Iiyama Prolite E1706s 1 User Manual

ENGLISH
16  OPERATING THE MONITOR
Adjustment Item Problem / Option                                      Button to Press
Color Temp.
Yellowish white Bluish white
User-G User-R
User-BToo weak
Too strong User
Greenish whiteNormal Mode1
Mode2
High contrast Dark
Mode3
Color Temp.
Gamma
User-R
User-G
User-B50
50
Mode1
50
Color Temp.Warm
Gamma
Color Temp.
Normal
Warm Cool
sRGB
sRGB
NOTEsRGB is an international standard which defi nes and unifi es the difference of color 
appearance between equipment. 
 You can...

ENGLISH
  OPERATING THE MONITOR  17  
Language
English
DeutschEnglish
German
Français French
Japanese
Portuguese
Italiano Italian
Russian
Simplifi ed Chinese 
Español Spanish
Portuguese
Timeout
H.PositionOSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time 
between 5 and 60 seconds.
Adjustment Item Problem / Option                                      Button to Press
OSD Setup
V.Position
OSD Setup
H.Position
V.Position
Timeout
Language50
50
English50 

ENGLISH
18  OPERATING THE MONITOR
See your graphic card user guide for more information 
about changing the resolution and refresh.  NOTE
Displays information regarding the current input signal coming 
from the graphic card in your computer.
Information
Adjustment Item Problem / Option                                      Button to Press
Others
ResetFactory-preset data is restored.NoReturn to Menu. Ye s
Signal Select
At selected Auto, you can switch the input source by pressing and holding of the AUTO...

ENGLISH
  OPERATING THE MONITOR  19  
Adjustment Item Problem / Option                                      Button to Press
VolumeToo soft
Too loud
Adjustment Item Problem / Option                                      Button to Press
Auto Adjust  * You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
Direct
Adjust H. / V. Position, Clock and Phase automatically.
*   For best results, use the Auto Adjust in conjunction with the adjustment pattern....

ENGLISH
20  OPERATING THE MONITOR
SCREEN ADJUSTMENTS
 The screen adjustments described in this manual are designed to set image position and minimize 
fl icker or blur for the particular computer in use. 
 
The monitor is designed to provide the best performance at resolution of 1280 × 1024, but can not 
provide the best at resolutions of less than 1280 × 1024 because the picture is automatically stretched 
to fi t the full screen. It is recommended to operate at resolution of 1280 × 1024 in normal use....

ENGLISH
  OPERATING THE MONITOR  21  
F  1) Adjust the H.Position so that the left side of the picture frame will move to the left edge  
    of the display area.
 When the left side of the picture frame moves apart from the left edge of the display 
area during the Clock adjustment, adjust steps 1) and 2).
 Another way to make the Clock adjustment is to correct the vertical wavy lines in the 
zebra pattern.
 The picture may fl icker during the Clock, H.Position and V.Position adjustment.
 In case the...

ENGLISH
22  OPERATING THE MONITOR
 In case the strong fl icker or blurs remain on a part of the screen, repeat steps 
F and 
G  because the Clock may not be adjusted correctly. If the fl icker or blurs still remain, 
set the refresh rate of computer to low (60Hz) and repeat steps from 
C again.
 Adjust the H.Position after the Phase adjustment if the horizontal position moves 
during the adjustment.
H Adjust the Brightness and Color to get the desired picture after you complete the Clock 
and Phase...

ENGLISH
  OPERATING THE MONITOR  23  
Even when using the power management mode, the monitor consumes electricity. 
Turn off the Power Switch whenever the monitor is not in use, during the night and 
weekends, to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync 
signal is missing. In this instance, the POWER MANAGEMENT feature may not work 
properly.NOTE
POWER MANAGEMENT FEATURE
Power Management Mode
When the H-sync signal /...

ENGLISH
24  TROUBLE SHOOTING
TROUBLE SHOOTING
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem 
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERATING THE 
MONITOR or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the 
problem, discontinue using the monitor and contact your dealer or iiyama service...

ENGLISH
  TROUBLESHOOTING / Recycling information  25  
F  No sound.The audio equipment (computer etc.) is ON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
The audio output level of the audio equipment is within the specifi cation of 
the monitor.
G  The sound is too 
loud or too quiet.The audio output level of the audio equipment is within the specifi cation of 
the monitor.
H  A strange noise is 
heard.The Audio Cable is properly connected.
For better...