Konica Minolta bizhub 190f User Manual

							Layout and installation3
bizhub 131f/190f 3-25
3.6.2 Local install: Windows USB port
2
Note
A USB interface will only operate on Windows 98SE, Windows Me, Win-
dows 2000 and Windows XP, Windows Server 2003 and Windows Vista. 
Windows 98 and Windows NT 4.0 do not support USB.
For Windows 2000/XP/Server 2003/Vista, you need to log on as an ad-
ministrator.
If you have previously installed the KONICA MINOLTA 131f/190f driver, 
you will first have to uninstall it (see page 3-37.)
1Turn on your computer, but do not connect your machine to the USB 
port yet.
2Insert the supplied CD into your CD-ROM drive.
2
Note
For Windows Vista users:
If the AutoPlay dialogue box appears, click [Run Setup.ses]. When the 
User Account Control dialogue box appears, click [Allow] to allow the 
driver software installation.
If this window does not appear, run the setup.exe located on the root di-
rectory of the supplied CD-ROM.
3Choose your language, then click [OK].
4On the next window, click [Next].
5When the Software License Agreement window appears, after read-
ing and accepting the License Agreement click [Yes].
Downloaded From ManualsPrinter.com Manuals 
						

							3Layout and installation
3-26 bizhub 131f/190f
6Select your machine and click [Next].
7Select the USB.
8Click [Next].
9Click [Next].
10Click [Next] to start installing on your computer.
2
Note
For Windows Vista users:
During the driver installation, the Windows Security dialogue box will 
appear two times.  Click [Install this driver software anyway].
11When the following window appears, click [Finish] to complete installa-
tion.
If an error message appears during the installation process, or if you have 
previously installed the KONICA MINOLTA 131f/190f driver, you will first 
have to uninstall it. (See page 3-37.)
-Windows 98SE and Windows Me users % Go to next page.
-Windows 2000 professional users % Go to page 3-30.
-Windows XP/Server 2003 users % Go to page 3-32
-Windows Vista users % Go to page 3-34.
Downloaded From ManualsPrinter.com Manuals 
						

							Layout and installation3
bizhub 131f/190f 3-27For Windows 98SE and Windows Me users
2
Note
Make sure that you followed the installation steps 1 to 11 described on 
“Local install: Windows USB port” on page 3-25.
1Plug the USB cable to your machine and then connect it to your com-
puter.
2
Note
Be sure to use a shielded USB cable. Use of an unshielded cable may re-
sult in radio interference.
2Turn on your machine and computer.
2
Note
The following wizard images are based on Windows Me.
Downloaded From ManualsPrinter.com Manuals 
						

							3Layout and installation
3-28 bizhub 131f/190f
3The Add New Hardware Wizard will appear.
In Windows Me, select Specify the location of the driver (Advanced) 
and click [Next].
In Windows 98SE, click [Next].  Then select Search for the best driver 
for your device.(Recommended) and click [Next].
4In Windows ME, select Search for the best driver for your device and 
Specify a location.
In Windows 98SE, select Specify a location and clear any other 
choices.
5Click [Browse] to navigate your hard disk: C:\KONICA_MINOLTA_131f/
190f_GDI, and then click [OK].
6Follow the instructions that appears on the window until you can click 
[Finish].
7The Add New Hardware Wizard appears again. Repeat the same pro-
cedures from steps 3 to 6 three more times until the installation is com-
pletely finished.
After the driver installation, you need to configure the Device Option 
setting to activate either or both the 2nd Paper Cassette or/and Duplex 
Unit. (The Duplex Unit is available only for bizhub 190f.) See Activating 
your device option(s) on the next page for instructions on how to do 
this.
Downloaded From ManualsPrinter.com Manuals 
						

							Layout and installation3
bizhub 131f/190f 3-29Activating your device option(s)
If your machine has device options, you must open the printer properties and 
activate them.
To activate the device option(s):
1Click [Start] % [Settings] % [Printers].
2Right click the KONICA MINOLTA GDI printer icon, then click [Proper-
ties].
3Click the [Device Option] tab.
4Select the device(s) installed on your machine.
5Click [OK], then close the printer properties. 
2
Note
The duplex unit is available only for bizhub 190f.
Downloaded From ManualsPrinter.com Manuals 
						

							3Layout and installation
3-30 bizhub 131f/190fFor Windows 2000 professional users
2
Note
Make sure that you followed the installation steps 1 to 11 described on 
“Local install: Windows USB port” on page 3-25.
1Plug the USB cable to your machine and then connect it to your com-
puter.
2
Note
Be sure to use a shielded USB cable. Use of an unshielded cable may re-
sult in radio interference.
2Turn your machine on.
3The Found New Hardware Wizard will appear. Click [Next].
4Select Search for a suitable driver for my device and click [Next].
5Select Specify a location and clear any other choices, then click 
[Next].
6Click [Browse] to navigate your hard disk: C:\KONICA_MINOLTA_131f/
190f_GDI, and then click [OK].
7Click [Next]. If the Digital Signature Not Found dialogue box appear, 
click [Yes] to install the driver.
Downloaded From ManualsPrinter.com Manuals 
						

							Layout and installation3
bizhub 131f/190f 3-31
8The Found New Hardware Wizard appears again. Repeat the same 
procedures from steps 12 to 16.
9Click [Finish].
The driver installation is completed.
Activating your device option(s)
If your machine has device options, you must open the printing preferences 
and activate them.
To activate the device option(s):
1Click [Start] % [Settings] % [Printers].
2Right click the KONICA MINOLTA GDI printer icon, then click [Printing 
Preference].
3Click the [Device Option] tab.
4Select the device(s) installed on your machine.
5Click [OK], then close the printing preferences.
2
Note
The duplex unit is available only for bizhub 190f.
Downloaded From ManualsPrinter.com Manuals 
						

							3Layout and installation
3-32 bizhub 131f/190fFor Windows XP/Server 2003 users
2
Note
Make sure that you followed the installation steps 1 to 11 described on 
“Local install: Windows USB port” on page 3-25.
1Plug the USB cable to your machine and then connect it to your com-
puter.
2
Note
Be sure to use a shielded USB cable. Use of an unshielded cable may re-
sult in radio interference.
2Turn your machine on.
3The Found New Hardware Wizard will appear. Click [Next].
4Select Install from a list or specific location and click [Next].
5Select Include this location in the search and clear any other choices. 
Click [Browse] to navigate your hard disk: C:\KONICA_MINOLTA_131f/
190f_GDI, and then click [OK].
6Click [Next].
7If the Windows Logo testing dialogue box appear, click [Continue An-
yway] to install the driver.
8Click [Finish].
Downloaded From ManualsPrinter.com Manuals 
						

							Layout and installation3
bizhub 131f/190f 3-33
9The Found New Hardware Wizard for other device of KONICA MI-
NOLTA 131f/190f will appear, repeat same procedures from steps 4 to 
8.
10Click [Finish].
The driver installation is completed.
Downloaded From ManualsPrinter.com Manuals 
						

							3Layout and installation
3-34 bizhub 131f/190fActivating your device option(s)
If your machine has device options, you must open the printing preferences 
and activate them.
To activate the optional device:
1Click [Start] % [Settings] % [Printers].
2Right click the KONICA MINOLTA 131f/190f printer icon, then click 
[Printing Preferences].
3Click the [Device Option] tab.
4Select the device(s) installed on your machine.
5Click [OK], then close the printer properties.
2
Note
The duplex unit is available only for bizhub 190f.
For Windows Vista users
2
Note
Make sure that you followed the installation steps 1 to 11 described on 
“Local install: Windows USB port” on page 3-25.
1Plug the USB cable into your machine and then connect it to your com-
puter.
Downloaded From ManualsPrinter.com Manuals