Getnet Router GR-724W User Manual

14 
 
 
 
 
2-2-3Windows XP IP address setup: 
 
1. Click ‘Start’ button (it should be located at lower-left corner of your 
computer), then click control panel. Double-click Network and Internet 
Connections icon, click Network Connections, then double-click Local 
Area Connection, Local Area Connection Status window will appear, 
and then click ‘Properties’ 
  

15 
 
 
2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server 
address automatically’, then click ‘OK’.  

16 
 
 
 
2-2-4Windows Vista IP address setup: 
 
1. Click ‘Start’ button (it should be located at lower-left corner of your 
computer), then click control panel. Click View Network Status and 
Ta s k s, and then click Manage Network Connections. Right-click Local 
Area Network, then select ‘Properties’. Local Area Connection 
Properties window will appear, select ‘Internet Protocol Version 4 (TCP / 
IPv4), and then click ‘Properties’ 
  

17 
 
 
2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server 
address automatically’, then click ‘OK’. 
  

18 
  

19 
2-2-5 Router IP address lookup   
 
After the IP address setup is complete, please click ‘start’ -> ‘run’ at the 
bottom-lower corner of your desktop: 
 
 
 
Input ‘cmd’, then click ‘OK’ 
 
  

20 
Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address 
followed by ‘Default Gateway’ (In this example, the IP address of router 
is 192.168.1.1, please note that this value may be different.) 
 
 
 
 
 
 
 
3. Connect the router’s management interface by web browser 
 
After your computer obtained an IP address from router, please start your 
web browser, and input the IP address of router in address bar. The 
following message should be shown: 
 
NOTE: If the IP address of Gateway is...

21 
Please input user name and password in the field respectively, default 
user name is ‘admin’, and default password is ‘admin’, then press ‘OK’ 
button, and you can see the web management interface of this router: 
 
 
 
 
 
 
 
 
 
 
 
 
NOTE: If you can’t see the web management interface, and you’re 
being prompted to input user name and password again, it means you 
didn’t input username and password correctly. Please retype user 
name and password again. If you’re certain about the user name and...

22 
2-3 Using ‘Quick Setup’ 
 
This router provides a ‘Quick Setup’ procedure, which will help you to 
complete all required settings you need to access the Internet in very short 
time. Please follow the following instructions to complete the ‘Quick 
Setup’: 
 
Please go to QuickSetup menu by clicking ‘QuickSetup’ button. 
 
 
 
 
 
And the following message will be displayed: 
 
1. Set Time Zone 
 
 
 
Here are descriptions of every setup items: 
 
Set Time        Please press 
  button, a drop-down...

23 
 
After you finish with all settings, please click ‘Apply’ (4) button.   
 
 
 
 
 
 
 
 
 
2. Broadband Type 
 
 
Please choose the broadband (Internet connection) type you’re using in 
this page. There are six types of Internet connection, they are: 
 
Dynamic IP        - Please go to section 2-3-1 
Fixed-IP xDSL      - Please go to section 2-3-2 
PPPoE          - Please go to section 2-3-3 
PPTP          - Please go to section 2-3-4 
L2TP          - Please go to section 2-3-5 
Telstra Big Pond...