Home
>
Global Garden Products
>
Lawn Mower
>
Global Garden Products Lawn Mower 102 - 122 102 - 122 Hydro Instructions Manual
Global Garden Products Lawn Mower 102 - 122 102 - 122 Hydro Instructions Manual
Here you can view all the pages of manual Global Garden Products Lawn Mower 102 - 122 102 - 122 Hydro Instructions Manual. The Global Garden Products manuals for Lawn Mower are available online for free. You can easily download all the documents as PDF.
Page 51
TC• TX © by GLOBAL GARDEN PRODUCTS 102 - 122 7.1.2- GUIDE TO THE IDENTIFICATION OF PROBLEMS IN THE ELECTRICAL SYSTEM 1 / 3 WORKSHOP MANUAL page from 2006to •••• 3/2006 7.1 GUIDE TO THE IDENTIFICATION OF PROBLEMS IN THE ELECTRICAL SYSTEM In the following some of the problems connected to the malfunctioning of the electri- cal system are shown, with their probable cause and the remedial action to be taken. Should the problem continue after the appropriate checks, seek assistance from your local...
Page 52
![Page 52
TC•
TX
© by GLOBAL GARDEN PRODUCTS
102 - 122
7.1.2- GUIDE TO THE IDENTIFICATION OF
PROBLEMS IN THE ELECTRICAL SYSTEM
2 / 3
WORKSHOP MANUAL
page from
2006to ••••
3/2006
PROBLEM CAUSE REMEDY
Starting not permitted [see summary
logic table 7.2]After checking that the conditions are met,
check all the microswitches [see 7.3] and the
relative wiring.
4. The starter turns but the
engine does not startNo fuel flowCheck the leads for the carburettor solenoid
valve opening control (if provided) or...](http://img.usermanuals.tech/thumb/5593/82553/w300_Wsm102_EN_2006_d-51.png "Page 52
TC•
TX
© by GLOBAL GARDEN PRODUCTS
102 - 122
7.1.2- GUIDE TO THE IDENTIFICATION OF
PROBLEMS IN THE ELECTRICAL SYSTEM
2 / 3
WORKSHOP MANUAL
page from
2006to ••••
3/2006
PROBLEM CAUSE REMEDY
Starting not permitted [see summary
logic table 7.2]After checking that the conditions are met,
check all the microswitches [see 7.3] and the
relative wiring.
4. The starter turns but the
engine does not startNo fuel flowCheck the leads for the carburettor solenoid
valve opening control (if provided) or...")
TC• TX © by GLOBAL GARDEN PRODUCTS 102 - 122 7.1.2- GUIDE TO THE IDENTIFICATION OF PROBLEMS IN THE ELECTRICAL SYSTEM 2 / 3 WORKSHOP MANUAL page from 2006to •••• 3/2006 PROBLEM CAUSE REMEDY Starting not permitted [see summary logic table 7.2]After checking that the conditions are met, check all the microswitches [see 7.3] and the relative wiring. 4. The starter turns but the engine does not startNo fuel flowCheck the leads for the carburettor solenoid valve opening control (if provided) or...
Page 53
![Page 53
TC•
TX
© by GLOBAL GARDEN PRODUCTS
102 - 122
7.1.2- GUIDE TO THE IDENTIFICATION OF
PROBLEMS IN THE ELECTRICAL SYSTEM
3 / 3
WORKSHOP MANUAL
page from
2006to ••••
3/2006
PROBLEM CAUSE REMEDY
10. The engine stops while in
use for reasons not due
to the safety devices cut-
ting inThe safety devices have cut in or are
faultyCheck the operation of the microswitch opera-
tion and the relevant wiring [see 7.3 and 7,8]
Accidental detaching of an electrical
wireCheck all wiring
Starting of engine not...](http://img.usermanuals.tech/thumb/5593/82553/w300_Wsm102_EN_2006_d-52.png "Page 53
TC•
TX
© by GLOBAL GARDEN PRODUCTS
102 - 122
7.1.2- GUIDE TO THE IDENTIFICATION OF
PROBLEMS IN THE ELECTRICAL SYSTEM
3 / 3
WORKSHOP MANUAL
page from
2006to ••••
3/2006
PROBLEM CAUSE REMEDY
10. The engine stops while in
use for reasons not due
to the safety devices cut-
ting inThe safety devices have cut in or are
faultyCheck the operation of the microswitch opera-
tion and the relevant wiring [see 7.3 and 7,8]
Accidental detaching of an electrical
wireCheck all wiring
Starting of engine not...")
TC• TX © by GLOBAL GARDEN PRODUCTS 102 - 122 7.1.2- GUIDE TO THE IDENTIFICATION OF PROBLEMS IN THE ELECTRICAL SYSTEM 3 / 3 WORKSHOP MANUAL page from 2006to •••• 3/2006 PROBLEM CAUSE REMEDY 10. The engine stops while in use for reasons not due to the safety devices cut- ting inThe safety devices have cut in or are faultyCheck the operation of the microswitch opera- tion and the relevant wiring [see 7.3 and 7,8] Accidental detaching of an electrical wireCheck all wiring Starting of engine not...
Page 54
102 - 122 7.1a.0- GUIDE TO THE IDENTIFICATION OF PROBLEMS IN THE ELECTRICAL SYSTEM 1 / 3 WORKSHOP MANUAL page from 2006to •••• 3/2006© by GLOBAL GARDEN PRODUCTS TC• TX 7.1a GUIDE TO THE IDENTIFICATION OF PROBLEMS IN THE ELECTRICAL SYSTEM In the following some of the problems connected to the malfunctioning of the electri- cal system are shown, with their probable cause and the remedial action to be taken. Should the problem continue after the appropriate checks, seek assistance from your local...
Page 55
![Page 55
102 - 122
7.1a.0- GUIDE TO THE IDENTIFICATION OF
PROBLEMS IN THE ELECTRICAL SYSTEM
2 / 3
WORKSHOP MANUAL
page from
2006to ••••
3/2006© by GLOBAL GARDEN PRODUCTS
TC•
TX
PROBLEM CAUSE REMEDY
Starting not permitted [see summary
logic table 7.2]After checking that the conditions are met,
check all the microswitches [see 7.3] and the
relative wiring.
4. The starter turns but the
engine does not startNo fuel flowCheck the leads for the carburettor solenoid
valve opening control (if provided) or...](http://img.usermanuals.tech/thumb/5593/82553/w300_Wsm102_EN_2006_d-54.png "Page 55
102 - 122
7.1a.0- GUIDE TO THE IDENTIFICATION OF
PROBLEMS IN THE ELECTRICAL SYSTEM
2 / 3
WORKSHOP MANUAL
page from
2006to ••••
3/2006© by GLOBAL GARDEN PRODUCTS
TC•
TX
PROBLEM CAUSE REMEDY
Starting not permitted [see summary
logic table 7.2]After checking that the conditions are met,
check all the microswitches [see 7.3] and the
relative wiring.
4. The starter turns but the
engine does not startNo fuel flowCheck the leads for the carburettor solenoid
valve opening control (if provided) or...")
102 - 122 7.1a.0- GUIDE TO THE IDENTIFICATION OF PROBLEMS IN THE ELECTRICAL SYSTEM 2 / 3 WORKSHOP MANUAL page from 2006to •••• 3/2006© by GLOBAL GARDEN PRODUCTS TC• TX PROBLEM CAUSE REMEDY Starting not permitted [see summary logic table 7.2]After checking that the conditions are met, check all the microswitches [see 7.3] and the relative wiring. 4. The starter turns but the engine does not startNo fuel flowCheck the leads for the carburettor solenoid valve opening control (if provided) or...
Page 56
![Page 56
102 - 122
7.1a.0- GUIDE TO THE IDENTIFICATION OF
PROBLEMS IN THE ELECTRICAL SYSTEM
3 / 3
WORKSHOP MANUAL
page from
2006to ••••
3/2006© by GLOBAL GARDEN PRODUCTS
TC•
TX
PROBLEM CAUSE REMEDY
11. The engine stops while in
use for reasons not due
to the safety devices cut-
ting inThe safety devices have cut in or are
faultyCheck the operation of the microswitch opera-
tion and the relevant wiring [see 7.3 and 7,8]
Accidental detaching of an electrical
wireCheck all wiring
Starting of engine not...](http://img.usermanuals.tech/thumb/5593/82553/w300_Wsm102_EN_2006_d-55.png "Page 56
102 - 122
7.1a.0- GUIDE TO THE IDENTIFICATION OF
PROBLEMS IN THE ELECTRICAL SYSTEM
3 / 3
WORKSHOP MANUAL
page from
2006to ••••
3/2006© by GLOBAL GARDEN PRODUCTS
TC•
TX
PROBLEM CAUSE REMEDY
11. The engine stops while in
use for reasons not due
to the safety devices cut-
ting inThe safety devices have cut in or are
faultyCheck the operation of the microswitch opera-
tion and the relevant wiring [see 7.3 and 7,8]
Accidental detaching of an electrical
wireCheck all wiring
Starting of engine not...")
102 - 122 7.1a.0- GUIDE TO THE IDENTIFICATION OF PROBLEMS IN THE ELECTRICAL SYSTEM 3 / 3 WORKSHOP MANUAL page from 2006to •••• 3/2006© by GLOBAL GARDEN PRODUCTS TC• TX PROBLEM CAUSE REMEDY 11. The engine stops while in use for reasons not due to the safety devices cut- ting inThe safety devices have cut in or are faultyCheck the operation of the microswitch opera- tion and the relevant wiring [see 7.3 and 7,8] Accidental detaching of an electrical wireCheck all wiring Starting of engine not...
Page 57
TC• TX © by GLOBAL GARDEN PRODUCTS 102 - 122 7.2.1- SUMMARY TABLE FOR THE CUTTING IN OF THE SAFETY DEVICES 1 / 1 WORKSHOP MANUAL page from 2005to •••• 4/2005 7.2 SUMMARY TABLE FOR THE CUTTING IN OF THE SAFETY DEVICES This table shows the various situations in which the safety devices intervene. Note ●Pilot lamp on ❍Pilot lamp off ❇Pilot lamp uninfluential –/– = Uninfluential A) STARTING («START» position) OPERATOR GRASSCATCHER BLADES DRIVE PARKING ENGINE PILOT LAMPS –/– –/– –/–Engaged–/–...
Page 58
102 - 122 7.2a.0- SUMMARY TABLE FOR THE CUTTING IN OF THE SAFETY DEVICES 1 / 1 WORKSHOP MANUAL page from 2006to •••• 3/2006© by GLOBAL GARDEN PRODUCTS TC• TX 7.2a SUMMARY TABLE FOR THE CUTTING IN OF THE SAFETY DEVICES This table shows the various situations in which the safety devices intervene. Note ●Pilot lamp on ❍Pilot lamp off ❇Pilot lamp uninfluential –/– = Uninfluential A) STARTING («START» position) OPERATOR GRASSCATCHER BLADES DRIVE PARKING ENGINE PILOT LAMPS –/– –/–...
Page 59
TC• TX © by GLOBAL GARDEN PRODUCTS 102 - 122 7.3.1- SAFETY MICROSWITCHES AND SWITCHES OPERATION CHECK 1 / 1 WORKSHOP MANUAL page from 2006to •••• 3/2006 CN4 18 17 16 15 14 1 2 3 4 5 131211109876 CN3CN2CN1 1211131015 16 17 18 1422 CN4 18 17 16 15 14 1 2 3 4 5 131211109876 CN3CN2CN1 1 8796121113105 1 432 15 16 17 18 14 111 7.3 SAFETY MICROSWITCHES AND SWITCHES OPERATION CHECK This check is made by detaching all the connectors and by using the tester in the Ohm-meter function. This operation must...
Page 60
102 - 122 7.3a.0- SAFETY MICROSWITCHES AND SWITCHES OPERATION CHECK 1 / 1 WORKSHOP MANUAL page from 2006to •••• 7.3a SAFETY MICROSWITCHES AND SWITCH- ES OPERATION CHECK This check is done by disconnecting connector CN1 and using the tester in Ohmmeter mode. This operation must be performed without the operator aboard, making contact with the ferrules on the contacts of the wiring connector (1)and must give these results: No. of Contacts Tester reading and condition GRASS-CATCHER ATTACHED...