Honeywell series TouchCenter Keypads 6272 User Manual

 
Security (Contd) 
31 
SCREEN ACTION  
The first ten events will be displayed. 
To view all item s, press the Show More 
button and press the up/down arrows to 
scroll through the event log.   
Notes:  
•  W hen  All Partitions  or All Events  
button is pressed, and more than 100 
events exist, the Show More  button 
text will change to read  Next>>. If you 
press the  Next>> button, a 
  and  and  

 
Security (Contd)   
32 
How to Send Emergency Messages 
 
•  Emergency messages are optional and may not be available on your 
system. Ask your system installer if emergency messages are 
available on your system. 
•  The  Emergency  screen cannot be accessed while running a screen 
diagnostic test or while in the clean screen mode. 
An emergency message for fire, panic, or medical can be sent to the 
central monitoring station from the Emergency  screen.  The 
Emergency  screen can be accessed by...

 
33 
Voice Messages  
Introduction to Recording and Retrieving Messages 
The 6272 Series devices provide the capability of recording voice 
messages for others on the premises. The number of messages is not 
limited; however, the total time of all messages added together cannot 
exceed 120 seconds. 
Note: The voice messages are stored in the memory of the 6272 and 
a ll messages will be lost  if the 6272 loses power or if it is reset. 
Voice messages are recorded and retrieved using the “Message...

Voice Messages (Contd) 
 
34 
3.  Press the Stop button when you are done recording the message.  
The message indicator will be flashing and the message will be listed 
in the message list window. 
4.  To record additional messages, repeat steps 2 and 3 above or to 
exit, press the  BACK or HOME  button and the “Home” screen will be 
displayed. 
Retrieving and Deleting a Voice Message 
To retrieve a voice message, do the following: 
1.  From the Home screen, press the MESSAGE button.  The Message...

 
35 
  Setup 
Setup 
Setup allows you to make changes to the way your TouchCenter is 
operating. The options that can be changed are: 
•  Adjust the touch screen brightness  
•   Adjust the TouchCenter sounder volume 
You may access the  Display & Audio Setup , System Setup  (if 
enabled by your system installer), and  Slideshow Setup  from the 
Setup screen by pressing the corresponding button. 
How to Access Setup 
Access the Setup features as follows: 
1.  From  the Hom e screen, press the Setup...

Setup (Contd) 
36 
 
Adjust the Brightness 
You may adjust the brightness settings by pressing your finger on the 
slide bar associated with the Brightness scale and doing the 
following: 
To increase the brightness, move the slide bar above the current 
brightness setting. 
To decrease the brightness, move the slide bar below the current 
brightness setting. If you have made any changes in the brightness settings, when you 
exit this screen a Settings Changed! pop-up window is displayed 
asking Remember...

Setup (Contd) 
37 
Disp & Audio Setup 
Operating Modes  
Operating modes allows you to turn the TouchCenter chime mode on 
or off. Additionally, you may also turn the voice mode on or off. The 
operating modes provide the following features: 
•  Chime Mode – When selected, a request is sent to the alarm panel 
requesting that the panel chime the TouchCenter whenever a 
change in zone status occurs. 
•   Voice Mode – When selected, a request is sent to the alarm panel 
requesting that the panel initiate...

Setup (contd) 
38 
SCREEN ACTION 
5. Touch the Voice Mode button to turn 
the Voice Mode on or off. A checkm ark 
appears in the button when the Voice 
Mode is “ON ”.  Note that if the Chime 
Mode and Voice Mode are both selected, 
the Voice Chime button will automatically 
be selected. 
Press the  “HOME ” or “ BACK ” button after 
making your selection. W hen the 
TouchCenter exits the  “Operating Modes ” 
screen, your selection is saved. 
Language Selection 
The TouchCenter allows you to select from...

Setup (Contd) 
39 
SCREEN ACTION 
5. To select a specified language, choose 
English, French Canadian, Portuguese, 
South American Spanish, European 
Spanish and Italian). Once the language 
is selected, the keypad will revert back to 
Home screen with the selected language 
applied. 
 
 
Backlight Off Activation Time 
When the TouchCenter is left idle, it will automatically turn the 
backlight off after the selected backlight off time has expired (unless 
“Never” option is selected).  To select the...

Setup (contd) 
40 
SCREEN ACTION 
When the update is complete, depending 
on which selection you made, ( Home, 
Back, Home Setup or RESET Home 
Setup) the TouchCenter will go to its  
respective selected screen.  
Homepage After Time 
When the TouchCenter is left idle, it will automatically return to the 
“Home” screen after the selected To Homepage After time has expired 
(unless “Never” option is selected).   
 
  This option is only available if the EN50131 display option is not enabled by the...