HP Ac100 User Manual

							 
10
2.  Use of Memory Card
 
1. Push the Micro-SD card into the card slot until it “clicks”/locks into position. 
2. To remove the Micro-SD card, gently press the end of the memory card inward until a click is heard, 
release pressure and remove. 
  
 
 
 Warning: Do not remove the micro-SD card while data is being recorded or the Action Cam is powered on. Doing so may 
corrupt video/photos and damage the card.  
Note: No built-in memory is available in this video camcorder. Make sure to insert a memory card before using. 
(Advise using Micro-SD cards speed class 6 or above) 
  
						

							 
11
3.  Startup/Shutdown
 
3.1  Startup: Press and hold the POWER button for 2 seconds. The screen of the display is activated and 
the camera is turned on. 
 
 
 
    
 
 
 
    3.2  Shut down: Press the POWER button and hold, until the Action Cam powers down.   
3.3    Auto Screen-off: When the Action Cam is idle for about a minute, the screen will automatically power 
off to conserve battery power. Touch the screen or push the display screen off/on button to resume. 
If idle for nearly 5 minutes, the Action Cam will power down. 
3.4    Shutdown at low battery level: When the battery capacity drops to a depleted level, the        icon will 
appear on the LCD display, Please charge the battery, When the icon turns red and flashing, the video 
camera will shut down automatically.        
						

							 
12
4.    Swithing Function Modes 
 
The Action Cam has 4 modes: video recording mode, Vehicle recording mode, photo mode and playback mode. 
These modes can be switched by touching the icon in the upper left corner of the LCD display (lower right for 
playback) after startup. 
 
   
 
Video recording mode       Photo mode           Vehicle mode         Playback mode 
5. Indicator light  When the Action Cam is powered on but idle, the indicator light will be a solid blue color. 
When the Action Cam is recording video or taking pictures, the indicator light will flash blue. 
When the Action Cam is charging, the indicator light will be a solid red.    Once fully charged, the indicator light 
will turn off. 
  
						

							 
13
6.  Video recording mode 
When the Action Cam is powered up, it will be in video recording mode. Begin recording video by pressing the 
shutter button or touching the focus brackets on the LCD in the live view state. To stop video recording, just 
press this shutter button or touch the focus brackets. When the memory card is full or the battery drops to a 
depleted level, the Action Cam will automatically stop video recording. 
 Video screen layout 
 1. Mode icon: currently indicating in video record mode.       
2. Video resolution and speed: Options are FHD (1080p 
@30fps) / HD (720p @60fps) / HD (720p @30 fps). 
Touch to adjust to the desired resolution.                     
3. Recording time: indicates the approximate remaining 
recording time left on the micro-SD memory card. 
4. Date and Time setting icon. Touch to adjust the date 
and time.   
5. Battery icon: indicates the approximate battery level.   
6. Digital zoom-in icon: touch to digitally zoom in on the 
subject.  
						

							 
14
7. Digital zoom magnification level: up to 4x zoom. 
8. Digital zoom-out icon: touch to digitally zoom out on the subject. 
9. Playback icon: touch to display the Playback content icons. 
10. Playback content icons: these icons will be displayed after touch the Playback icon. Touch the video icon 
to playback recorded video. Touch the photo icon to playback captured photos. Touch the vehicle icon to 
playback the loop recorded video files. 
 7. Photo mode:
 
When the Action Cam is powered up, it will be in video recording mode. To switch to the photo mode, touch the 
mode icon until the Photo mode is displayed. You can take photos by pressing the shutter button or touching 
the focus brackets in the center of the LCD. 
 
1. Mode icon: currently indicating in photo mode. 
2. Photo size icon: options are 5M/8M/10M/12M. 
3. Counter: Indicates the approximate number of remaining photos that can be taken. 
4. Face Tracking icon: touch to enable or disable face tracking. 
5. Date and Time setting icon. Touch to adjust the date and time.   
6. Battery icon: indicates the approximate battery level.  
						

							 
15
7. Digital zoom-in icon: touch to digitally zoom in on the 
subject. 
8. Digital zoom magnification level: up to 4x zoom. 
9. Digital zoom-out icon: touch to digitally zoom out on         
the subject. 
10. Playback icon: touch to display the Playback content       
icons. 
11. Playback content icons: these icons will be displayed   
after touch the Playback icon. Touch the video icon to   
playback recorded video. Touch the photo icon to   
playback captured photos. Touch the vehicle icon to   
playback the loop recorded video files. 
12. Additional photo mode features: touch to select OFF,   
10s self timer, 3 photo burst.   
 
 
 
  
						

							 
16
4
1
2
3
65
7 
8. Vehicle mode: 
1. Mode icon: currently indicating in vehicle mode. 
2. Video resolution and speed: Options are FHD (1080p @30fps) 
    / HD (720p @60fps) / HD (720p @30 fps). 
Touch to adjust to the desired resolution. 
3. Recording time: indicating the length of remaining time   
to be recorded. 
4. Date and Time setting icon. Touch to adjust the date and time.   
5. Display orientation icon: touch this icon to flip the display 
      180 degrees to adjust for mounting orientation. 
6. Battery icon: indicates the approximate battery level. 
7. Playback icon: touch to display the Playback content icons.   
 
Note:   Touch this icon, the display can be flipped 180 degrees to take video normally, click again 
to change back. This feature is available only in vehicle mode.
 
 
  
						

							 
17
9. Playback mode: 
 9.1  After powering on the camera touch the Playback icon (
) in the lower right corner of the LCD display 
to activate the menu (
). Click the 
/
  to switch to the file list mode. Then playback 
video clips by touching a file name in the list.
 
 
 
 
 
 
 
 
 
 Touch to display recorded video files         
 Touch to display recorded vehicle video files
 
 Touch to display captured photo files 
  
						

							 
18
9.2   Playback video clips: 
 
In the playback mode, press   
  to pause.    Touch the fast forward icon 
  to forward quickly and 
touch the fast rewind icon 
 to reverse quickly. 
Press STOP 
  to exit the playback mode to return to the list options. 
9.3 Playback photos: 
After powering on the camera and enabling the Preview state, touch the Playback icon (
) in the lower 
right corner of the LCD display to activate the menu (
). Press the 
  to switch to the photo 
playback mode. View the next or previous photos by pressing the ◄ or ► icons as shown on the 
following page.  
						

							 
19
 
 
 
                                          
 
 
 
 
 
9.4 File deletion:
 
After touching the Delete File icon 
  , the screen will appear as shown below:
 
 
 
 
 
 
 
Touch the YES option to delete the current file immediately, or click NO to cancel the deletion operation.