HP Color LaserJet CM1017 User Manual

2Magenta cartridge
3Cyan cartridge
4Yellow cartridge
5Black cartridge
CAUTIONDo not place anything on the transfer belt, located on the inside of the front door.
Otherwise, the MFP can be damaged, adversely affecting print quality.
ENWW Walkaround 7
 

Software
Software and supported operating systems
For MFP setup and access to the full range of MFP features, HP strongly recommends installing the
software provided. Not all software is available in all languages. See the Getting Started Guide for
installation instructions, and see the Install Notes file for the latest software information.
The most recent drivers, additional drivers, and other software are available from the Internet and other
sources. When Internet access is not available, see 
HP...

Install software
The HP installer provides two workstation software installation options: Recommended or Custom. A
Recommended installation installs software based on the workstations operating system processor,
memory, and disk space. A Custom installation installs only user-specified software options.
The system requirements for the installed software is:
●300 MB free hard disk space
●CD-ROM drive
●USB port and USB cable or network RJ45 and cable
Requirements for PC systems:
●Windows® 2000, XP, 2003...

Software tips
Use these tips to learn more about the MFP software.
Download the latest printing software
Check for and install upgrades to the printing software by downloading the drivers from the World Wide
Web or HP’s file transfer protocol (FTP) servers.
Download drivers
1.Go to 
http://www.hp.com/support/cljCM1015_CM1017. Click support & drivers block.
2.The Web page for the drivers might be in English, but the drivers themselves can be downloaded
in several languages.
When Internet access is not...

2 Print media
●Media supported on this MFP
●
Select print media
●
Special media for printing
ENWW11
 

Media supported on this MFP
Before purchasing large quantities of print media, always test a sample and make sure that the print
media meets the requirements specified in this user guide and in the HP LaserJet Printer Family Print
Media Guide  at 
http://www.hp.com/support/ljpaperguide . For ordering information, see Accessories and
supplies information.
CAUTIONUsing print media that does not meet HP specifications can damage the MFP,
requiring repair. This repair is not covered by the Hewlett-Packard...

Table 2-1  Tray specifications
Media TypeDimensions1WeightCapacity2
PaperMinimum: 76 x 127 mm
(3 x 5 inches)60 to 163 g/m2 (16 to 43 lb)
Up to 176 g/m
2 (47 lb) for
postcards
Tray 1: Single sheet of paper
Tray 2: Up to 250 sheets
Tray 3 (optional): Up to 250 sheets
NOTETray 3 does not
accept postcards,
envelopes, or other special
media.
Maximum: 216 x 356 mm
(8.5 x 14 inches)
HP LaserJet glossy paper and
HP LaserJet Photo paper4Identical to Paper75 to 220 g/m2 (20 to 58 lb)Tray 1: Single sheet of HP...

Select print media
Consider these factors when choosing print media.
Media that can damage the printer
Do not use media that can damage the printer.
●Do not use media with staples attached.
●Do not use transparencies, labels, photo, or glossy paper designed for inkjet printers or other low
temperature printers. Use only media that is specified for use with HP Color LaserJet printers.
●Do not use paper that is embossed or coated and is not designed for the temperatures of the fuser.
●Do not use letterhead...

Special media for printing
This MFP supports printing on special media.
For tray, media orientation, and driver settings, see 
Print on special media.
For instructions on loading envelopes, see 
Load tray 1 (single-sheet feed tray)  or Load tray 2.
Envelopes
●Store envelopes flat.
● Envelopes should not be wrinkled, nicked, stuck together, or otherwise damaged. Do not use
envelopes that have clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic
materials.
● Only use envelopes...

For instructions on loading labels, see Load tray 1 (single-sheet feed tray) or Load tray 2.
Transparencies
●Use only tray 1 or tray 2 to print on transparencies.
● For tray, media orientation, and driver settings, see 
Print on special media
.
● Place transparencies on a flat surface after removing from the MFP.
● Use only transparencies specified for use with HP Color LaserJet printers.
CAUTION
To avoid MFP damage, only use transparencies that are recommended for use in
laser MFPs. See 
Accessories...