Home > Honeywell > Scanner > Honeywell 1250g2 Manual

Honeywell 1250g2 Manual

Add to Favourites

Download as PDF Print this page Share this page

Have a look at the manual Honeywell 1250g2 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 178 Honeywell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

Page 176 9 - 2
Storage A single character that specifies the storage table to which the
command is applied. An exclamation point (!) performs the command’s
operation on the device’s volatile menu configuration table. A period (.)
performs the command’s operation on the device’s non-volatile menu
configuration table. Use the non-volatile table only for semi-permanent
changes you want saved through a power cycle.
Query Commands
Several special characters can be used to query the device about its settings....

Page 177 9 - 3
Responses
The device responds to serial commands with one of three responses:
ACKIndicates a good command which has been processed.
ENQIndicates an invalid Tag or SubTag command.
NAKIndicates the command was good, but the Data field entry was out of
the allowable range for this Tag and SubTag combination, e.g., an
entry for a minimum message length of 100 when the field will only
accept 2 characters.
When responding, the device echoes back the command sequence with
the status character...

Page 178 9 - 4
MAX60[ACK],
DFT[ACK].
This response indicates that the device’s Codabar Coding Enable (CBRENA) is
set to 1, or on;
the Start/Stop Character (SSX) is set to 0, or Don’t Transmit;
the Check Character (CK2) is set to 0, or Not Required;
concatenation (CCT) is set to 1, or Enabled;
the Minimum Message Length (MIN) is set to 2 characters;
the Maximum Message Length (MAX) is set to 60 characters;
and the Default setting (DFT) has no value.
Serial Trigger Commands
You can activate and deactivate...

Page 179 9 - 5
The charts on the following pages list the factory default settings for each of the
commands (indicated by an asterisk (*) on the programming pages).

Page 180 9 - 6
Menu Commands
SelectionSetting* Indicates default
Serial Command
# Indicates a numeric
entryPage
Product Default Settings
Setting Custom
DefaultsSet Custom Defaults MNUCDF1-6
Save Custom
DefaultsDEFALT1-6
Resetting the
Custom DefaultsActivate Custom
DefaultsDEFALT1-6
Programming the Interface
Plug and Play Codes Keyboard Wedge:
IBM PC AT and
Compatibles with
CR suffixPA P _ AT2-1
IBM PS2 Keyboard PAPPS22-1
RS232 Serial Port PAP2322-2
Plug and Play Codes:
RS485IBM Port 5B
InterfacePA P P 5...

Page 181 9 - 7
Plug and Play Codes:
USBUSB Keyboard (PC) PAP1242-5
USB Keyboard
(Mac)PAP1252-5
USB Japanese
Keyboard (PC)PAP1342-5
USB HID PAP1312-5
HID Fallback Mode HID Fallback Mode
(Range 0-60 *5
minutesUSBFTO2-6 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric
entryPage

Page 182 9 - 8
USB Serial
CommandsUSB Serial
Emulation for
Windows XP,
Windows Server
2003, and laterPAP1302-6
USB Serial
Emulation for
Windows 2000REMIFCO;PAP1302-6
CTS/RTS Emulation
OnUSBCTS12-6
CTS/RTS Emulation
Off*USBCTS02-6
ACK/NAK Mode On USBACK12-7
ACK/NAK Mode Off* USBACK02-7
Communication
Timeout
(Range 0-65535)
*2000 ms232DLK#####2-7
Timeout Retries HSTRTY2-7
Communication
Timeout Beeper -
OffHSTTOA02-8
*Communication
Timeout Beeper -
OnHSTTOA12-8
NAK Retries
(Range 0-255)...

Page 183 9 - 9
Plug and Play Codes Verifone Ruby
TerminalPA P R B Y2-9
Gilbarco Terminal PAPGLB2-9
Honeywell Bioptic
Aux Por tPA P B I O2-10
Datalogic Magellan
Bioptic Aux PortPA P M A G2-10
NCR Bioptic Aux
Po r tPA P N C R2-11
Wincor Nixdorf
TerminalPA P W N X2-11
Wincor Nixdorf
BeetlePA P B T L2-12
Wincor Nixdorf
RS232 Mode APA P W M A2-13
Program Keyboard
Country*U.S.A. KBDCTY02-14
Albania KBDCTY352-14
Arabic KBDCTY912-14
Azeri (Cyrillic) KBDCTY812-14
Azeri (Latin) KBDCTY802-14
Belarus KBDCTY822-14...

Page 184 9 - 10
Croatia KBDCTY322-15
Czech KBDCTY152-15
Czech
(Programmers)KBDCTY402-15
Czech (QWERTY) KBDCTY392-15
Czech (QWERTZ) KBDCTY382-15
Denmark KBDCTY82-15
Dutch (Netherlands) KBDCTY112-15
Estonia KBDCTY412-15
Faeroese KBDCTY832-15
Finland KBDCTY22-16
Fr an ce K BD CTY 32-16
Gaelic KBDCTY842-16
Germany KBDCTY42-16
Greek KBDCTY172-16
Greek (220 Latin) KBDCTY642-16
Greek (220) KBDCTY612-16
Greek (319 Latin) KBDCTY652-16
Greek (319) KBDCTY622-16
Greek (Latin) KBDCTY632-16
Greek (MS) KBDCTY662-16
Greek...

Page 185 9 - 11
Kyrgyz (Cyrillic) KBDCTY792-17
Latin America KBDCTY142-17
Latvia KBDCTY422-17
Latvia (QWERTY) KBDCTY432-17
Lithuania KBDCTY442-17
Lithuania (IBM) KBDCTY452-17
Macedonia KBDCTY342-18
Malta KBDCTY742-18
Mongolian (Cyrillic) KBDCTY862-18
Norway KBDCTY92-18
Poland KBDCTY202-18
Polish (214) KBDCTY572-18
Po l is h
(Programmers)KBDCTY582-18
Portugal KBDCTY132-18
Romania KBDCTY252-18
Russia KBDCTY262-18
Russian (MS) KBDCTY672-18
Russian (Typewriter) KBDCTY682-18
SCS KBDCTY212-18
Serbia (Cyrillic)...

Page 186 9 - 12
Ta t a r K B D C T Y 8 52-19
Thailand KBDCTY942-19
Tu r k e y F K B D C T Y 2 72-20
Tu r k e y Q K B D C T Y 2 42-20
Ukrainian KBDCTY762-20
United Kingdom KBDCTY72-20
United Stated
(Dvorak right)KBDCTY892-20
United States
(Dvorak left)KBDCTY882-20
United States
(Dvorak)KBDCTY872-20
United States
(International)KBDCTY302-20
Uzbek (Cyrillic) KBDCTY772-20
Vietnam KBDCTY952-20
Keyboard Wedge Modifiers
ALT Mode *Off KBDALT02-21
3 Characters KBDALT62-21
4 Characters KBDALT72-21
Keyboard Style...

View all the pages

Add page 181 to Favourites

							9 - 7
Plug and Play Codes: 
USBUSB Keyboard (PC) PAP1242-5
USB Keyboard 
(Mac)PAP1252-5
USB Japanese 
Keyboard (PC)PAP1342-5
USB HID PAP1312-5
HID Fallback Mode HID Fallback Mode 
(Range 0-60  *5 
minutesUSBFTO2-6 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric 
entryPage

Add page 182 to Favourites

							9 - 8
USB Serial 
CommandsUSB Serial 
Emulation for 
Windows XP, 
Windows Server 
2003, and laterPAP1302-6
USB Serial 
Emulation for 
Windows 2000REMIFCO;PAP1302-6
CTS/RTS Emulation 
OnUSBCTS12-6
CTS/RTS Emulation 
Off*USBCTS02-6
ACK/NAK Mode On USBACK12-7
ACK/NAK Mode Off* USBACK02-7
Communication 
Timeout
(Range 0-65535) 
*2000 ms232DLK#####2-7
Timeout Retries HSTRTY2-7
Communication 
Timeout Beeper - 
OffHSTTOA02-8
*Communication 
Timeout Beeper - 
OnHSTTOA12-8
NAK Retries
(Range 0-255) *0HSTRTN###2-8
BEL/CAN Mode On BELCAN12-8
BEL/CAN Mode Off* BELCAN02-8 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric 
entryPage

Add page 183 to Favourites

							9 - 9
Plug and Play Codes Verifone Ruby 
TerminalPA P R B Y2-9
Gilbarco Terminal PAPGLB2-9
Honeywell Bioptic 
Aux Por tPA P B I O2-10
Datalogic Magellan 
Bioptic Aux PortPA P M A G2-10
NCR Bioptic Aux 
Po r tPA P N C R2-11
Wincor Nixdorf 
TerminalPA P W N X2-11
Wincor Nixdorf 
BeetlePA P B T L2-12
Wincor Nixdorf 
RS232 Mode APA P W M A2-13
Program Keyboard 
Country*U.S.A. KBDCTY02-14
Albania KBDCTY352-14
Arabic KBDCTY912-14
Azeri (Cyrillic) KBDCTY812-14
Azeri (Latin) KBDCTY802-14
Belarus KBDCTY822-14
Belgium KBDCTY12-14
Bosnia KBDCTY332-14
Brazil KBDCTY162-14
Brazil (MS) KBDCTY592-14
Bulgaria (Cyrillic) KBDCTY522-14
Bulgaria (Latin) KBDCTY532-14
Canada (French 
legacy)KBDCTY542-15
Canada (French) KBDCTY182-15
Canada 
(Multilingual)KBDCTY552-15
China KBDCTY922-15 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric 
entryPage

Add page 184 to Favourites

							9 - 10
Croatia KBDCTY322-15
Czech KBDCTY152-15
Czech 
(Programmers)KBDCTY402-15
Czech (QWERTY) KBDCTY392-15
Czech (QWERTZ) KBDCTY382-15
Denmark KBDCTY82-15
Dutch (Netherlands) KBDCTY112-15
Estonia KBDCTY412-15
Faeroese KBDCTY832-15
Finland KBDCTY22-16
Fr an ce K BD CTY 32-16
Gaelic KBDCTY842-16
Germany KBDCTY42-16
Greek KBDCTY172-16
Greek (220 Latin) KBDCTY642-16
Greek (220) KBDCTY612-16
Greek (319 Latin) KBDCTY652-16
Greek (319) KBDCTY622-16
Greek (Latin) KBDCTY632-16
Greek (MS) KBDCTY662-16
Greek (Polytonic) KBDCTY602-16
Hebrew KBDCTY122-16
Hungarian (101 key) KBDCTY502-16
Hungary KBDCTY192-17
Iceland KBDCTY752-17
Ireland KBDCTY732-17
Italian (142) KBDCTY562-17
Italy KBDCTY52-17
Japan ASCII KBDCTY282-17
Kazakh KBDCTY782-17
Korea KBD CTY932-17 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric 
entryPage

Add page 185 to Favourites

							9 - 11
Kyrgyz (Cyrillic) KBDCTY792-17
Latin America KBDCTY142-17
Latvia KBDCTY422-17
Latvia (QWERTY) KBDCTY432-17
Lithuania KBDCTY442-17
Lithuania (IBM) KBDCTY452-17
Macedonia KBDCTY342-18
Malta KBDCTY742-18
Mongolian (Cyrillic) KBDCTY862-18
Norway KBDCTY92-18
Poland KBDCTY202-18
Polish (214) KBDCTY572-18
Po l is h 
(Programmers)KBDCTY582-18
Portugal KBDCTY132-18
Romania KBDCTY252-18
Russia KBDCTY262-18
Russian (MS) KBDCTY672-18
Russian (Typewriter) KBDCTY682-18
SCS KBDCTY212-18
Serbia (Cyrillic) KBDCTY372-19
Serbia (Latin) KBDCTY362-19
Slovakia KBDCTY222-19
Slovakia (QWERTY) KBDCTY492-19
Slovakia (QWERTZ) KBDCTY482-19
Slovenia KBDCTY312-19
Spain KBDCTY102-19
Spanish variation KBDCTY512-19
Sweden KBDCTY232-19
Switzerland (French) KBDCTY292-19
Switzerland 
(German)KBDCTY62-19 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric 
entryPage

Add page 186 to Favourites

							9 - 12
Ta t a r K B D C T Y 8 52-19
Thailand KBDCTY942-19
Tu r k e y  F K B D C T Y 2 72-20
Tu r k e y  Q K B D C T Y 2 42-20
Ukrainian KBDCTY762-20
United Kingdom KBDCTY72-20
United Stated 
(Dvorak right)KBDCTY892-20
United States 
(Dvorak left)KBDCTY882-20
United States 
(Dvorak)KBDCTY872-20
United States 
(International)KBDCTY302-20
Uzbek (Cyrillic) KBDCTY772-20
Vietnam KBDCTY952-20
Keyboard Wedge Modifiers
ALT Mode *Off KBDALT02-21
3 Characters KBDALT62-21
4 Characters KBDALT72-21
Keyboard Style *Regular KBDSTY02-21
Caps Lock KBDSTY12-21
Shift Lock KBDSTY22-21
Autocaps via 
NumLockKBDSTY72-22
Emulate External
KeyboardKBDSTY52-22 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric 
entryPage

Add page 187 to Favourites

							9 - 13
Keyboard Conversion *Keyboard 
Conversion OffKBDCNV02-22
Convert all 
Characters to Upper 
CaseKBDCNV12-22
Convert all 
Characters to Lower 
CaseKBDCNV12-22
Keyboard Modifiers *Control + ASCII Off KBDCAS02-23
DOS Mode Control 
+ ASCIIKBDCAS12-23
Windows Mode 
Control + ASCIIKBDCAS22-23
Windows Mode 
Prefix/Suffix OffKBDCAS32-23
*Numeric Keypad 
OffKBDNPS02-23
Numeric Keypad On KBDNPS12-23
Inter-Scan Code 
DelayInter-Scan Code 
Delay
*0 (Range 1-30 
msecs)KBDDLY##2-24
 Break 
CharacterSuppress  
Break CharacterKBDF0B02-24
*Transmit  
Break CharacterKBDF0B12-24
Keyboard Wedge 
DefaultsReset Keyboard 
Wedge DefaultsKBDDFT2-24 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric 
entryPage

Add page 188 to Favourites

							9 - 14
RS-232 Modifiers
RS232 Baud Rate 300 BPS 232BAD02-25
600 BPS 232BAD12-25
1200 BPS 232BAD22-25
2400 BPS 232BAD32-25
4800 BPS 232BAD42-25
*9600 BPS 232BAD52-25
19200 BPS 232BAD62-25
38400 BPS 232BAD72-25
57600 BPS 232BAD82-25
115200 BPS 232BAD92-25 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric 
entryPage

Add page 189 to Favourites

							9 - 15
Word Length:  Data 
Bits, Stop Bits, and 
Pa r i t y7 Data, 1 Stop, 
Par ity Even232WRD32-26
7 Data, 1 Stop, 
Par ity N one232WRD02-26
7 Data, 1 Stop, 
Par ity Odd232WRD62-26
7 Data, 2 Stop, 
Par ity Even232WRD42-26
7 Data, 2 Stop, 
Par ity N one232WRD12-26
7 Data, 2 Stop, 
Par ity Odd232WRD72-26
8 Data, 1 Stop, 
Par ity Even232WRD52-26
*8 Data, 1 Stop, 
Par ity N one232WRD22-26
8 Data, 1 Stop, 
Par ity Odd232WRD82-26
7 Data, 1 Stop, 
Parity Space232WRD92-26
7 Data, 2 Stop, 
Parity Space232WRD102-27
8 Data, 1 Stop, 
Parity Space232WRD112-27
7 Data, 1 Stop, 
Par ity Mar k232WRD122-27
7 Data, 2 Stop, 
Par ity Mar k232WRD132-27
8 Data, 1 Stop, 
Par ity Mar k232WRD142-27 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric 
entryPage

Add page 190 to Favourites

							9 - 16
RS232 Handshaking *RTS/CTS Off 232CTS02-28
Flow Control, No 
Timeout232CTS12-28
Character-Based 
Flow Control, No 
Timeout232CTS72-28
Two-Direction Flow 
Control232CTS22-28
 Flow Control with 
Timeout232CTS32-28
Character-Based 
Flow Control with 
Timeout232CTS92-28
RS232 Timeout 
(Range 1-5100) 
*1000 ms232DEL####2-28
*XON/XOFF Off 232XON02-29
XON/XOFF On 232XON12-29
*ACK/NAK Off 232ACK02-29
ACK/NAK On 232ACK12-29
Communication 
Timeout
(Range 1-65535) 
*2000 ms232DLK#####2-29
Communication 
Timeout Beeper - 
OffHSTTOA02-30
*Communication 
Timeout Beeper - 
OnHSTTOA12-30
BEL/CAN Mode On BELCAN12-31
*BEL/CAN Mode Off BELCAN02-31
RS232 Defaults Reset RS232 
Defaults232DFT2-31
NCR Modifiers SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric 
entryPage

All Honeywell manuals Comments (0)