JBL Sdp5 Manual
Have a look at the manual JBL Sdp5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 57 JBL manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SETUPJBL Synthesis 3-12 COMPONENT INCOMPONENT 1 to 3, NONE Opens the COMPONENT menu shown above, which can be used to assign a component video input connector for the selected input. The SDP-5 has eight configurable inputs, each of which can be assigned to any of its 3 component video input connectors. Please note the following: •Composite video output connectors are available when a composite or S-video source is present. •S-video output connectors are available when an S-video source is present. •Component video output connectors are available when a component video source is present. COMPONENT INDVD1INPUTSSETUP Assigning Audio & Video Input Connectors(continued from page 3-11) DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL COMPONENT IN 1 MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. DVD1 COMPONENT COMPONENT 1 COMPONENT 2 COMPONENT 3 NONE
DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL dts-ESL7FILM SETUPSDP-5 3-13 DDD5.1 L7FILM2-CHL7FILM SELECTING PREFERRED LISTENING MODES . . . Selecting Preferred Listening Modes continues on page 3-14 CD INPUT SETUP NAME CD DIGITAL IN COAX-3 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN COMPOSITE-1 COMPONENT IN NONE 2-CH L7 MUSIC %!D5.1 L7MUSIC DTS-ES DTS-ES L7MUSIC MAIN ADVANCED ZONE2 IN DIGITALThe INPUT SETUP menus include three preferred listening mode selection parameters labeled 2-CH, DOLBY D, and dts-ES. These parameters can be used to select a preferred listening mode for 2-channel, Dolby Digital, and dts(-ES) input sources. The SDP-5 automatically activates the selected listening mode whenever a new input is selected or a new input source is present. For example, the preferred listening mode selection parameters on the DVD1 and CD INPUT SETUP menus are set as shown at the right. •If the DVD1 input is selected and a 2-channel source is present, the SDP-5 activates the L7 FILM listening mode. If a Dolby Digital source becomes present, the SDP-5 automatically activates the 5.1 L7 FILM listening mode. •If the DVD1 input is selected and a dts(-ES) source is present, the SDP-5 activates the dts(-ES) L7 FILM listening mode. If the CD input is selected and a 2-channel source is present, the SDP-5 automatically activates the L7 MUSIC listening mode. The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1
SETUPJBL Synthesis 3-14When the 2-CH parameter is set to USE LAST: •The SDP-5 will not automatically activate the 2-CHANNEL listening mode if the remote control 2 CH button was used to activate the 2-CHANNEL listening mode the last time a 2-channel source was present. Instead, it will activate the 2-channel listening mode (i.e. L7 FILM) that was activated prior to the 2-CHANNEL listening mode. •The SDP-5 will automatically activate a dts NEO:6 listening mode if a dts NEO:6 listening mode was activated the last time a 2-channel source was present. However, the dts NEO:6 listening modes cannot be selected as the preferred listening mode for 2-channel sources. •The SDP-5 will not automatically activate a dts NEO:6 listening mode unless a 44.1 or 48kHz PCM digital source is present. The dts NEO:6 listening modes are not available with 88.2 or 96kHz, Dolby Digital, or analog sources. 2-CH Opens the 2-CH MODE menu shown above, which can be used to select a preferred listening mode for 2-channel input sources. The SDP-5 automatically activates the selected listening mode whenever a new input is selected or a new 2-channel source is present. When set to USE LAST, the SDP-5 activates the listening mode that was activated the last time a 2-channel source was present whenever a new input is selected or a new 2-channel source is present. 2-CHDVD1INPUTSSETUP The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL 2-CHL7FILM MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 Selecting Preferred Listening Modes(continued from page 3-13) DVD1 2-CH MODE L7FILM L7TV L7MUSIC L7MUSIC SURR %!PLII + THX %!PLII MOVIE %!PLII MUSIC %!PRO LOGIC NIGHTCLUB CONCERT HALL CHURCH CATHEDRAL PANORAMA PARTY 2-CHANNEL MONO LOGIC MONO SURROUND MONO USE LAST
DOLBY D Opens the DOLBY D MODE menu shown above, which can be used to select a preferred listening mode for Dolby Digital input sources. The SDP-5 automatically activates the selected listening mode whenever a new input is selected or a new Dolby Digital source is present. When set to USE LAST, the SDP-5 activates the listening mode that was activated the last time a Dolby Digital source was present whenever a new input is selected or a new Dolby Digital source is present. &&DDVD1INPUTSSETUP SETUPSDP-5 3-15 When the DOLBY D parameter is set to USE LAST: •The SDP-5 will automatically activate the 5.1 THX MUSIC listening mode if this listening mode was activated the last time a Dolby Digital source was present. However, the 5.1 THX MUSIC listening mode cannot be selected as the preferred listening mode for Dolby Digital sources. . . . Selecting Preferred Listening Modes continues on page 3-16 DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL DDD5.1 L7FILM MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. DVD1 %!D MODE 5.1 L7FILM 5.1 L7TV 5.1 L7MUSIC 5.1 THX %!DIGITAL 5.1 2-CHANNEL 5.1 MONO LOGIC 5.1 MONO SURR 5.1 MONO USE LAST
SETUPJBL Synthesis 3-16When the dts-ES parameter is set to USE LAST: •The SDP-5 will automatically activate the dts THX MUSIC listening mode if this listening mode was activated the last time a dts(-ES) source was present. However, the dts THX MUSIC listening mode cannot be selected as the preferred listening mode for dts(-ES) sources. dts-ES Opens the dts-ES MODE menu shown above, which can be used to select a preferred listening mode for dts(-ES) input sources. The SDP-5 automatically activates the selected listening mode whenever a new input is selected or a new dts(-ES) source is present. When set to USE LAST, the SDP-5 activates the listening mode that was activated the last time a dts(-ES) source was present whenever a new input is selected or a new dts(-ES) source is present. \DVD1INPUTSSETUP Selecting Preferred Listening Modes(continued from page 3-15) DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL dts-ES dts-ES L7FILM MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. DVD1 DTS-ESMODE DTS-ES L7FILM DTS-ES L7MUSIC DTS-ES THX DTS-ES DTS-ES2-CHAN USE LAST
SETUPSDP-5 3-17 CONFIGURING ADVANCED ZONE SETTINGS MAIN ADVANCED Selecting the INPUT SETUP menu MAIN ADVANCED option opens the MAIN ADV menu shown above. The parameters on the left side of this menu are identical regardless of which input is selected. The settings on the right side are adjustable. Default parameter settings differ from input to input. The MAIN ADV menus shown at the right indicate default parameter settings for each input. . . . MAIN ADVANCED continues on page 3-18 MAIN ADVANCEDDVD1INPUTSSETUP DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL MAIN ADVANCED MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. DVD1 MAIN ADV INPUT SELECT DIGITAL 2-CH ANLG BYP OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF DVD1 MAIN ADV INPUT SELECT DIGITAL 2-CH ANLG BYP OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF DVD2 MAIN ADV INPUT SELECT DIGITAL 2-CH ANLG BYP OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF SAT MAIN ADV INPUT SELECT AUTO 2-CH ANLG BYP OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF VCR MAIN ADV INPUT SELECT ANALOG 2-CH ANLG BYP OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF TV MAIN ADV INPUT SELECT AUTO 2-CH ANLG BYP OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF CD MAIN ADV INPUT SELECT DIGITAL 2-CH ANLG BYP OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF TUNER MAIN ADV INPUT SELECT ANALOG 2-CH ANLG BYP OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF AUX MAIN ADV INPUT SELECT DIGITAL 2-CH ANLG BYP OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF
SETUPJBL Synthesis 3-18 Note: When the INPUT SELECT parameter is set to AUTO, the SDP-5 will not select the assigned analog audio input connector when a valid digital audio input source is present. Some DVD and CD players output digital signals (data) when the player is paused or stopped or when the player is powered on and the disc drawer is empty. When this occurs, the SDP-5 automatically selects the assigned digital audio input connector. INPUT SELECTDIGITAL, ANALOG, AUTO Controls the interaction of the digital and analog audio input connectors assigned for the selected Main Zone input. The INPUT SETUP menu can be used to assign one digital and one analog audio input connector for the selected input. Refer to pages 3-7 and 3-8 for more information. When the Shift command bank is activated, the remote control 7/5 button can be used to adjust the INPUT SELECT parameter, cycling through the DIGITAL, ANALOG, and AUTO settings. The table shown on the next page describes INPUT SELECT parameter settings. INPUT SELECTMAIN ADVANCEDDVD1INPUTSSETUP MAIN ADVANCED (continued from page 3-17) DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL MAIN ADVANCED MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. DVD1 MAIN ADV INPUT SELECT DIGITAL 2-CH ANLG BYP OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF INPUT SELECT DIGITALDIGITAL ANALOG AUTO
SETUPSDP-5 3-19 DIGITALANALOGAUTO The SDP-5 automatically sets the INPUT SELECT parameter to DIGITAL when the ANALOG IN parameter is set to NONE. •The SDP-5 sends the assigned digital audio input connector to the Main Zone audio output connectors. The SDP-5 ignores the assigned analog audio input connector. •The digital audio input connectors are compatible with PCM (44.1, 48, 88.2, and 96kHz), Dolby Digital, and dts(-ES) sources. If an incompatible digital audio source (i.e. MPEG or MP3) is present, the SDP-5 automatically selects the assigned analog audio input connector. •The DIGITAL IN parameter (3-7) can be used to assign a digital audio input connector for the selected input.The SDP-5 automatically sets the INPUT SELECT parameter to ANALOG when the DIGITAL IN parameter is set to NONE. •The SDP-5 sends the assigned analog audio input connector to the Main Zone audio output connectors. The SDP-5 ignores the assigned digital audio input connector. •The ANALOG IN parameter (3-8) can be used to assign an analog audio input connector for the selected input.The SDP-5 automatically sets the INPUT SELECT parameter to AUTO when both digital and analog audio input connectors are assigned. •The SDP-5 toggles between sending the assigned digital and analog audio input connectors to the Main Zone audio output connectors based on the input source that is present. For example: –When a 2-channel PCM, Dolby Digital, or dts(-ES) source is present, the SDP-5 automatically selects the assigned digital audio input connector. –When an SACD source is present, the SDP-5 automatically selects the assignedanalog audio input connector. •The AUTO setting is recommended for components that generate both digital and analog signals, such as DVD/SACD players. INPUT SELECT Parameter Settings The table below describes INPUT SELECT parameter settings. . . . MAIN ADVANCED continues on page 3-20
SETUPJBL Synthesis 3-20 2-CH ANLG BYPON, OFF Allows 2-channel analog audio input sources to bypass A/D conversion and internal processing. When set to ON, the SDP-5 passes analog audio input signals to the corresponding Main Zone audio output connectors. When a 5.1-channel analog audio source is present, the SDP-5 passes only (L) and (R) analog audio input signals to the Main Zone audio output connectors labeled Front L/R. When set to OFF, all analog audio input signals are sent through A/D conversion and internal processing before passing to the Main Zone audio output connectors. Note: When the Shift command bank is activated, pressing the remote control 2 CH button toggles the 2-CH ANLG BYP parameter setting ON and OFF. 2-CH ANLG BYPMAIN ADVANCEDDVD1INPUTSSETUP MAIN ADVANCED (continued from page 3-19) DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL MAIN ADVANCED MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. DVD1 MAIN ADV INPUT SELECT DIGITAL ANALOG BYPASS OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF 2-CH ANLG BYP OFF ON OFF
SETUPSDP-5 3-21 S-VIDEO 16:9AUTO, OFF Controls the passage of anamorphic trigger signals present in some video sources. When set to AUTO, the SDP-5 allows anamorphic video input signals to pass through the S-video switcher, enabling compatible display devices to automatically switch between anamorphic and non-anamorphic display modes. When set to OFF, the SDP-5 prevents anamorphic video input signals from passing through the S-video switcher, preventing compatible display devices from automatically switching between anamorphic and non-anamorphic display modes. . . . MAIN ADVANCED continues on page 3-22 S-VIDEO 16:9MAIN ADVANCEDDVD1INPUTSSETUP DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL MAIN ADVANCED MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. DVD1 MAIN ADV INPUT SELECT DIGITAL 2-CH ANLG BYP OFF S-VIDEO 16:9 AUTO S-VIDEO OSD 4:3 ON COMPONENT OSD OFF S-VIDEO 16:9 AUTO AUTO OFF