Honeywell Galaxy 8 User Manual

Galaxy 8/18/60/128/500/504/512                           User Guide
15
CODES  (User Level 6)
PURPOSE
The CODES menu option enables the managers, (user level 6), to
allocate PINs and related information to users. The codes option is
divided into three sub–menus:
1. USER CODES
Sub divided into nine menus (depending on panel used and whether
the group and MAX Mode options are enabled) that determine all
of the access information for users with Personal Identification
Numbers (PINs). This menu also assigns...

User Guide              Galaxy 8/18/60/128/500/504/512
16 SELECTING CODES
Enter the QUICK MENU. Press key 8 followed by the ent key.
USER CODES
When the CODES option has been selected, press key 1 to access User
Codes. Display each of the user numbers using key A>. Each user
number offers options for PIN, level, name and where applicable time
zones and groups. When the user number to be modified is displayed,
press the ent key to access the MODIFY PIN option.
MODIFY PIN
The MODIFY PIN option allows a pin...

Galaxy 8/18/60/128/500/504/512                           User Guide
17
Table 2. User Access Levels
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
PIN + ent
ent
CODES
1 = User Codes
ent
[ent] to Select
1 = Modify PIN
ent
>A
[ent] to Select
2 = Modify Level
ent
001 Level
	 >_3
ent
001 USER
L3ð
l e v e Lyt i l i b a l i a v A s s e c c A
0
†d r a u Gno i t p o r e h t o o n - y r o m e m t n e v e e h t o t n i d e r e t n E
1
†r e n a e l Cme t s y s e h t t e s y l n o n a C
2
†r e k a t e r a...

User Guide              Galaxy 8/18/60/128/500/504/512
18
0 = OMIT ZONES
[ent] to Select
8
PIN + ent
8 = CODES
[ent] to Select
ent
CODES
1 = User Codes
ent
ent
001 USER
L3	 A1_______ð
[ent] to Select
3 = Modify PIN
3
001 NAME USER_
EFG HIJKLMNØö0 P
ent
[ent] to Select
4 = Time Zone
[ent] to Select
3 = Modify Name
ent
ent
[ent] to Select
0 = OFF
ent
Use the A key
to step through
the four time
zone options.
>A
• QUICK MENU
All  user codes default to the quick menu. This menu is made up of
a selection of...

Galaxy 8/18/60/128/500/504/512                           User Guide
19 TEMPORARY CODES (Galaxy 128, 500, 504 and 512)
Temporary Codes allow a PIN to be temporarily allocated to a user.
On selecting this option, enter the number of days (0 – 99) that the
code is to remain active. The default setting of  0 indicates that the
code is permanent. A temporary code expires and is removed from the
codes list at midnight after the assigned number of days. A code that
has been assigned as a Temporary Code is...

User Guide              Galaxy 8/18/60/128/500/504/512
20 MODIFY GROUPS (Galaxy 18, 60, 128, 500, 504 and 512)
This option determines the system groups that the user has access to
and operational control over. The MODIFY GROUPS option is
only available when the Group Mode has been enabled by the
engineer. The system defaults to groups disabled.
Groups allocated to the user are displayed when the MODIFY
GROUPS option is selected. All users default to Group 1. Pressing
the group number toggles the group...

Galaxy 8/18/60/128/500/504/512                           User Guide
21 • GROUP CHOICE
Users can be allocated to more than one group, but also have the choice
of which of the allocated groups to view, set or unset. Pressing * key
while assigning groups to the user assigns the group choice feature.
Notes:1.The manager has fixed access to all system groups. This
cannot be reprogrammed.
               2.The manager is assigned group choice by default, but the
feature can be removed.
3.Users authorised to...

User Guide              Galaxy 8/18/60/128/500/504/512
22 MAX FUNCTION
The MAX card can be assigned to a single menu option. The user must
be authorised to access the menu option, either by the user level assigned
or by having the menu option access level changed by the engineer.
The default option is Not Used.  A new option is assigned by scrolling
using the A> or )
MAX Function
12 = TIMED SET
ent
9
ent
ÚÚ- KEYPAD
# = Enable
01 - KEYPAD
# = Disable
#
A>
02 - KEYPAD
# = Disable
ent
MAX KEYPAD
The menu...

Galaxy 8/18/60/128/500/504/512                           User Guide
23 MAX USERS
This option is used to assign additional MAX users to the system without
allocating PINs, MAX users are only authorised to operate the Access
Control functions of the MAX modules.
Enter the Codes option and select 3 = MAX Users.  Press the ent key to
display the first MAX user number. Each of the users can be displayed
using the A> and A
ent
8
8 = CODES
[ent] to Select
PIN + ent
ent
CODES
1 = User Codes
3
CODES
3 = MAX...

User Guide              Galaxy 8/18/60/128/500/504/512
24
Max Users
2 = Groups
ent
Groups A 1_______
>A 1_______
ent
Groups B 1_______
>B 1_______
Groups B 1_______
>B 123_____2+3
>A

MAX No
>0000000000
Enter new MAX No.
ent
>Aent
GROUPS
This option assigns group access to the MAX user. The MAX user
must be assigned a group that is common to the MAX moduleto  permit
the access control functions to operate. If the MAX user does not have
access to the group assigned to the module, the access control...