Getnet Router GR-724W User Manual

34 
 
 
 
 
 
2-4-2 Change management password 
 
Default password of this router is admin, and it’s displayed on the login 
prompt when accessed from web browser. There’s a security risk if you 
don’t change the default password, since everyone can see it. This is very 
important when you have wireless function enabled. 
 
To change password, please follow the following instructions: 
 
Please click ‘System’ menu on the left of web management interface, then 
click ‘Password Settings’, and the following...

35 
 
 
 
Please retype the new password again when you see above message. 
 
If you see the following message: 
 
 
 
It means the content in ‘Current Password’ field is wrong, please click 
‘OK’ to go back to previous menu, and try to input current password 
again.  
 
If the current and new passwords are correctly entered, after you click 
‘Apply’, you’ll be prompted to input your new password: 
 
 
Please use new password to enter web management interface again, and  

36 
you should be able to login with new password. 
 
 
2-4-3 Remote Management 
 
This router does not allow management access from Internet, to prevent 
possible security risks (especially when you defined a weak password, or 
didn’t change default password). However, you can still management this 
router from a specific IP address by enabling the ‘Remote Management’ 
Function. 
 
To do so, please follow the following instructions: 
 
Please click ‘System’ menu on the left of web management interface,...

37 
When you finish with all settings, click ‘Apply’, and you’ll see the 
following message displayed on web browser: 
 
 
 
Press ‘Continue’ to save the settings made and back to web management 
interface; press ‘Apply’ to save the settings made and restart the router so 
the settings will take effect after it reboots. 
  

38 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 NOTE: When you want to manage this router from another computer 
on internet, you have to input the IP address and port number of this 
router. If your Internet service provider assigns you with a static IP 
address, it will not be a problem; but if the IP address your service 
provider assigns to you will vary every time you establish an internet 
connection, this will be a problem.   
 
Please either ask your service provider to give you...

39 
2-5 Setup Internet Connection (WAN Setup) 
 
Internet connections setup can be done by using ‘Quick Setup’ menu 
described in chapter 2-3. However, you can setup WAN connections up 
by using WAN configuration menu. You can also set advanced functions 
like DDNS (Dynamic DNS) here. 
 
To start configuration, please follow the following instructions: 
 
Please click ‘WAN’ menu on the left of web management interface, and 
the following message will be displayed on your web browser: 
 
Please select an...

40 
2-5-1 Setup procedure for ‘Dynamic IP’: 
 
 
 
Here are descriptions of every setup items: 
 
Host Name (1):    Please input host name of your computer, this is 
optional, and only required if your service provider 
asks you to do so.   
 
MAC Address (2):    Please input MAC address of your computer, if your 
service provider only permits computer with certain 
MAC address to access internet. If you’re using the 
computer which used to connect to Internet via 
cable modem, you can simply press...

41 
 
 
Please click ‘Continue’ (1) to back to previous setup menu; to continue on 
router setup, or click ‘Apply’ to reboot the router so the settings will take 
effect (Please wait for about 30 seconds while router is rebooting). 
 
 
2-5-2 Setup procedure for ‘Static IP’: 
 
 
 
Here are descriptions of every setup items: 
 
IP address assigned    Please input IP address assigned 
by your Service       by your service provider. 
Provider (1):   
 
Subnet Mask (2):    Please input subnet mask assigned...

42 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-3 Setup procedure for ‘PPPoE’: 
 
 
 
Here are descriptions of every setup items: 
 
User Name (1):    Please input user name assigned by your...

43 
Password (2):    Please input the password assigned by your Internet 
service provider here. 
Service Name (3):    Please give a name to this Internet service, this is 
optional 
 
MTU (4):    Please input the MTU value of your network 
connection here. If you don’t know, you can use 
default value. 
 
Connection       Please select the connection type of Internet 
Type (5):    connection you wish to use. 
Continuous – The connection will be kept always on. If 
the connection is interrupted, the...