Kyocera KM 3060 User Manual

							
Basic Operation 
OPERATION GUIDE3-15
3
2Press [Standard Zoom] to use Auto Zoom.
Press [+] or [–] to change the displayed magnification as desired. You can 
also enter the magnification directly  using the numeric keys by pressing [# 
Keys].
When using Preset 
Zoom, select the key 
of desired 
magnification.
When using XY 
Zoom, press [XY 
Zoom].
Press [+] or [–] to 
change the 
displayed 
magnifications of X 
(horizontal) and Y (vertical). You can al so enter the magnification directly 
using the numeric keys by pressing [# Keys].
Press [Original 
Orientation] to select 
orientation of the 
originals, either [Top 
Edge Top] or [Top 
Edge Left]. Then 
press [OK].
3Press [OK].
4Press the  Start key. Copying begins.
Status 10/10/2007    10:1 0
Ready to copy .Copies
Cancel OK
Zoom
Press [ OK] to  display
A dd Shor t c ut(25 - 400 )
St andar d
Zoom
X Y  Zoom
1
129% 400%
100 %
Auto
200%
121% 154%
# Keys
50% 78%
77%
25% 64%
Letter
>>Ledger Max .
ST MT
>>Ledger
Legal
>>Ledger ST MT
>>Legal L edger
>>STMT Legal
>>Letter
L edger
>>Legal
Min . L edger
>>Letter
the image .
Status
10/10/2007    10:1 0
Ready to copy .Copies
Cancel OK
Zoom
Press [ OK] to  display
A dd Shor t c utX
St andar d
Zoom
X Y  Zoom %
(25 - 400 )
Y (25 - 400 ) %
# Keys
# Keys
T op Edge T op
Original
Orientation
1
the image .
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation 
3-16OPERATION GUIDE
Duplex Copying
Produce two-sided copies. The following duplex options are available.
One-sided to Two-sided
Produces two-sided copies from one-sided originals. In case of an odd 
number of originals, the back side of the last copy will be blank.
The following binding options are available.
A Original Left/Right to Binding Left/Right: Images on the second sides 
are not rotated.
B Original Left/Right to Binding Top: Images on the second sides are 
rotated 180°. Copies can be bound on the top edge, facing the same 
orientation when turning the pages.
Two-sided to One-sided
Copies each side of a two-sided original onto two individual sheets. The 
optional document processor is required.
The following binding options are available.
•Binding Left/Right: Images on the second sides are not rotated.
•Binding Top: Images on the second sides are rotated 180º.
Original Copy
5
4
3
2
1
5
34
12
ghidefabc
ghiabcdef
ghiabc
def
Original CopyAB
2112
Original Copy
Downloaded From ManualsPrinter.com Manuals 
						

							
Basic Operation 
OPERATION GUIDE3-17
3
Two-sided to Two-sided
Produces two-sided copies from two-sided originals. The optional 
document processor is required.
NOTE: The paper sizes supported in Two-sided to Two-sided are Ledger, 
Legal, Letter, Letter-R, Executive, St atement-R, Oficio II, 8.5×13.5, A3, 
B4, A4, A4-R, B5, B5 -R, A5-R and Folio.
Book to One-sided Produces a 1-sided copy of a 2-sided or open book original.
The following binding options are available.
•Binding Left : Originals with facing pages are copied from left to right.
• Binding Right : Originals with facing pages are copied from right to 
left.
NOTE: The following sizes of originals and paper are supported in Two-
sided to One-sided and Book to One-sided. Original: Ledger, Letter-R, A3, 
B4, A4-R, B5-R, A5-R and 8K. Paper:  Letter, A4, B5 and 16K. You may 
change paper size and reduce or enlarge copy to match that size.
Original Copy
53412
53412
2121
Original Copy
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation 
3-18OPERATION GUIDE Book to Two-sided
Produces two-sided copies from an open book original with facing pages.
NOTE: The sizes of originals and paper supported in Book to Two-sided 
are Letter, A4, B5, and 16K.
The procedure for using two-sided/duplex copying is explained below.
1Press [Layout/Edit] 
and then [Duplex].
2Select the desired 
Duplex option.
3If you choose [2-sided>>2-sided], [2-sided>>1-sided], [Book>>1-sided] or 
[Book>>2-sided], select the binding edge of the originals of Original.
4If you choose [1-sided>>2-sided], [2-sided>>2-sided] or [Book>>2-sided], 
select the binding edge of the finished copies of Finishing.
5Press [Original Orientation] to select orientation of the originals, either [Top 
Edge Top] or [Top Edge Left]. Then press [OK].
34
34
34
21
2 1
43
12
12
1023
2130
Original Copy
Status10/10/2007    10:1 0
Image
Quality Set Original.Copy Image
Org./Paper /
Finis hing Quick Setup Layout /Edit Advanced
Set up Copies
1
Original
Zoom
Paper100 %
-- - :
:
:-- -Zoom C om bi ne Mar gi n /
CenteringBorder Erase
B ookl et Dupl ex C over
Page # Mem o PageForm
Overlay
Ready to copy .
Pr ev i ew
Status10/10/2007    10:1 0
Ready to copy .Copies
Cancel OK Dupl ex
Press [OK] to  display
A dd Shor t c ut B ook
>>2 -sided 1- s i ded
>>2 -sided
T op Edge T op
Original
Orientation 1- s i ded
>>1 -sided
2- s i ded
>>2 -sidedFinis hing
Binding
Lef t/RightBinding
Top 2- s i ded
>>1 -sided
B ook
>>1 -sided
1
t he im age.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation 
OPERATION GUIDE3-19
3
6Press [OK].
7Place the original and press the Start key.
Once an original placed on the platen is scanned, replace it with the next 
one. Then, press the Start key.
After scanning all originals, press [Scan finish] to start copying.
Collate/Offset Copying
The machine can collate and offset at the same time as it copies. 
You can use the Collate/Offset copy function for tasks such as those 
shown below.
Collate
Scan multiple originals and 
deliver complete sets of copies 
as required according to page 
number.
Offset
Use offset to produce copies 
after rotating each set (or 
page) by 90º.
NOTE: To use the offset function, load the same sized paper with 
different orientation in the paper source other than the selected paper 
source.
The paper sizes supported in Offset are A4, B5, Letter and 16K.
The procedure for using collate/offset copying is explained below.
3
2
1
321321321
Original Copy
3
2
1
321
321
321
Original Copy
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation 
3-20OPERATION GUIDE
1Press [Org./Paper/
Finishing] and then 
[Collate/Offset].
2To use collate 
copying, press [On] 
of Collate.
To use offset 
copying, press 
[Each Set] of Offset.
Press [OK].
3If [Off] is selected for 
Collate, press [Off] 
or [Each Page] in 
Offset.
4Press [OK].
5Use the numeric keys to enter the copy quantity.
6Place the originals and press the Start key. Copying begins.
Status10/10/2007    10:1 0
Image
Quality Set Original.Copy Image
Org./Paper /
Finis hing Quick Setup Layout /Edit Advanced
Set up Original
Si z eCopies
Paper
SelectionMixed Siz ed
OriginalsOriginal
Orientation
Collate/
OffsetSt aple O ut put  T ray
1
Original
Zoom
Paper100 %
-- - :
:
:-- -
Ready to copy .
Pr ev i ew
Status10/10/2007    10:1 0
Ready to copy .Copies
Cancel OK Collate/Offset
Press [OK] to  display
A dd Shor t c utOffEac h Set OffOn Collate
Offset
1
t he im age.
Status10/10/2007    10:1 0
Ready to copy .Copies
Cancel OK Collate/Offset
Press [ OK] to  display
A dd Shor t c utOffEac h Page OffOn Collate
Offset
1
the image .
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation 
OPERATION GUIDE3-21
3
Reserve Copy
This function allows you to reserve the next copy job during printing.
Using this function, the original will be scanned while the machine is 
printing.
When the current print job ends, the reserved copy job is printed.
The procedure differs depending on the Reserve Next Priority Settings.
If Reserve Next Priority Setting is set to On
The Copy function default screen appears on the touch panel during 
printing.
1Place the originals 
onto the machine for 
reserving copy, and 
configure the copy 
settings.
2Press the Start key.
The machine starts scanning the originals.
When the current print job ends, the reserved copy job is printed.
If Reserve Next Priority Setting is set to Off
The Copying screen appears on the touch panel during printing. 
1Press [Reserve 
Next].
The default screen 
for copying appears.
2Place the originals onto the machine for reserving copy, and configure the 
copy settings.
3Press the Start key.
The machine starts scanning the originals.
When the current print job ends, the reserved copy job is printed.
Status10/10/2007    10:1 0
Original
Zoom
Paper100 %
-- - :
:
:-- -
Image
Quality
Ready to copy .
Set Original.Copies
Copy Image
Org./Paper /
Finis hing Quick Setup Layout /Edit Advanced
Set up
1
Normal 0 Letter
Zoom Dens i t y Paper
Selection
1- s i ded
>>1-sidedText+Photo Collate
Duplex Original
ImageCollate/
Offset Auto
Pl ai n
Pr ev i ewInterrupt
C anc el Res erve Next Interrupt
St at us10/10/2006    10:10
Copying...Copies
Sc anner Set t i ng
24
Copies Printer Setting
Collate
Top Tray Top Edge Top 100 %Original Pages Job No .: Job Nam e : Us er Nam e :000021 doc 200 60505113414-----
2-sided
2- s i ded
2
A4 Plain A4
24 2/
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation 
3-22OPERATION GUIDE
Interrupt Copy
This function allows you to pause the current jobs in progress when you 
need to make copies immediately.
When interruption copy ends, the machine resumes the paused print jobs.
The procedure differs depending on the Reserve Next Priority Settings.
If Reserve Next Priority Setting is set to On
The Copy function default screen appears on the touch panel during 
printing. 
1Press [Interrupt].
Ready to interrupt 
copy. is displayed.
The current print job 
is temporarily 
interrupted.
2Place the originals onto the machine for interrupt copy, and configure the 
copy settings.
3Press the Start key to start interrupt copying.
4When interrupt copying ends, press [Interrupt].
The machine resumes the paused print jobs.
NOTE: If the machine is left for 60 seconds, interrupt copying is 
automatically cancelled and printing resumes.
If you press [Interrupt] while specifying copy settings, the settings are 
automatically reset and returns to the default setting.
Status10/10/2007    10:1 0
Original
Zoom
Paper100 %
-- - :
:
:-- -
Image
Quality
Ready to copy .
Set Original.Copies
Copy Image
Org./Paper /
Finis hing Quick Setup Layout /Edit Advanced
Set up
1
Normal 0 Letter
Zoom Dens i t y Paper
Selection
1- s i ded
>>1-sidedText+Photo Collate
Duplex Original
ImageCollate/
Offset Auto
Pl ai n
Pr ev i ewInterrupt
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation 
OPERATION GUIDE3-23
3
If Reserve Next Priority Setting is set to Off
The Copying screen appears on the touch panel during printing.
1Press [Interrupt].
The current print job 
is temporarily 
interrupted.
2Place the originals onto the machine for interrupt copy, and configure the 
copy settings.
3Press the Start key to start interrupt copying.
4When interrupt copying ends, press [Interrupt].
The machine resumes the paused print jobs.
NOTE: If the machine is left for 60 seconds, interrupt copying is 
automatically cancelled and printing resumes.
C anc el Res erve Next Interrupt
St at us10/10/2006    10:10
Copying...Copies
Sc anner Set t i ng
24
Copies Printer Setting
Collate
Top Tray Top Edge Top 100 %Original Pages Job No .: Job Nam e : Us er Nam e :000021 doc 200 60505113414-----
2-sided
2- s i ded
2
A4 Plain A4
24 2/
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation 
3-24OPERATION GUIDE
Printing - Printing from Applications
Follow the steps below to print documents from applications.
NOTE: To print the document from applications, install the printer driver 
on your computer from the supplied CD-ROM (Product Library). 
1Create a document using an application.
2Click File and select Print in the application. The Print dialog box appears.
3Click the T button 
next to the Name 
field and select this 
machine from the 
list.
4Enter the desired print quantity in the Number of copies box. Enter any 
number up to 999.
When there is more than one document, select Collate to print out one by 
one in the sequence of the page numbers.
5Click Properties button. The Properties dialog box appears.
6Select the Basic tab and click Page Size button to select the paper size.
Downloaded From ManualsPrinter.com Manuals