Honeywell 1300g2 Owners Manual

							6 - 35
EAN/JAN 8
EAN/JAN 8 Check Digit
This selection allows you to specify whether the check digit should be transmit-
ted at the end of the scanned data or not.  Default = On.
*  On
Off
Off
Off *  On 
						

							6 - 36
EAN/JAN 8 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN 8 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
EAN/JAN 8 Addenda Required
When Addenda Required is set to on, the scanner will only read EAN/JAN 8 bar 
codes that have addenda.  Default = Not Required.
* 5 Digit Addenda  5 Digit Addenda On* 2 Digit Addenda Off 2 Digit Addenda On
* 5 Digit Addenda Off
*  Not Required Required 
						

							6 - 37
EAN/JAN 8 Addenda Separator
When this feature is on, there is a space between the data from the bar code 
and the data from the addenda.  When turned off, there is no space.  
Default = On.
MSI

MSI
MSI Check Character
Different types of check characters are used with MSI bar codes.  You can 
program the scanner to read  MSI bar codes with Type 10 check characters.  
Default = Validate Type 10, but Don’t Transmit.
Off *  On
On
* Off 
						

							6 - 38
When Check Character is set to Validate and Transmit, the scanner will only 
read MSI bar codes printed with the specified type check character, and will 
transmit this character at the end of the scanned data.
When Check Character is set to Validate, but Don’t Transmit, the unit will only 
read MSI bar codes printed with the specified type check character, but will not 
transmit the check character with the scanned data.
MSI Message Length
Scan the bar codes below to change the message length.  Refer to Message 
Lengthon page 6-2 for additional information.  Minimum and Maximum
lengths = 4-48.   Minimum Default = 4, Maximum Default = 48.
Plessey Code

Validate Type 10 and Transmit *  Validate Type 10, but Don’t 
Transmit
Minimum Message Length
Maximum Message Length 
						

							6 - 39
Plessey Code
Plessey Message Length
Scan the bar codes below to change the message length.  Refer to Message 
Lengthon page 6-2 for additional information.  Minimum and Maximum
lengths = 4-48.   Minimum Default = 4, Maximum Default = 48.
GS1 DataBar Omnidirectional
< Default All GS1 DataBar Omnidirectional Settings >
On
* Off
Minimum Message Length
Maximum Message Length 
						

							6 - 40
GS1 DataBar Omnidirectional
GS1 DataBar Limited
< Default All GS1 DataBar Limited Settings >
GS1 DataBar Limited
GS1 DataBar Expanded
< Default All GS1 DataBar Expanded Settings >
* On
Off
* On
Off 
						

							6 - 41
GS1 DataBar Expanded
GS1 DataBar Expanded Message Length
Scan the bar codes below to change the message length.  Refer to Message 
Lengthon page 6-2 for additional information.  Minimum and Maximum
lengths = 4-74.   Minimum Default = 4, Maximum Default = 74.
China Post Code

* On
Off
Minimum Message Length
Maximum Message Length 
						

							6 - 42
China Post Code
China Post Message Length
Scan the bar codes below to change the message length.  Refer to Message 
Lengthon page 6-2 for additional information.  Minimum and Maximum
lengths = 2-80.   Minimum Default = 4, Maximum Default = 80.
On
* Off
Minimum Message Length
Maximum Message Length 
						

							6 - 43
Korea Post Code

Korea Post Code
Korea Post Message Length
Scan the bar codes below to change the message length.  Refer to Message 
Lengthon page 6-2 for additional information.  Minimum and Maximum
lengths = 2-80.   Minimum Default = 4, Maximum Default = 48.
On
* Off
Minimum Message Length
Maximum Message Length 
						

							6 - 44
Codablock F

Codablock F
Codablock F Message Length
Scan the bar codes below to change the message length.  Refer to Message 
Lengthon page 6-2 for additional information.  Minimum and Maximum
lengths = 1-2048.   Minimum Default = 1, Maximum Default = 2048.
On
* Off
Minimum Message Length
Maximum Message Length