Honeywell Galaxy 8 User Manual

Galaxy 8/18/60/128/500/504/512                           User Guide
5
UNSETTING THE SYSTEM
NORMAL ENTRY
Unsetting starts immediately when the FINAL door is opened or an
ENTRY zone is activated. The sounder pulses slowly and the user must
go directly to the keypad and enter a valid PIN, followed by  A>,  or < B. Press ent to
return to the banner. Certain types of alarms, once cancelled, require a
code with the appropriate reset authorisation to be entered. The system
prompts for a valid reset code by...

User Guide              Galaxy 8/18/60/128/500/504/512
6
MENU OPTIONS
There are two menu structures on the Galaxy control panels:
Full Menu
Only accessed by default by the Manager code on the Galaxy 60, 128, 500, 504 and 512 control
panels.
Quick Menu
A selection of options from the full menu. The quick menu is the default menu access for all
user codes (level three and above) as well as the Manager code on the Galaxy 8 and 18 control
panels.
Table 1. Menu Options
l e v e L r e s Uu n e M k c i u Qu n e...

Galaxy 8/18/60/128/500/504/512                           User Guide
7
ACCESSING THE MENU
To access the menu enter a valid code and press the ent key. The Full
Menu or Quick Menu is accessed, depending on the user level.
Note: 1.  If the user does not have group choice, all groups assigned
to the user code must be unset.
2.  If the user has group choice, at least one group on the
system must be unset.
3.  If there are no groups, then the system must be unset.
FULL MENU
The Full Menu has a hierarchy of...

User Guide              Galaxy 8/18/60/128/500/504/512
8
OMIT ZONES (User Level 3 and above)
PURPOSE
This option allows the user to omit zones before setting the system.
Zones must be eligible for omission otherwise they will not be displayed.
Note: Zones remain omitted for one set period only.
SELECTING OMIT ZONES
Enter the QUICK MENU. The 0=OMIT ZONES option is displayed.
Press the ent key to select this option.
VIEWING ELIGIBLE ZONES
When the OMIT ZONES option is selected the first zone eligible for...

Galaxy 8/18/60/128/500/504/512                           User Guide
9
ATM 1/2/3/4 ZONES (512 only)
ATM zones are omitted by entering one of the ten ATM codes (user
188 to user 197). To select this option enter an ATM code followed by
the ent key. Use the A> key to scroll through the four ATM zone
options (ATM1 to ATM4) and select by pressing the ent key. A
preprogrammed ATM delay time will expire before omitting all ATM
zones with the selected ATM zone type. The zones will be omitted for
the duration of...

User Guide              Galaxy 8/18/60/128/500/504/512
10
0 = OMIT ZONES
[ent] to Select
2 = CHIME
[ent] to SelectPIN + ent
> A
CHIME MODE
0 = OFF
2
ent
CHIME MODE
1=ON
ent
0 = OMIT ZONES
[ent] to Select
3 = DISPLAY ZONES
[ent] to SelectPIN + ent
1001 INTRUDER
COMPUTER ROOM
ent3
CHIME (User Level 3 and above)
PURPOSE
The CHIME mode is switched on and off by this option. When the
CHIME mode is on, any zones that have been programmed by the
engineer for chime will activate momentarily when opened....

Galaxy 8/18/60/128/500/504/512                           User Guide
11
STATUS
The current status of the zone is displayed as circuit information, e.g.
Open or Closed. This information alternates with function information.
DESCRIPTION
The zone description, if programmed, is displayed on the bottom line
of the display. The descriptor is assembled from alpha-numeric text
and describes the zone in detail, e.g. West Office Door.
SELECTING AND VIEWING
Selecting the DISPLAY ZONES option displays the first zone...

User Guide              Galaxy 8/18/60/128/500/504/512
12 PURPOSE
The PRINT option gives the user the opportunity to get a hard copy
print-out of the system details. This option requires a serial printer to
be connected to the system.
ADDITIONAL INFORMATION
The # key can be used to reveal additional information on some types
of events. This information is displayed on the bottom line. The
information includes details such as zone descriptors, user levels and
which keypad was used.
PRINTING
If a serial...

Galaxy 8/18/60/128/500/504/512                           User Guide
13
WALK TEST (User Level 5 and above)
PURPOSE
The WALK TEST option provides a method of testing the zones to
ensure that they are operating correctly. There are two options
available:
1.All zones can be tested
2.Selected zones can be tested
In both cases the sounder indicates an open zone. The test is recorded in
the log.
SELECTING WALK TEST
Enter the QUICK MENU. Press the key 6 followed by the ent key.
When WALK TEST is selected, TEST...

User Guide              Galaxy 8/18/60/128/500/504/512
14
The TIME/DATE option allows the user to modify both the time (hours/
minutes) and the date (day/month/year).
SELECTING TIME/DATE
Enter the QUICK MENU. Press key 7 followed by the ent key. Once
the TIME/DATE option has been selected, the time or date can be
selected by pressing the A> or  key. The display prompts for a NEW
TIME in hours and minutes (HH:MM). When the new time is entered,
the display immediately returns to the time or date selection...