GE Cpv14di018 Manual

							2004/11 – Subject to change – Info 20141
Fieldbus Direct, CPV-IB
Technical data – Fieldbus node CPV-IB
Connection and display components
1
2
4
5 3
6
789
1Red LED: Dia (diagnosis)
2Green LED: Pow (power supply
indicator)
3Green LED: RC (remotebus check)
4Green LED: UL (voltage supply to
Interbus)
5Green LED: BA (bus active)
6Yellow LED: RD (remotebus
disable)
7Switching status displays of CPV
solenoid coils
8CP extension connection
9Interbus connection
Pin allocation for Interbus interface, incoming (plug view)
PinSignalDesignation
1DO1Data out
2/DI1Data in
3GNDReference conductor/earth
4n.c.Not connected
5n.c.Not connected
6/DO1Data out inverse
7/DI1Data in inverse
8n.c.Not connected
9n.c.Not connected
HousingScreenConnection to functional earth via R-C combination
Pin allocation for Interbus interface, outgoing (socket view)
PinSignalDesignation
1DO2Data out
2/DI2Data in
3GNDReference conductor/earth
4n.c.Not connected
5+5 VStation detection1)
6/DO2Data out inverse
7/DI2Data in inverse
8n.c.Not connected
9RBSTStation detection1)
HousingScreenConnection to functional earth via R-C combination
1) The incoming interface is electrically isolated from the CPX peripherals. The plug housing is connected to the FE of the CPX terminal via an R-C combination.
The CPX terminal contains the protocol chip SUPI3 OPC. This ensures automatic detection ofadditional connected Interbus stations. There is therefore no need for a bridge between pin 5 and pin 9. 
						

							Info 201 – Subject to change – 2004/1142
Fieldbus Direct, CPV-IB
Accessories – Fieldbus node CPV-IB
Ordering data
DesignationTy p ePart No.
Power supply
Power supply socket, straightFBSD-GD-718 497
FBSD-GD-918 495
Power supply socket, angledFBSD-WD-718 524
FBSD-WD-918 525
Bus connection
Fieldbus plug, Sub-D connection for Interbus incomingFBS-SUB-9-BU-IB-B532 218
Fieldbus plug, Sub-D connection for Interbus outgoingFBS-SUB-9-GS-IB-B532 217
Mounting screw for standard Sub- D (IP20)UNC 4-40/M3x5340 960
Valve terminal connection
Connecting cable WS-WD0.5 mKVI-CP-1-WS-WD-0,5178 564g
1mKVI-CP-1-WS-WD-1.0191 892
2mKVI-CP-1-WS-WD-2163 139
3mKVI-CP-1-WS-WD-3.0191 893
5mKVI-CP-1-WS-WD-5163 138
Connecting cable GS-WD5mKVI-CP-1-GS-WD-5163 137
8mKVI-CP-1-GS-WD-8163 136
Connecting cable GS-GD2 m, for chain link trunkingKVI-CP-2-GS-GD-2170 234g
5 m, for chain link trunkingKVI-CP-2-GS-GD-5170 235
8 m, for chain link trunkingKVI-CP-2-GS-GD-8165 616
User documentation
UserdocumentationforCPVDirect,CPVfieldbusnodeGermanP.BE-CP-IB-DE527 515,
IBEnglishP.BE-CP-IB-EN527 516
SpanishP.BE-CP-IB-ES527 517
FrenchP.BE-CP-IB-FR527 518
ItalianP.BE-CP-IB-IT527 519
SwedishP.BE-CP-IB-SV527 520
Software
CD-ROMValve terminal user
documentation (PDF)P.CD-VALVE-T183 350
UtilitiesP.CD-VI-UTILITIES-2533 500 
						

							2004/11 – Subject to change – Info 20143
Fieldbus Direct, CPV-IL
Technical data – Fieldbus node CPV-IL
CPV fieldbus node for communication
between a CPV valve terminal and an
Interbus Loop bus terminal. The
fieldbus node is used for activation of
a CPV valve terminal with 8 valve
slices and 16 solenoid coils and for
displaying the switching status via
LED.
TheCPV-…valvesareactivatedusing
automatic current reduction, which
resultsinlesspowerconsumption
and heat emission.
The CPV fieldbus node supports the
fieldbus protocol Interbus Loop2.
TheCPVfieldbusnodeisavailablein
two sizes, with identical performance
characteristics:

CPV10

CPV14
Application
Bus connection
The Interbus loop connection uses
“Quick On” technology with one
connection each for the incoming and
outgoing bus respectively.
-H-Note
It is not possible to connect a CP
stringextensioninthiscase.
-U-Typ e to be di sco n t i n u ed
Available until 2007 
						

							Info 201 – Subject to change – 2004/1144
Fieldbus Direct, CPV-IL
Technical data – Fieldbus node CPV-IL
General technical data
Ty p eCPV10-GE-IL-8CPV14-GE-IL-4CPV14-GE-IL-8
Part No.175 406188 450175 408
CP string extensionNo
Baud rates[kbps]500
Protocol chipLPC2
Max. no. of loop stations63
Max. distance between 2 loop stations[m]20
Max. loop length[m]200
Max. loop current[A]1.8
Configuration supportIcon for CMD software
Max. no. of solenoid coils16
Max. no. of outputs0
Max. no. of inputs0
LED diagnostic displaysDIAGBus statusgpy
USUndervoltage
12Valve status display
14Valve status display
Device-specific diagnosisUndervoltage of valves
Operating voltageNominal value[V DC]24, reverse polarity protectedpgg
Permissible range[V]20 … 30
Power failure buffering[ms]20
Residual ripple[Vss]4
Current consumption[mA]Max. 100
Protection class to EN 60 529IP65
ApprovalCE
Temperature rangeOperating[°C]–5 … +50pg
Storage[°C]–20 … +70
MaterialsHousingDie-cast aluminium
Plug capPolyamide, glass fibre (Ultramide)
SealNitrile rubber, Neoprene
DimensionsInfo 213 Valve terminal CPV
WeightInfo 213
Technical data for valvesInfo 213
-U-Typ e to be di sco n t i n u ed
Available until 2007 
						

							2004/11 – Subject to change – Info 20145
Fieldbus Direct, CPV-IL
Technical data – Fieldbus node CPV-IL
Connection and display components
41
67
2
3
565
1BUS IN +
2BUS IN –
3BUS OUT +
4BUS IN –
524 V DC valve supply
60 V valve supply
7Earth terminal for valve supply
Power supply
The load supply for the valves is
supplied using a separate Quick On
connection, with one connection each
for the incoming and outgoing supply
respectively.
-U-Typ e to be di sco n t i n u ed
Available until 2007 
						

							Info 201 – Subject to change – 2004/1146
Fieldbus Direct, CPV-IL
Accessories – Fieldbus node CPV-IL
Ordering data
DesignationTy p ePart No.
Bus and power supply connection
Quick On connection setFBS-IBL-PG11/13175 485
User documentation
UserdocumentationforCPVDirect,CPVfieldbusnodeGermanP.BE-CP-IL-DE175 508,
ILEnglishP.BE-CP-IL-EN175 509
FrenchP.BE-CP-IL-FR175 510
ItalianP.BE-CP-IL-IT175 511
SpanishP.BE-CP-IL-ES175 512
SwedishP.BE-CP-IL-SV175 513
Software
CD-ROMValve terminal user
documentation (PDF)P.CD-VALVE-T183 350
UtilitiesP.CD-VI-UTILITIES-2533 500
-U-Typ e to be di sco n t i n u ed
Available until 2007 
						

							2004/11 – Subject to change – Info 20147
Fieldbus Direct, CPV-IP
Technical data – Fieldbus node CPV-IP
CPV fieldbus node for communication
between a CPV valve terminal and an
IP-Link coupler box. The fieldbus node
is used for activation of a CPV valve
terminal with 8 valve slices and
16 solenoid coils and for displaying
the switching status via LED.
TheCPV-…valvesareactivatedusing
automatic current reduction, which
resultsinlesspowerconsumption
and heat emission.
The CPV fieldbus node supports the
fieldbus protocol IP-Link.
TheCPVfieldbusnodeisavailablein
two sizes, with identical performance
characteristics:

CPV10

CPV14
Application
Bus connectionPower supply
The bus connection is established
using two IP-Link fibre optic cable
connectors.The bus connector plugs (with
protection class IP65) facilitate the
connection of the incoming and
outgoing fibre optic cable (FOC).The power is supplied via a 4-pin M8
connection (socket). The supply to the
internal logic is fully electrically
isolated from the supply to the
solenoid coils.The second M8 connection (pin)
allows power to be supplied to
additional CPV IP-Link valve terminals
and other IP-Link modules. 
						

							Info 201 – Subject to change – 2004/1148
Fieldbus Direct, CPV-IP
Technical data – Fieldbus node CPV-IP
General technical data
Ty p eCPV10-GE-IP-8CPV14-GE-IP-8
Part No.534 509534 507
CP string extensionNo
Fieldbus interfaceIP-Link
Incoming, outgoing
Baud rates[kbps]2000
Data modelCompact16 outputs
Complex24 inputs
24 outputs
Configuration supportProfibusGSD filegpp
InterbusNot necessary
CANopenEDS file
DeviceNetEDS file
Max. no. of solenoid coils16
LED diagnostic displaysUSOperating voltage, internal logicgpy
UPOperating voltage, valves
RUNBus active
ERRData transmission error
Device-specific diagnosisIn complex mode:
Monitoring of valve undervoltage
ParameterisationVia register communication:
Setting via watchdog for coils 1 … 16
Operating voltageNominal value[V DC]24, reverse polarity protectedpgg
Permissible range[V]20.4 … 28.8
Power failure buffering[ms]10
Residual ripple[Vss]4
Current consumptionLogic[mA]Max. 100p
ValvesDepending on valve type
Protection class to EN 60 529IP65
ApprovalCE
Temperature rangeOperating[°C]–5 … +50pg
Storage[°C]–20 … +70
MaterialsHousingDie-cast aluminium
Plug capPolyamide, glass fibre (Ultramide)
SealNitrile rubber, Neoprene
DimensionsInfo 213 Valve terminal CPV
WeightInfo 213
Technical data for valvesInfo 213 
						

							2004/11 – Subject to change – Info 20149
Fieldbus Direct, CPV-IP
Technical data – Fieldbus node CPV-IP
Connection and display components
1
2
3
4
5
6
1Connection for power supply,
incoming (M8, 4-pin, plug)
2Connection for power supply,
outgoing (M8, 4-pin, socket)
3LEDs:
–US:Operatingvoltage,
electronics (green)
– UP: Load voltage, valves
(green)
– RUN: Bus active (green)
– ERR: Error (red)
4Fieldbus connection, incoming
(IP-Link fibre optic cable IP65
socket)
5Fieldbus connection, outgoing
(IP-Link fibre optic cable IP65
socket)
6LEDs (yellow) for switching status
display of CP solenoid coils
Power supply, incoming
PinSignal
124 V DC operating voltage, electronics (US)
224VDCloadvoltage,valves(UP)
30 V electronics (US)
40Vvalves(UP)
Power supply, outgoing
PinSignal
124 V DC operating voltage, electronics (US)
224VDCloadvoltage,valves(UP)
30 V electronics (US)
40Vvalves(UP) 
						

							Info 201 – Subject to change – 2004/1150
Fieldbus Direct, CPV-IP
Technical data – Fieldbus node CPV-IP
Equipotential bonding
Example of connection with electrical isolation of operating and load voltage with 2 PELV power supply units
1
2
12
1412
14 12
14 12
14 12
14 12
14 12
14 12
14
Us
UpRun
ErrIP--L 24V
12
1412
14 12
14 12
14 12
14 12
14 12
14 12
14
Us
UpRun
ErrIP--L 24V
3412
3
1Power supply unit for load
voltage
2Device for isolation monitoring
3Power supply unit for operating
voltage
CPV Direct is prepared for the
connection with electrical isolation of
operating and load voltage.
Example of connection with PELV power supply unit and equipotential bonding
12
34 12
1PE and equipotential bonding
2Load voltage (can be
disconnected separately) plus
external fuses
TheCPVvalveterminalhasanearth
terminal for equipotential bonding on
the end plate.
Ordering data
DesignationTy p ePart No.
User documentation
UserdocumentationforCPVDirect,CPVfieldbusnode
IPGermanP.BE-CPV-DI-IP-DE534 516
IPEnglishP.BE-CPV-DI-IP-EN534 517
Software
CD-ROMValve terminal user
documentation (PDF)P.CD-VALVE-T183 350
UtilitiesP.CD-VI-UTILITIES-2533 500