HP Color LaserJet 4700dn User Manual

							
Automatic duplex printingDimensionsWeight or thickness 
A4: 210 x 297 mm (8.27 x 11.7
in)
8.5 x 13: 215.9 x 330.2 mm
(8.5 x 13 in)
Legal: 215.9 x 355.6 mm (8.5
x 14 in)
Executive: 184.2 x 266.7 mm
(7.25 x 10.5 in)
JIS B5: 182 x 257 mm (7.17 x
10.12 in)
Glossy paper (A4/letter, 13 x
8.5 in, legal, executive, JIS
B5)
NOTEDo not use
inkjet papers in this
printer.
See above for standard sizes
supportedRange:
75 g/m
2 (20 lb) bond to 120 g/
m2 (32 lb) bond
 
HP Color Laser Glossy
Photo & Imaging Paper (A4/
letter)
NOTE Do not use
inkjet papers in this
printer.
Standard sizes:
Letter: 215.9 x 279.4 mm (8.5
x 11 in)
A4: 210 x 297 mm (8.27 x 11.7
in) 120 g/m2 (32 lb) bond
 
Table 1-5
   Stapler/stacker
Stapler/stackerDimensionsWeight or thicknessCapacity
Stacking with offset
NOTEMedia
types: paper and
cardstock, glossy
paper,
transparencies,
photo paper
Printing from Tray 1:
76 x 127 mm (3 x 5 in) to 216
x 356 mm (8.5 x 14 in)
Printing from Tray 2 and
optional trays:
148 x 210 mm (5.83 x 8.27 in)
216 x 356 mm to (8.5 x 14 in)Range:
60 g/m
2 (16 lb) bond to 120 g/
m2 (32 lb) bond
NOTE The stapler/
stacker bin has a
capacity of 750
sheets of 75 g/m
2 (20
lb) bond.
Stacking without offset
NOTE See above
for supported media
types.
Printing from Tray 1:
76 x 127 mm (3 x 5 in) to 216
x 356 mm (8.5 x 14 in)
Printing from Tray 2 and
optional trays:
148 x 210 mm (5.83 x 8.27 in)
to 216 x 356 mm (8.5 x 14 in) Range:
75 g/m
2 (20 lb) bond to 120 g/
m2 (32 lb) bond  
Table 1-4
   Automatic duplex printing (two-sided printing) (continued)
ENWW Print media specifications 35
 
						

							
Stapler/stackerDimensionsWeight or thicknessCapacity
Stapling (30 sheets)
NOTEMedia
types: paper and
cardstock, glossy
paper,
transparencies,
photo paper
NOTE See above
for supported trays
and media sizes.60 g/m2 (16 lb) to 160 g/m2
(43 lb)
 
Stapling (20 sheets)
NOTE See above
for supported media
types.
NOTE See above
for supported trays
and media sizes.60 g/m2 (16 lb) to 220 g/m2
(53 lb)  
Table 1-5
   Stapler/stacker (continued)
36 Chapter 1   Printer basics ENWW
 
						

							
2 Control panel
This chapter contains information on the printer control panel, which provides control of printer functions
and communicates information about the printer and print jobs. The following topics are covered:
●
Introduction
●
Control panel buttons
●
Interpreting control panel indicator lights
●
Interpreting stapler/stacker indicator light codes
●
Control panel menus
●
Menu hierarchy
●
Retrieve job menu
●
Information menu
●
Paper handling menu
●
Configure device menu
●
Diagnostics menu
●
Changing printer control panel configuration settings
●
Using the printer control panel in shared environments
ENWW 37
 
						

							
Introduction
The control panel provides control of printer functions and communicates information about the printer
and print jobs. Its display provides graphic information about printer and supplies status, making it easy
to identify and correct problems.
Figure 2-1   Control panel buttons and lights
1Display
2Up arrow () button
3Select ( ) button
4Down arrow () button
5Stop button
6Attention light
7Data  light
8Ready  light
9Menu button
10Back/Exit  () button
11Help () button
The printer communicates via the display and the lights on the lower left side of the control panel.
The Ready , Data , and  Attention  lights provide at-a-glance information about the state of the printer and
alert you to printing problems. The display shows more complete status information as well as menus,
help information, animations, and error messages.
Display
The four-line control panel display gives you complete, timely information about the printer and print
jobs. Graphics illustrate levels of supplies, the locations of paper jams, and job status. Menus give
access to printer functions and detailed status information.
The top-level screen on the display has two areas:
38 Chapter 2   Control panel ENWW
 
						

							
Figure 2-2   Printer display
1Message area
2Prompt area
Figure 2-3   Printer display
1Message area
2Supplies gauge
3Print cartridge colors are indicated from left to right: black, magenta, cyan, and yellow
The message and prompt areas of the display alert you to the state of the printer and tell you how to
respond.
The supplies gauge shows the consumption levels of pr int cartridges (black, magenta, cyan, and yellow).
A 
 appears instead of the consumption level when the level is not known. This can occur in the following
circumstances:
● Missing cartridges
● Incorrectly placed cartridges
● Cartridges with an error
● Some non-HP cartridges
The supplies gauge appears whenever the printer shows the  Ready state with no warnings. It will also
appear when the printer shows a warning or error message concerning a print cartridge or multiple
supplies.
ENWW Introduction 39
 
						

							
Accessing the control panel from a computer
You can also access the printer control panel from a computer by using the Settings page of the
embedded Web server.
The computer shows the same information that the control panel shows. From your computer, you can
also perform control panel functions such as checking supplies status, viewing messages, or changing
tray configuration. For more information, see 
Using the embedded Web server.
40 Chapter 2   Control panel ENWW
 
						

							
Control panel buttons
Use the buttons on the control panel to perform printer functions and to navigate and respond to menus
and messages in the display.
Button nameFunction
 SelectMakes selections and resumes printing after recovery errors.
  Up arrow
 Down arrow
Navigates menus and text, and increases or dec reases the values of numerical items
in the display.
  Back/exit arrowNavigates backward in nested menus, or quits menus or help.
MenuAccesses and exits the menus.
StopPauses the current job and provides options  to resume printing or to cancel the current
job.
  Help Provides animated graphics and detailed in
formation on printer messages or menus.
ENWW Control panel buttons 41
 
						

							
Interpreting control panel indicator lights
Figure 2-4   Control panel indicator lights
1Ready
2Data
3Attention
Indicator
OnOffFlashing
Ready
(green)Printer is online (able to
accept and process data).Printer is offline or is turned
off.Printer is attempting to stop
printing and go offline.
Data
(green)Processed data is present in
the printer, but more data is
needed to complete the job.Printer is not processing or
receiving data.Printer is processing and
receiving data.
Attention
(amber) A critical error has occurred.
Printer requires attention.
No conditions exist that
require attention.An error has occurred. Printer
requires attention.
42 Chapter 2   Control panel
ENWW
 
						

							
Interpreting stapler/stacker indicator light codes
The following table lists errors that can occur in the stapler/stacker unit that are reported by the accessory
light and on the printer control panel display.
IndicatorSolidBlinkingOff
Green
NOTEThe
indicator light shows
solid green during
some continuable
errors.
● The accessory is ready
and is functioning
properly.
● Fewer than 20 staples
remain in the stapler
cartridge. 
STAPLER
LOW ON STAPLES
appears on the printer
control panel display.
Order and replace the
stapler cartridge.
● The number of pages in
the job exceeds the 30-
page limit for stapling.
TOO MANY PAGES IN
JOB TO STAPLE
appears on the printer
control panel display.
For jobs larger than 30
pages, staple the pages
manually.
● The job contains
different paper sizes.
The stapler cannot align
the paper for stapling. If
stapling is required, print
the job on same-sizeN/A●
The stapler/stacker is in
sleep mode, the printer
is turned off, or the
stapler/stacker is not
installed properly.
ENWW
Interpreting stapler/stacker indicator light codes 43
 
						

							
IndicatorSolidBlinkingOff
paper, or staple the job
manually. MIXED
PAPER SIZES IN JOB
TO STAPLE  appears on
the printer control panel
display.
Amber ●The accessory is
experiencing a hardware
malfunction.
For more information,
see 
Control panel
messages. ●
The device requires user
intervention. The bin
could be full, there could
be a stapler jam, or the
stapler cartridge could
require replacement. For
more information, see
Control panelmessages
.
If the message
CORRUPT FIRMWARE
IN  EXTERNAL
ACCESSORY  appears,
download the firmware
again.
● There is a paper jam, or
a sheet needs to be
removed from the unit,
even if the sheet is not
jammed. For more
information, see 
Jams inthe stapler/stacker
.
● The bin is full. Empty the
bin before continuing.
● There are fewer than 30
staples remaining in the
stapler cartridge. To
avoid jams, these
staples should not be
used. Order and install a
new stapler cartridge
before continuing.
● The bin is in the up
position. Lower the bin
before continuing.
● The jam access door is
open. Close the door
before continuing.
● The stapler unit is open.
Close the unit before
continuing. N/A
44 Chapter 2   Control panel
ENWW