Iiyama Prolite E1706s 1 User Manual

ENGLISH
6  BEFORE YOU OPERATE THE MONITOR
Install the stand on a stable surface. The monitor may cause injury or damage if it 
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.CAUTION

A   Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.  
Lay the monitor fl at on a table with front face down. 
B   Hold the monitor and push the Stand.
C  Hold the...

ENGLISH
  BEFORE YOU OPERATE THE MONITOR  7  
A   Power Switch (     ) 
B  Menu / Select Button (MENU)
C   + / Volume Button ( + )
D  - / ECO Button ( - ) 
E   Auto Button (AUTO)
F  Power Indicator 
Blue: Normal operation
Orange: Power Management
G  Speakers 
H   D-SUB mini 15pin Connector (D-SUB)
I  DVI-D 24pin Connector (DVI-D)
J  Cable Holder
K  Audio Connector (AUDIO IN)
 
L  AC Connector (AC IN) 
M   Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being...

ENGLISH
8  BEFORE YOU OPERATE THE MONITOR
A   Power Switch (     ) 
B  Menu / Select Button (MENU)
C   + / Volume Button ( + )
D  - / ECO Button ( - ) 
E   Auto Button (AUTO)
F  Power Indicator 
Blue: Normal operation
Orange: Power Management
G   Speakers 
H   D-SUB mini 15pin Connector (D-SUB)
I  DVI-D 24pin Connector (DVI-D)
J  Audio Connector (AUDIO IN)
 
K  AC Connector (AC IN)
L  Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed 
without...

ENGLISH
  BEFORE YOU OPERATE THE MONITOR  9  
Power Cable
(Accessory)
Audio Cable (Accessory)D-Sub Signal Cable  
(Accessory)
DVI-D Signal Cable 
(Accessory)Computer
CONNECTING YOUR MONITOR : ProLite B1706S
[Example of Connection] A   Ensure that both the computer and the monitor are switched off.
B   Connect the computer to the monitor with the signal cable.
C  Connect the monitor to the audio equipment with the Audio Cable for computer when using the 
audio features.
D   Connect the Power Cable to the...

ENGLISH
10  BEFORE YOU OPERATE THE MONITOR
Power Cable
(Accessory)
Audio Cable (Accessory)
Computer D-Sub Signal Cable  
(Accessory)
DVI-D Signal Cable 
(Accessory)
CONNECTING YOUR MONITOR : ProLite E1706S
[Example of Connection] A   Ensure that both the computer and the monitor are switched off.
B   Connect the computer to the monitor with the signal cable.
C  Connect the monitor to the audio equipment with the Audio Cable for computer when using the 
audio features.
D   Connect the Power Cable to the...

ENGLISH
  BEFORE YOU OPERATE THE MONITOR  11  
 Signal Timing
  Change to the desired signal timing listed on page 29: COMPLIANT TIMING.
COMPUTER SETTING
20
5
ADJUSTING THE VIEWING ANGLE : ProLite E1706S
 For optimal viewing it is recommended to look at the full 
face of the monitor.
 Hold the stand so that the monitor does not topple when 
you change the monitor’s angle.
 You are able to adjust the monitor’s angle up to 20 
degrees upward, 5 degrees downward. 
 In order to ensure a healthy and...

ENGLISH
12  BEFORE YOU OPERATE THE MONITOR
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1706S
 For optimal viewing it is recommended to position 
yourself directly opposite to the full face of the 
monitor, then adjust the monitor’s height and 
angle to your own preference.
 Hold the panel so that the monitor does not 
topple when you change the monitor’s height or 
angle.
 You are able to adjust the monitors height up to 
110mm, angle up to 170 degrees right and left, 
20 degrees upward.
...

ENGLISH
  OPERATING THE MONITOR  13  
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the 
COMPLIANT TIMING shown on page 29. You are also able to adjust the picture by following 
the button operation shown below. For more detailed adjustments, see page 20 for SCREEN 
ADJUSTMENTS.
  Press the MENU Button to start the On Screen Display feature. There are additional 
Menu items which can be switched by using the + / - Buttons.  
B  Select the...

ENGLISH
14  OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option                                      Button to Press
Luminance
Too dark 
Too bright Brightness * ContrastToo dull
Too intense
*
  Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too 
bright.
Luminance
Contrast
Brightness
Eco
Picture Mode50
50
Off
Standard
ACR
ON
Mode1 Brightness of back-light is reduced.
Mode2Brightness of back-light is reduced more than Mode1. Off...

ENGLISH
  OPERATING THE MONITOR  15  
Adjustment Item Problem / Option                                      Button to Press
Image Setup
Phase* Clock*
Too left
Too right
Too low
Too highH. Position
V. Position
Too narrow
Too wide
To correct fl ickering text or lines
Only Analog  Input
Image Setup
Clock
Phase
H.Position
V.Position50
50
50
50
*   See page 20 for SCREEN ADJUSTMENTS.