Kodak Professional 6800 User Manual

Calibrating the Printer
3-7
22.Click OK to close the dialog box.
23.Click Print.
The information is processed and the calibration test print is printed 
on the specified printer. Processing may take several minutes.
The following dialog box appears.
24.Look at the test print and determine which cluster appears the most 
neutral (has the least amount of color).
25.Enter the number of the most neutral cluster in the Cluster Number box. 
(in a range from 201-249)
26.Click Done.
The printer calibration...

 3-8 Calibrating the Printer
Uninstalling the Calibration Software
You can remove the calibration software from your computer in two ways:
 Select Start > Programs > KODAK Calibration Utility > 
Uninstall KODAK Calibration Utility and follow the directions to 
uninstall the software.
 Select Start > Settings > Control Panel > Add/Remove Programs 
>KODAK Calibration Utility and follow the directions to remove the 
software.
Resolving Calibration Error Messages
Refer to the following table to resolve...

Calibrating the Printer
3-9
Cannot open the USB port. 
Please check the printer 
cables and power.The software is unable to 
communicate with the printer. Check that the printer cables are secure.
 Check that the printer is turned on and the 
operator panel Ready light is illuminated. 
 Power the printer off then on.
 Reboot your computer.
Cannot access the file or read 
the data.A file required by the calibration 
software is missing or corrupt.Uninstall then reinstall the calibration 
software. See...

 3-10 Calibrating the Printer
The printer is initializing. The printer is not ready for 
calibration. Wait a few minutes until the operator 
panel Ready light is illuminated.
 If this message continues to occur, power 
the printer off and then on.
Paper error. The paper is empty or not loaded. Load the paper. See “Loading the Paper” on 
page 1-8.
Paper empty. The paper is empty. Reload the paper. See “Loading the Paper” 
on page 1-8.
Ribbon empty. The ribbon is empty. Reload the ribbon. See “Loading...

4-1
4Operating the Printer
Making Prints
You make prints using photo printing software applications. For 
application-specific printing information, see the user’s guide or online Help 
for the software application.
Handling and Storing Prints
For best results:
 Make sure hands are clean and free of food, oil, and grease.
 Store prints in a cool, dry environment free of chemical contamination.
 Store prints at temperatures below 72° F (25° C) for extended periods.
 Store prints at a relative humidity...

 4-2 Operating the Printer
Using Setup Mode to Review Printer Settings
Use the operator panel to review printer settings in Setup mode.
Accessing the Printer 
SettingsPress Menu repeatedly to scroll through the printer settings in the following 
order. 
Menu AdvancePaper
EnterPaper
Rewind/Clear Error Ready Power
Photo Printer 6800Kodak
1. Press Menu to enter Setup Mode.
2. Press Menu repeatedly to scroll
through the printer settings.
Printer settings
are displayed here
3. Press +/- to scroll through...

5-1
5Maintaining the Printer
To ensure good printer performance and high-quality prints, keep the printer 
and its environment clean and dust-free.
Cleaning the Cabinet
Clean the exterior cabinet and filter openings regularly to eliminate dust 
build-up and to prevent dirt from entering the printer.
CAUTION:
Never use abrasives or harsh chemicals to clean any part of the 
printer. Do not allow any foreign objects or liquids to fall or 
spill inside the printer. Fire or electric shock could result. If...

 5-2 Maintaining the Printer
In the United States for health, safety, and environment information, call 
585-722-5151. Customers outside the U.S. can contact their local KODAK 
Customer Service representative.
Cleaning the Thermal 
Head and Stripper 
Plate
CAUTION:
Fingerprints can damage the thermal head, which looks like a 
glass bar. Never touch it with your bare hands or fingers.
1.Make sure the power switch is turned off ( ).
2.Slide the cover release toward you, then open the upper cover...

Maintaining the Printer
5-3
Cleaning the Platen 
Roller
1.Remove an alcohol pad from its packaging. Wipe the rubber section of 
the platen roller with the pad.
2.Rotate the roller to clean the entire surface.
3.Allow the alcohol to dry completely (about five minutes) before you 
resume printing.
Cleaning the Cleaning 
RollersIt is essential to keep the cleaning rollers clean to prevent dirt from 
transferring back onto the prints and keep the printer operating correctly. 
IMPORTANT: There are two...

 5-4 Maintaining the Printer
5.Close the upper cover by pressing on the center of the cover until it 
clicks in place.
6.Allow the alcohol to dry completely (about five minutes) before you 
resume printing.
Downloaded From ManualsPrinter.com Manuals