HP Color LaserJet CM1017 User Manual

3 Control panel
●HP Color LaserJet CM1015 MFP control panel features
●
Use the two-line display (HP Color LaserJet CM1015 MFP)
●
HP Color LaserJet CM1017 MFP control panel features
●
Use the graphical display (HP Color LaserJet CM1017 MFP)
●
Control-panel menus
ENWW17
 

HP Color LaserJet CM1015 MFP control panel features
The HP Color LaserJet CM1015 MFP contains the following lights and buttons on the control panel:
NOTEPrint a demo page by pressing the  Scan To and Start Scan  buttons simultaneously.
1Supplies gauges: Displays consumption levels of print cartridges. Appears when the MFP shows the Ready state with
no warnings, or when the MFP shows a warning or error message pertaining to a print cartridge or multiple supplies.
When the supply is empty the gauge...

4Cancel (X) : Whenever the Ready light blinks, press to cancel a print job. Pressing this button also exits the control-panel
menus.
5OK:
●Selects a menu item
●Clears some printer-errors
●Acknowledges use of a non-HP supply
6Start Scan: Starts scanning to the previously selected e-mail or folder destination. The MFP can also start a scan if a
destination is not specified.
7Quality: Press the Left arrow or the Right arrow to control copy quality.
8# of Copies: Press the Left arrow or the Right arrow to...

Use the two-line display (HP Color LaserJet CM1015 MFP)
The two-line display shows menus, and messages. The display can be pulled up and angled for better
viewing. Use the arrows on the control panel to navigate the menus on the control panel. Status and
error messages will be displayed on the screen.
Use the control-panel arrows to navigate on the HP Color LaserJet
CM1015 MFP
●Press the Left arrow or Right arrow to navigate through all control panel menus.
●Press Back to return to the previous menu....

HP Color LaserJet CM1017 MFP control panel features
The HP Color LaserJet CM1017 MFP contains the following lights and buttons on the control panel:
NOTEPrint a demo page by pressing the  Scan To and Start Scan  buttons simultaneously.
1Graphical display. Message, menus, and supply gauge area.
Supplies gauges: Displays consumption levels of pr int cartridges. Appears when the MFP shows the Ready
state with no warnings, or when the MFP shows a warn ing or error message pertaining to a print cartridge
or...

4Cancel (X): Whenever the Ready light blinks, press to cancel a print job. Pressing this button also exits the
control-panel menus.
5Right arrow (>): Press to navigate to the next submenu or the next value in the menu selection list. Also
allows cursor movement forward a single position, or increments a numeric entry.
6Down arrow (v): Press to navigate to the menu item below the current menu item.
7Start Photo: Press to print one or more photos.
8Proofsheet: Press to print a proofsheet.
9Start Scan:...

Use the graphical display (HP Color LaserJet CM1017 MFP)
The color graphics display shows menus, photos, and messages. The display can be pulled up and
angled for better viewing. Use the arrows on the control panel to navigate the menus on the control
panel and to select photos on the panel for printing. Status and error messages will be displayed on the
screen.
After 60 minutes of inactivity, the color graphics display goes into Sleep State and the screen shuts off
completely. The display turns back on...

Control-panel menus
Use the control-panel menus
To gain access to the control-panel menus, use the following steps.
1.Press Menu.
2.On the HP Color LaserJet CM1015 MFP, press Left arrow or Right arrow to navigate the listings.
On the HP Color LaserJet CM1017 MFP, press Up arrow or Down arrow to navigate the listings.
●Press OK to select the appropriate option.
●Press Cancel to cancel an action or return to the Ready state.
●Press Back to move to the previous menu.
Control-panel menu map
These menus are...

Menu itemSub-menu itemSub-menu itemDescription
 Contrast Increases or decreases the
differences between whites
and blacks of a copy.
 Lightness Increases or decreases the
background color in a copy.
 Grayness Increases or decreases the
color in the color copy of a
black and white original.
 Sharpen Increases or decreases the
reproduction details in a copy.
 Restrict color Permits the enabling or
disabling of color copies.
Restore defaults  Sets all customized copy
settings to the factory default
values....

Menu ItemDescription
PCL6 font listPrints a list of all installed PCL6 fonts.
Service pageStarts the cleaning mode and restores
factory settings.
Table 3-3  Photo Setup Menu (Available only from HP Color LaserJet CM1017 MFP)
Menu ItemDescription
Default image sizeSet up default image size.
Default light/dark
Default # of copiesSet up default number of copies.
Default output colorSet up default output color.
Restore defaultsResets all photo items to their factory defaults. Machine does
not power cycle....