JBL Sdp5 Manual

SETUPJBL Synthesis
3-12
COMPONENT INCOMPONENT 1 to 3, NONE
Opens the COMPONENT menu shown above, which can be used
to assign a component video input connector for the selected
input. The SDP-5 has eight configurable inputs, each of which can
be assigned to any of its 3 component video input connectors.
Please note the following:
•Composite video output connectors are available when a
composite or S-video source is present.
•S-video output connectors are available when an S-video
source is present....

DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CHL7FILM
%!D5.1 L7FILM
DTS-ES DTS-ES L7FILM
MAIN ADVANCED
ZONE2 IN DIGITAL
dts-ESL7FILM
SETUPSDP-5
3-13
DDD5.1 L7FILM2-CHL7FILM
SELECTING PREFERRED LISTENING MODES
. . . Selecting Preferred Listening Modes continues on page 3-14
CD INPUT SETUP
NAME CD
DIGITAL IN COAX-3
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN COMPOSITE-1
COMPONENT IN NONE
2-CH L7 MUSIC
%!D5.1 L7MUSIC
DTS-ES DTS-ES L7MUSIC
MAIN...

SETUPJBL Synthesis
3-14When the 2-CH parameter is set to USE LAST:
•The SDP-5 will not automatically activate the 2-CHANNEL
listening mode if the remote control 2 CH button was used to
activate the 2-CHANNEL listening mode the last time a
2-channel source was present. Instead, it will activate the
2-channel listening mode (i.e. L7 FILM) that was activated prior
to the 2-CHANNEL listening mode.
•The SDP-5 will automatically activate a dts NEO:6 listening
mode if a dts NEO:6 listening mode was activated...

DOLBY D
Opens the DOLBY D MODE menu shown above, which can be
used to select a preferred listening mode for Dolby Digital input
sources. The SDP-5 automatically activates the selected listening
mode whenever a new input is selected or a new Dolby Digital
source is present. When set to USE LAST, the SDP-5 activates the
listening mode that was activated the last time a Dolby Digital
source was present whenever a new input is selected or a new
Dolby Digital source is present.
&&D
DVD1
INPUTS
SETUP...

SETUPJBL Synthesis
3-16When the dts-ES parameter is set to USE LAST:
•The SDP-5 will automatically activate the dts THX MUSIC
listening mode if this listening mode was activated the last time
a dts(-ES) source was present. However, the dts THX MUSIC
listening mode cannot be selected as the preferred listening
mode for dts(-ES) sources.
dts-ES
Opens the dts-ES MODE menu shown above, which can be used
to select a preferred listening mode for dts(-ES) input sources. The
SDP-5 automatically activates the...

SETUPSDP-5
3-17
CONFIGURING ADVANCED ZONE SETTINGS
MAIN ADVANCED
Selecting the INPUT SETUP menu MAIN ADVANCED option opens
the MAIN ADV menu shown above. The parameters on the left side
of this menu are identical regardless of which input is selected. The
settings on the right side are adjustable. Default parameter settings
differ from input to input. The MAIN ADV menus shown at the
right indicate default parameter settings for each input.
. . . MAIN ADVANCED continues on page 3-18
MAIN...

SETUPJBL Synthesis
3-18
Note:
When the INPUT SELECT parameter is set to AUTO,
the SDP-5 will not select the assigned analog audio
input connector when a valid digital audio input
source is present. Some DVD and CD players output
digital signals (data) when the player is paused or
stopped or when the player is powered on and the
disc drawer is empty. When this occurs, the SDP-5
automatically selects the assigned digital audio input
connector.
INPUT SELECTDIGITAL, ANALOG, AUTO
Controls the interaction of...

SETUPSDP-5
3-19
DIGITALANALOGAUTO
The SDP-5 automatically sets the INPUT
SELECT parameter to DIGITAL when the
ANALOG IN parameter is set to NONE.
•The SDP-5 sends the assigned digital
audio input connector to the Main Zone
audio output connectors. The SDP-5
ignores the assigned analog audio input
connector.
•The digital audio input connectors are
compatible with PCM (44.1, 48, 88.2,
and 96kHz), Dolby Digital, and dts(-ES)
sources. If an incompatible digital audio
source (i.e. MPEG or MP3) is present,...

SETUPJBL Synthesis
3-20
2-CH ANLG BYPON, OFF
Allows 2-channel analog audio input sources to bypass A/D
conversion and internal processing. When set to ON, the SDP-5
passes analog audio input signals to the corresponding Main Zone
audio output connectors. When a 5.1-channel analog audio source
is present, the SDP-5 passes only (L) and (R) analog audio input
signals to the Main Zone audio output connectors labeled Front
L/R. When set to OFF, all analog audio input signals are sent
through A/D conversion...

SETUPSDP-5
3-21
S-VIDEO 16:9AUTO, OFF
Controls the passage of anamorphic trigger signals present in some
video sources. When set to AUTO, the SDP-5 allows anamorphic
video input signals to pass through the S-video switcher, enabling
compatible display devices to automatically switch between
anamorphic and non-anamorphic display modes. When set to OFF,
the SDP-5 prevents anamorphic video input signals from passing
through the S-video switcher, preventing compatible display
devices from automatically...