Honeywell series TouchCenter Keypads 6272 User Manual

 
 Setup (Contd) 
51 
SCREEN  ACTION 
 
10.  Press the Save button.  The system 
will save the configuration.  W hen the 
save is complete, the User Setup screen 
is displayed with the new user ’s name 
shown. 
 
 
 
 
How to Delete a User 
Delete a User as follows: 
SCREEN ACTION 
Three selections are available: add a 
user, edit a user, or delete a user. 
1.  To delete a user, touch the circle next 
to the user to be deleted and press the 
DELETE USER  button.  The User 
Authorization screen is...

 
Setup (Contd) 
52 
SCREEN ACTION 
3.  Press the appropriate button.  The 
User Setup screen is displayed. 
 
How to Edit a User 
Note: You cannot edit a User’s name or User number. To modify a 
User name or User number, you must delete the User and re-enter 
User. 
Edit a user as follows: 
SCREEN   ACTION 
Three selections are available: add a 
user, edit a user, or delete a user. 
1.  To edit a user, touch the circle next to 
the user to be edited and press the EDIT 
USER button.  The User...

 
 Setup (Contd) 
53 
SCREEN  ACTION 
3.  Select the options needed for this user 
and press the SAVE button.  The 
configuration changes are saved and you 
are returned to the User Setup  screen. 
Safe Mode 
In the rare event that the TouchCenter cannot successfully 
communicate in its graphic mode with the control panel, the Safe 
Mode is a backup mode that ensures that you can communicate with 
your system.  
In this mode, the TouchCenter operates much like a standard non-
graphic keypad so that you...

 
Setup (Contd) 
54 
Note that this is a limited mode of operation. While in this mode: 
•  You can use the Security button to access the Console Emulation 
Mode of operation to try to clear your faults, disarm the system, or 
enter additional Alpha Keypad commands specified in your panel 
User Guide. You can perform almost all functions that you can 
perform from a standard non-graphic alpha keypad. 
•   You can press the “Panic” key and generate Emergency Messages 
as defined in the panels home...

 
 Setup (Contd) 
55 
Yes to the following prompt. Additionally, when using the 
TouchCenter with a residential panel, the panel will download its 
time into the TouchCenter once an hour after the clock is set. 
•   If Get Time  is pressed, the TouchCenter will download the time 
and date from the control panel and exit the Set Time & Date 
screen.  Note: This button appears with residential panels only. 
•   If DST On  (Daylight Savings Time) is selected, the TouchCenter 
will adjust for Daylight...

 
Setup (Contd) 
56 
SCREEN ACTION 
3.  Select if you want Daylight Savings 
Time to affect your system clock by 
touching the DST button.  
The DST screen is displayed. 
4.  On the Daylight Savings screen, 
press the  M onth arrow button in the 
“ Start DST ” area of the screen.  A drop-
down list displaying the Months is 
displayed. 
5.  Select the month you want by pressing 
it.  The drop-down list closes automatically 
and the selection is displayed. 
 
6.  On the Daylight Savings screen, 
press the...

 
 Setup (Contd) 
57 
SCREEN ACTION 
10.  On the Daylight Savings screen, 
press the Weekend  arrow button in the 
“ End DST ” area of the screen.  A drop-
down list displaying the weeks is 
displayed. 
11.  Select the week you want by pressing 
it.  The drop-down list closes automatically 
and the selection is displayed. 
 
12.  On the Daylight Savings screen, 
press the arrow button to the right of the 
time (1 AM or 2 AM) on the screen.  A 
drop-down list displaying 1 AM and 2AM 
is displayed. 
Make...

 
Setup (Contd) 
58 
SCREEN ACTION 
3.  On the Time and Date screen, press 
the Year that is being displayed.  A Year 
screen is displayed with the instructions to 
Enter 4 digits for the year . 
4.  Enter the four digits for the current 
year. 
The window closes automatically and the 
selection is displayed. 
5. On the Tim e and Date screen, press 
the Hour that is being displayed.  An hour 
screen is displayed with the instructions to 
Enter 2 digits for the hour . 
6. Enter the two digits for the...

 
 Setup (Contd) 
59 
SCREEN ACTION 
7. On the Tim e and Date screen, press 
the Minutes that is being displayed.  A 
minute screen is displayed with the 
instructions to Enter 2 digits for the 
minutes . 
8. Enter the two digits for the current 
minute. 
The window closes automatically and the 
selection is displayed. 
9.  Select if it is AM or PM by pressing on 
the AM or PM display on the screen. Each 
depression switches the AM/PM display. 
10. Select the day of the month by 
touching the proper day...

 
Setup (Contd) 
60 
SCREEN ACTION 
14. On the Time and Date screen, press 
the Apply button.  A confirmation screen 
is displayed. 
15. Press the Yes  button to save the time 
changes in your security system or press 
the No  button to have the changes affect 
the TouchCenter only. 
Note:  A Yes  response is recommended.