Konica Minolta magicolor 1600W User Manual

Selecting Printer Driver Defaults 2-2
Selecting Printer Driver Defaults
Before you start working with your Printer, you are advised to verify and 
change the default printer driver settings if necessary.
1Choose the driver’s properties as follows:
–(Windows Vista) 
From the Start menu, select Control Panel, and then click Hardware 
and Sound to select Printers. Right-click the KONICA MINOLTA 
magicolor 1600W printer icon, and then select Printing Preferences.
–(Windows XP/Server 2003) 
From the start...

Uninstalling the Printer Driver2-3
Uninstalling the Printer Driver
This section describes how to uninstall the printer driver if necessary.
You must have administrator privileges in order to uninstall the printer 
drive.
If the User Account Control window appears when uninstalling on Win-
dows Vista, click the Allow button or the Continue button.
Windows Vista/XP/Server 2003/2000
1Close all applications.
2Choose Uninstall Program as follows:
–(Windows Vista/XP/Server 2003) 
From the Start menu, choose...

Displaying Printer Driver Settings 2-4
Windows 2000
1From the Start menu, select Settings, and then click Printers to display 
the Printers directory.
2Right-click the KONICA MINOLTA magicolor 1600W printer icon and 
select Printing Preferences.
Downloaded From ManualsPrinter.com Manuals 

Printer Driver Settings2-5
Printer Driver Settings
Common Buttons
The buttons described below appear on each tab.
„OK
Click to exit the Properties dialog box, saving any changes made.
„Cancel
Click to exit the Properties dialog box without saving any changes made.
„Apply
Click to save all changes without exiting the Properties dialog box.
„Help
Click to view the help.
„Easy Set
Click Save to save the current settings. Specify a Name and Comment to 
access the settings for use again later.
Name: Type in...

Printer Driver Settings 2-6
When this button is clicked, it changes to the Printer View button.
This button appears only when the Watermark tab is selected.
„Quality View
Click the button to display a sample of the settings selected in the Quality tab.
When this button is clicked, it changes to the Printer View button.
This button appears only when the Quality tab is selected.
„Default
Click the button to reset the settings to their defaults.
This button does not appear on the Version tab.
When this...

Printer Driver Settings2-7
Overlay Tab
Be sure to use overlays with print jobs with a media size and orienta-
tion that matches the overlay form. 
In addition, if settings have been specified for “N-up” in the printer 
driver, the overlay form cannot be adjusted to match the specified set
-
tings.
The Overlay Tab allows you to
„Select the form Overlay to use
„Add, edit or delete overlay files
„Print the form on all pages or only the first page
Watermark Tab
The Watermark Tab allows you to
„Select the...

Printer Driver Settings 2-8
Downloaded From ManualsPrinter.com Manuals 

Remote Panel 
Utility
Downloaded From ManualsPrinter.com Manuals 

Working with the Remote Panel Utility 3-2
Working with the Remote Panel Utility
Introduction
The Remote Panel Utility shows information about the current status of the 
printer and allows you to specify various settings such as the time until the 
printer enters Energy Save mode.
In order to use the Remote Panel Utility, install it after installing the 
printer driver.
Opening the Remote Panel Utility
Follow the procedure described below to start up the Remote Panel Utility.
1Double-click the file...

Working with the Remote Panel Utility3-3
zChange Toner: Used when replacing a toner cartridge. 
Select this mode, and then click the Rotate 
Toner button to switch the printer to the Change 
Toner mode.
(Refer to “Replacing a Toner Cartridge” on page 5-5.)
zEject All Toner: Used when replacing all toner cartridges at the 
same time.
 
Select this mode, and then click the Rotate 
Toner button to switch the printer to the Eject All 
Toner mode.
(Refer to “Replacing All Toner Cartridges at the Same Time” on...