GE Logiq P5 User Manual

Safety Precautions
LOGIQ 5 Basic User Manual 2-13
Direction 2300002-100 Rev. 2
Label Icon Description (continued)
ClassificationsType of protection against electric shock
Class I Equipment (*1)
Degree of protection against electric shock
Type BF Applied part (*2)
 (for PCG, Probes marked with BF symbol)
Type CF Applied part (*3) (for ECG marked with CF symbol)
Continuous Operation
System is Ordinary Equipment (IPX0)
Footswitch is IPX8
*1. Class I Equipment
EQUIPMENT in which protection against electric...

Safety
2-14 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
EMC (Electromagnetic Compatibility)
NOTE:  This equipment generates, uses and can radiate radio 
frequency energy. The equipment may cause radio frequency 
interference to other medical and non-medical devices and radio 
communications. To provide reasonable protection against such 
interference, this product complies with emissions limits for a 
Group 1, Class A Medical Devices Directive as stated in EN 
60601-1-2. However, there is no...

Safety Precautions
LOGIQ 5 Basic User Manual 2-15
Direction 2300002-100 Rev. 2
EMC (Electromagnetic Compatibility) (continued)
NOTE:  Do not use devices which intentionally transmit RF Signals 
(cellular phones, transceivers, or radio controlled products) in 
the vicinity of the equipment as it may cause performance 
outside the published specifications. Keep the power to these 
type devices turned off when near this equipment.
The medical staff in charge of this equipment is required to 
instruct...

Safety
2-16 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
EMC Performance (continued)
Portable and mobile radio communications equipment (e.g. two-
way radio, cellular/cordless telephones, wireless computer 
networks) should be used no closer to any part of this system, 
including cables, than determined according to the following 
method: 
CAUTIONDo not use devices which intentionally transmit RF signals 
(cellular phones, transceivers, or radio controlled products) in 
the vicinity of this...

Safety Precautions
LOGIQ 5 Basic User Manual 2-17
Direction 2300002-100 Rev. 2
Notice upon Installation of Product
Separation distance and effect from fixed radio communications 
equipment: field strengths from fixed transmitters, such as base 
stations for radio (cellular/cordless) telephones and land mobile 
radios, amateur radio, AM and FM radio broadcast, and TV 
broadcast transmitter cannot be predicted theoretically with 
accuracy. To assess the electromagnetic environment due to 
fixed RF...

Safety
2-18 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
General Notice
1.  Designation of Peripheral Equipment Connectable to This 
Product.
The equipment indicated in Chapter 13 can be hooked up to 
the product without compromising its EMC performance.
Avoid using equipment not designated in the list. Failure to 
comply with this instruction may result in poor EMC 
performance of the product.
2.  Notice against User Modification
The user should never modify this product. User 
modifications...

Safety Precautions
LOGIQ 5 Basic User Manual 2-19
Direction 2300002-100 Rev. 2
Peripheral Update for EC countries
The following is intended to provide the users in EC countries 
with updated information concerning the connection of the 
LOGIQ 5 to image recording and other devices or 
communication networks.
The LOGIQ 5 has been verified for overall safety, compatibility 
and compliance with the following on-board image recording 
devices:
•  Sony UP 895 MDW B&W Video Printer
•  Mitsubishi P91E B&W...

Safety
2-20 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Peripheral Update for EC countries (continued)
General precautions for installing an alternate on-board device 
would include:
1.  The added device must have appropriate safety standard 
conformance and CE Marking.
2.  The total power consumption of the added devices, which 
connect to the LOGIQ 5 and are used simultaneously, must 
be less than or equal to the rated supply of the LOGIQ 5.
3.  There must be adequate heat dissipation and...

Safety Precautions
LOGIQ 5 Basic User Manual 2-21
Direction 2300002-100 Rev. 2
Declaration of Emissions
This system is suitable for use in the following environment. The 
user must assure that it is used only in the electromagnetic 
environment as specified. 
Table 2-6: Declaration of Emissions
Emission TypeComplianceElectromagnetic Environment
CISPR 11 
RF EmissionsGroup 1 
Class AThis system uses RF energy only for its internal function. 
Therefore, RF emissions are very low and are not likely to cause...

Safety
2-22 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Declaration of Immunity
This system is suitable for use in the following environment. The 
user must assure that the system is used according to the 
specified guidance and only in the electromagnetic environment 
listed.
Table 2-7: Declaration of Immunity
Immunity TypeTest LevelComplianceEMC Environment and Guidance
IEC 61000-4-2
Static discharge
(ESD)± 6 kV contact
± 8 kV air± 6 kV contact
± 8 kV airFloors should be wood, concrete, or...