Kyocera KM 8030 User Manual

							xix
SAFETY OF LASER BEAM (USA)
1. Safety of laser beam
This copier has been certified by the manufacturer to Class 1 level under the radiation 
performance standards established by the U.S.DHHS (Department of Health and Human 
Services) in 1968. This indicates that the product is safe to use during normal operation and 
maintenance. The laser optical system, enclosed in a protective housing and sealed within the 
external covers, never permits the laser beam to escape.
2. The CDRH Act
A laser-product-related act was implemented on Aug. 2, 1976, by the Center for Devices and 
Radiological Health (CDRH) of the U.S. Food and Drug Administration (FDA). This act prohibits 
the sale of laser products in the U.S. without certification, and applies to laser products 
manufactured after Aug. 1, 1976. The label shown below indicates compliance with the CDRH 
regulations and must be attached to laser products marketed in the United States. On this 
copier, the label is on the left.
3. Optical unit
When checking the optical unit, avoid direct exposure to the laser beam, which is invisible. 
Shown at below is the label located on the cover of the optical unit.
4. Maintenance
For safety of the service personnel, follow the maintenance instructions in the other section of 
this manual.
5. Safety switch
The power to the laser unit is cut off when the upper front cover is opened.
Downloaded From ManualsPrinter.com Manuals 
						

							xx
Safety Instructions Regarding the Disconnection of Power
Caution: The power plug is the main isolation device! Other switches on the equipment are only 
functional switches and are not suitable for isolating the equipment from the power source.
Attention: Le débranchement de la fiche secteur est le seul moyen de mettre l’appareil hors 
tension. Les interrupteurs sur l’appareil ne sont que des interrupteurs de fonctionnement: ils ne 
mettent pas l’appareil hors tension.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION — The changes or modifications not expressly approved by the party responsible for compliance 
could void the user’s authority to operate the equipment.
* The above warning is valid only in the United States of America.
MERCURY WARNING
THE LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR 
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
Downloaded From ManualsPrinter.com Manuals 
						

							xxi
Warranty (USA)
NEW 6030/8030 COPIER LIMITED WARRANTY
1. Kyocera Mita America, Inc. and Kyocera Mita Canada, Ltd. (both referred to as “Kyocera”)
warrant the Customer’s new 6030/8030 copier, and the new accessories installed with the initial
installation of the copier, against any defects in material and workmanship for a period of one (1)
year from date of installation by an Authorized Kyocera Dealer, or 500,000 copies/prints,
whichever first occurs. In the event the copier or an accessory is found to be defective within the
warranty period, Kyocera’s only obligation and the Customer’s exclusive remedy shall be
replacement of any defective parts. It is understood that Kyocera shall have no obligation to
furnish labor.
2. This warranty is valid only as to the original retail purchaser (referred to as the “Customer”) of a
new Kyocera copier in the United States of America, or Canada based upon the country of
purchase.
3. In order to obtain performance of this warranty, the Customer must immediately notify the
Authorized Kyocera Dealer from whom the product was purchased. If the Kyocera Dealer is not
able to provide service, write to Kyocera at the address below for the name and address of the
Authorized Kyocera Dealer in your area or check our website at www.kyoceramita.com.
4. This warranty does not cover copiers or accessories: (a) which have become damaged due to
operator negligence, misuse, accidents, improper storage or unusual physical or electrical
stress, (b) which have used parts or supplies which are not genuine Kyocera brand parts or
supplies, (c) which have been serviced by a technician not employed by Kyocera or an
Authorized Kyocera Dealer, or (d) which have had the serial number modified, altered, or
removed.
5. This warranty does not cover Maintenance Kits, the components of Maintenance Kits, or
Photoconductor Drums. Kyocera Maintenance Kits and Photoconductor Drums have separate
warranties.
6. This warranty gives the Customer specific legal rights. The Customer may also have other
rights, which vary from state to state, or province to province. Neither the seller, nor any other
person is authorized to extend the time period, or expand this warranty on behalf of Kyocera.
7. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES AND (CONDITIONS),
EXPRESS OR IMPLIED, AND KYOCERA SPECIFICALLY DISCLAIMS ANY IMPLIED
WARRANTY (OR CONDITION) OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY SHALL NOT EXTEND TO, AND KYOCERA SHALL NOT BE
LIABLE FOR, ANY INCIDENTAL OR CONSEQUENTAL DAMAGES WHICH MAY ARISE OUT
OF THE USE, OR INABILITY TO USE, THE COPIER.
Downloaded From ManualsPrinter.com Manuals 
						

							xxii
Downloaded From ManualsPrinter.com Manuals 
						

							xxiii
Introduction
This Operation Guide contains the following chapters:
1Part Names
Identifies copier parts and operation panel keys.
2 Preparing to Copy
Explains how to load paper and originals.
3 Basic Operation
Describes the procedures for basic copying.
4 Optional Equipment
Introduces the convenient optional equipment available for this copier.
5 Maintenance
Describes cleaning and toner replacement.
6 Troubleshooting
Explains how to handle error messages, paper jams, and other problems.
Appendix
Lists the copier specifications.
Downloaded From ManualsPrinter.com Manuals 
						

							xxiv
Guides Included
The following guides are included with this copier. Refer to the proper guide for your needs.
Operation Guide (This Guide)
Describes how to load paper, basic copier operations, and troubleshooting.
Advanced Operation Guide
Covers copying details in depth as well as default settings.
Conventions in This Guide
The following conventions are used depending on the nature of the description.
Convention Description Example
BoldIndicates operation panel keys. Press the Start key.
[Regular] Indicates touch panel keys. Press [Basic].
ItalicIndicates touch panel messages.Ready to copy is displayed.
NOTEIndicates supplemental information or 
operations for reference.
NOTE: -
IMPORTANTIndicates items that are required or 
prohibited so as to avoid problems.
IMPORTANT: -
Downloaded From ManualsPrinter.com Manuals 
						

							xxv
Contents
Take Advantage of Advanced Functions  ...................................................................................... i
Legal and Safety Information ........................................................................................................................ vii
Legal Information  ......................................................................................................................viii
Energy Star Program .................................................................................................................. ix
Safety Conventions in This Guide ...............................................................................................x
Caution Labels  .......................................................................................................................... xii
Installation Precautions  .............................................................................................................xiii
Precautions for Use .................................................................................................................. xiv
Introduction ................................................................................................................................................. xxiii
Guides Included  ......................................................................................................................xxiv
Conventions in This Guide  ......................................................................................................xxiv
1 Part Names ..................................................................................................... 1-1
Copier .......................................................................................................................................1-2
Document Processor ................................................................................................................1-4
Internal Parts  ............................................................................................................................1-5
Operation Panel  .......................................................................................................................1-6
Touch Panel  .............................................................................................................................1-7
2 Preparing to Copy .......................................................................................... 2-1
Loading Paper  ..........................................................................................................................2-2
Specifying Paper Type and Size to the Cassettes and MP Tray  ..............................................2-8
Loading Originals  ...................................................................................................................2-16
Selecting the Language  .........................................................................................................2-20
3 Basic Operation ............................................................................................. 3-1
Basic Copying Procedures  .......................................................................................................3-2
Selecting Image Quality  ...........................................................................................................3-4
Adjusting Exposure  ..................................................................................................................3-5
Reducing/Enlarging ..................................................................................................................3-6
Duplex Mode  .......................................................................................................................... 3-11
Split Mode  ..............................................................................................................................3-14
Sort Mode ...............................................................................................................................3-16
Interrupt Mode  ........................................................................................................................3-17
Job Reservation  .....................................................................................................................3-18
Low-Power Mode  ...................................................................................................................3-19
Sleep Mode  ............................................................................................................................3-20
4 Optional Equipment ....................................................................................... 4-1
Overview of Optional Equipment ..............................................................................................4-2
Side Feeder ..............................................................................................................................4-3
Document Finisher  ...................................................................................................................4-3
Key Counter  .............................................................................................................................4-3
Printer Kit  .................................................................................................................................4-4
Scanner Kit ...............................................................................................................................4-4
Security Kit  ...............................................................................................................................4-4
5 Maintenance ................................................................................................... 5-1
Cleaning the Copier  .................................................................................................................5-2
Replacing Toner Container  .......................................................................................................5-4
6 Troubleshooting ............................................................................................. 6-1
Solving Malfunctions  ................................................................................................................6-2
Responding to Error Messages ................................................................................................6-4
Downloaded From ManualsPrinter.com Manuals 
						

							xxvi
Clearing Paper Jams  ............................................................................................................... 6-9
Appendix ..................................................................................................... Appendix-1
Specifications ............................................................................................................. Appendix-2
Index ................................................................................................................... Index-1
Downloaded From ManualsPrinter.com Manuals 
						

							1-1
1Part Names
This chapter identifies copier parts and operation panel keys.
• Copier...1-2
• Operation Panel...1-6
• Touch Panel...1-7
Downloaded From ManualsPrinter.com Manuals 
						

							Part Names
1-2
Copier
1Operation Panel
2Operation Panel Lock Lever
3Document Processor
4Cassette 1
5Cassette 2
6Cassette 3
7Cassette 4
8MP Tray (multi-purpose tray)
9Paper Width Guides
10MP Tray Extension
11Right Cover
12Handles
3
12
5
4
6
78
9 10
11 12
Downloaded From ManualsPrinter.com Manuals