Iiyama Prolite E1706s 1 User Manual

  ENGLISH
USER MANUAL
Thank you very much for choosing the iiyama 
LCD monitor.
We recommend that you take a few minutes 
to read carefully through this brief but 
comprehensive manual before installing and 
switching on the monitor. Please keep this 
manual in a safe place for your 
future reference. 

ENGLISH 

ENGLISH
 
 
 
 
 
 
Congratulations! 
 
This product is TCO Certified  for Sustainable IT 
 TCO Certified is an international third party sustainability certification for 
IT products. TCO Certified ensures that the manufacture, use and 
recycling of IT products reflect environmental, social and economic 
responsibility.  Every TCO Certified product model is verified by an 
accredited independent test laboratory.  
 
 
This product has been verified to meet all the criteria in TCO Certified, including:...

ENGLISH
  We reserve the right to change specifi cations without notice.
  All trademarks used in this user manual are the property of their respective owners.
  As an ENERGY STAR
® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines 
for energy effi ciency.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2004/108/EC “EMC 
Directive”, 2006/95/EC “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU...

ENGLISH
We recommend recycling of used product. Please contact your dealer or iiyama 
service center. Recycle information is obtained via the Internet, using the address:  
http://www.iiyama.com
You can access the Web page of different countries from there. 
TABLE OF CONTENTS
FOR YOUR SAFETY ..........................................................................1
SAFETY PRECAUTIONS ..............................................................1
SPECIAL NOTES ON LCD MONITORS...

ENGLISH
  FOR YOUR SAFETY  1  
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLEIf you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the 
monitor and contact your dealer or iiyama service center immediately. Further use may be 
dangerous and can cause fi re or electric shock.
NEVER REMOVE THE CABINETHigh voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of 
fi re or electric shock.
DO NOT PUT ANY OBJECT INTO THE...

ENGLISH
2  FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATIONDo not install the monitor where sudden temperature changes may occur, or in humid, dusty or 
smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the 
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITIONThe monitor may topple and cause injury if not suitably located. Please also ensure that you do not 
place any heavy objects on the monitor, and that all cables are routed such...

ENGLISH
  FOR YOUR SAFETY  3  
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTEWhen you fi rst turn on the LCD monitor, the picture may not fi t in the display area 
because of the type of computer that is used. In this case, adjust the picture position 
to the correct position.
Due to the nature of the backlight, the screen may fl icker during initial use. Turn off 
the Power Switch and then turn it on again to make sure the fl icker disappears.
You may fi nd...

ENGLISH
4  BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with 
the monitor. If anything is missing or damaged, please contact your local  iiyama dealer or regional 
iiyama offi ce.
*
1  The rating of  the Power Cable enclosed in 120V area is 10A/125V. If you are using  
  a power supply higher than this rating, then a power cable with a rating of 
10A/250V must be used.However, all guarantees and warranties are void for any...

ENGLISH
  BEFORE YOU OPERATE THE MONITOR  5  
Put the monitor on a stable surface. The monitor may cause injury or damage if it 
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.  The monitor is supplied complete with a stand-base.  If you prefer to wall mount the monitor, please 
follow the instructions below to remove the stand-base. Be sure to include the stand with the...