Getnet Router GR-534W User Manual

							 
86 
 
 
Note: 
In the WDS mode, do not set any mixed modes, for example, WPA-PSK/WPA2-PSK. 
Do not set all the WDS APs to be Lazy mode, please ensure that at least one WDS 
AP acts as Root Bridge, and enter the MAC addresses in the WDS table on the 
Basic Wireless Settings page. 
  Establishing a Network by WDS Bridge Mode 
The following description shows how to use the WDS bridge modes of two devices to 
establish a network. You may add more devices to establish a network. 
Suppose that there are two APs. One is AP1, the other is AP2. Enable the DHCP 
server of AP1 and AP2.  
						

							 
87 
 
 
The following table shows the settings of AP1 and AP2. 
 
 
- Set AP1 
Step1 Enter http://192.168.1.1 in the IE address bar, and then enter the user 
name (by default, admin) and the password (by default, admin) to log in 
to the Web page. 
Step2 On the
 Basic Wireless Settings page, set the WDS mode to be Bridge 
Mode, and enter the MAC address of the AP2.
  
						

							 
88 
  
 
Step3 Set the SSID of AP1. AP1 and AP2 must use the same SSID and channel. 
  
  
						

							 
89 
Step4 On the Wireless Security /Encryption Settings page, disable the 
security mode. 
   
 
Step5 Click Internet > LAN to display the Local Area Network (LAN) Settings 
page. Set the IP address of AP1 to be 192.168.1.1. 
  
 
Step6 Click Administration > Statistics to display the Statistic page. On this 
page, you can view the information of WDS AP, such as the MAC address, 
and the number of transmitted frames. 
- Set AP2  
						

							 
90 
Step1 Click Internet > LAN to display the Local Area Network (LAN) Settings 
page. Set the IP address of AP2 to be 192.168.1.2. 
  
 
Step2 On the Basic Wireless Settings page, set the WDS mode to be Bridge 
Mode and enter the MAC address of the AP1. 
 
 
5.5    Wireless Settings (WISP Mode) 
In the WISP mode, the following figure shows the navigation menu of the Wireless 
settings: 
 
In the WISP mode, the sub-menus of the Wireless Settings include Profile, Link 
Status, Site Survey, Statistics, Advance, QoS, 11n Configuration, WPS and  
						

							 
91 
About. 
5.5.1  Profile 
Click Wireless > Profile to display the Station Profile page. 
 
 
On this page, you can add a new profile, delete, edit, and active a preset profile in the 
profile list. 
  Add a Profile 
Click the Add button on the Station Profile page, and the System Configuration 
page appears.  
						

							 
92 
 
 
- System Configuration 
The parameters of System Configuration page are described as follows: 
Field Description 
Profile Name  Set a profile name. 
SSID  Enter the SSID of AP that you want to connect. 
Network Type   Infrastructure: An application mode for 
integrating the cable LAN and the wireless  
						

							 
93 
Field Description 
LAN structures. The devices need an AP to 
communicate each other. 
   802.11 Ad Hoc :A point to point connection 
mode without AP. 
Power Saving Mode   CAM (Constantly Awake Mode) is not a 
power saving mode. CAM is the default 
setting. 
  Power Saving Mode: For saving power. 
Channel When selecting the network type to be 802.11 Ad 
hoc, you may select a proper channel in the drop 
down list. 
11B Preamble Type  When selecting the network type to be 802.11 Ad 
hoc, you are allowed to set the 11B preamble 
type. You may select Auto or Long. 
RTS Threshold  Whether to set the RTS Threshold. The default 
value is 2347. 
Fragment Threshold  Whether to set the fragment threshold. The 
default value is 2346. 
 
- Security Policy (OPEN and SHARED Mode) 
When selecting the security mode to be OPEN or SHARED, the WEP table appears 
on the System Configuration page.  
						

							 
94 
 
 
The parameters of WEP (Wire Equivalence Protection) are described as follows: 
Field Description 
WEP Key Length  When selecting 64 bit (10 hex digits/5 ascii keys), 
it allows you to set 10-hex-digit or 
5-ASCII-character key. 
When selecting 128 bit (26 hex digits/13 ascii 
keys), it allows you to set 26-hex-digit or 13 - 
ASCII-character key. 
WEP Key Entry 
Method You may select Hexadecimal or ASCII text. 
WEP Keys (WEP 
key 1~4) For setting WEP keys. 
Default Key  Set a default key. 
 
- Security Policy (WPA-Personal or WPA2-Personal Mode) 
When selecting the security mode to be WPA-Personal or WPA2-Personal, the 
WPA table appears on the System Configuration page.  
						

							 
95 
 
 
The parameters of WPA are described as follows: 
Field Description 
WPA Algorithms  You may  select TKIP or AES. 
Pass Phrase  Set the encryption key. 
 
  Delete a Profile 
If you want to delete a preset profile (e.g. PR0F001), choose this profile and then click 
the Delete button. See the following figure: 
 
 
  Edit a Profile 
If you want to delete a preset profile (e.g. PR0F001), choose this profile and then click 
the Edit button. See the following figure: