turns off the power if the display has a problem.  In this case, you will see that 
the power indicator lamp flashes red or green.
• The ventilation should not be impeded by covering the ventilation openings with items , such as newspapers , table-cloths, curtains,etc.:
– no naked flames sources , such as lighted candles, should be placed on the apparatus:
– no object filled with liquids, such as vases, shall be placed on the apparatus.
• Install the display in a location close to a main power supply outlet, and where the emergency stop button can be easily reached. Warning
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem.  When this happens, be sure to remove the 
power plug from the receptacle to prevent fire or electric shock.  Then contact your dealer.
Note
• Cables for connecting the display to external equipment are not supplied.  Contact your dealer for more information on these products.
• For clarity of explanation, the devices, accessories, etc. depicted in the photographs and illustrations included herein may differ from the actual ones 
in some way or other. 
						

							E-5
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-6
ADDITIONAL PRECAUTIONS
When transporting the projector unit, take care not to apply undue force to it.  Otherwise, lens and other breakable parts may be damaged.
• The light source lamp loses its brightness with use.  When the lamp replacement warning 
is given, or when the lamp will not light, the picture becomes dim or its color becomes 
dull, replace the lamp with a new one. (The light source lamp for replacement can be 
purchased from your dealer.)
• When the warning message at right is shown, replace the light source lamp with a new 
one.
• For the method of replacing the light source lamp, see page E-56.
• Make sure that the grounding work should be performed only by a professional electrician.
• Be sure to make the grounding connection before inserting the power plug into the receptacle.  When removing the grounding 
connection, pull out the power plug from the receptacle beforehand.
TRANSPORTATION
LIGHT SOURCE LAMP
GROUNDING
Warning display for light source lamp 
replacementApproaching Recommended 
Lamp Life
Note
• Turning on and off the power frequently will slightly shorten the life of the light source lamp. 
• This device conforms to the harmonic guideline. 
						

							E-7
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-8
ADDITIONAL PRECAUTIONS (Continued)
Both the projector and AV selector have a signal receiver for the wireless remote control on their front.  If a strong light such as fluorescent 
light strikes upon the signal receivers, the wireless remote control may not work properly.  In that case, keep the projector unit away from 
the illumination source such as fluorescent light, or re-install it at a place where light will not directly strike on the signal.
To keep the projector unit away from the illumination source:
As a guideline, keep the projector unit more than 2 m away from the illumination 
source such as fluorescent light.  Also, check that the signal receivers are not 
exposed to direct sunlight.
This projector unit uses an LCD panel to project pictures on the screen.  Please note, therefore, that the projected picture may differ from 
that of the CRT indicator lamp of television and personal computer in color tone and contrast.
When purchasing a projection screen, carefully check the characteristics to select one that best suits your purpose of use.  Do not use a 
polarizing screen with the projector unit.  The screen may be tinged with red.
Using a mobile phone, transceiver and other device emitting radio waves near the projector unit may disturb the picture.  When using those 
devices, keep a sufficient distance from the projector unit.
ILLUMINATION NEAR THE PROJECTOR UNIT
PICTURE CHARACTERISTICS
PROJECTION SCREEN
USE OF A MOBILE PHONE NEAR THE PROJECTION UNIT
Illumination source
More than 
2 m 
						

							E-9
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-10
INSTALLATION (Continued)
• Three types of installation are available; front projection, rear projection and ceiling mount projection.
• By adjusting the zoom (see page E-31), the screen size can be selected as shown in the table below.
• By adjusting the lens shift (see page E-31), a suitable projection position can be selected on the screen.
• Projectors have an error of 5% in projection distance and lens shift.
• Optimum projection screen size is 120 to 150 inches.
* "Angle of view" refers to the length of diagonal line of the projected screen.
PROJECTION
Projected screen size Projection distance Lens shift
Angle of view (inch)Height (cm) Width (cm)Minimum (m)-Maximum (m)Vertical (cm)Horizontal (cm)
60 74.7 132.8 2.26-2.85 4.15 7.52
70 87.2 155.0 2.65-3.35 4.85 8.78
80 99.6 177.1 3.04-3.84 5.54 10.03
90 112.1 199.2 3.43-4.34 6.23 11.28
100 124.5 221.4 3.82-4.84 6.92 12.54
110 137.0 243.5 4.21-5.33 7.62 13.79
120 149.4 265.7 4.60-5.83 8.31 15.05
130 161.9 287.8 4.99-6.32 9.00 16.30
140 174.3 309.9 5.38-6.82 9.69 17.55
150 186.8 332.1 5.77-7.32 10.38 18.81
160 199.2 354.2 6.16-7.81 11.08 20.06
170 211.7 376.3 6.55-8.31 11.77 21.32
180 224.1 398.5 6.94-8.80 12.46 22.57
190 236.6 420.6 7.33-9.30 13.15 23.82
200 249.1 442.8 7.72-9.80 13.85 25.08
Projection distance Lens shift 
Ve r t i c a lLens shift Horizontal
Projection area on the screen before adjustmentLens shift Horizontal