Kyocera KM C2525E User Manual
Have a look at the manual Kyocera KM C2525E User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 73 Kyocera manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
xix SAFETY OF LASER BEAM (USA) 1. Safety of laser beam This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product is safe to use during normal operation and maintenance. The laser optical system, enclosed in a protective housing and sealed within the external covers, never permits the laser beam to escape. 2. The CDRH Act A laser-product-related act was implemented on Aug. 2, 1976, by the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration (FDA). This act prohibits the sale of laser products in the U.S. without certification, and applies to laser products manufactured after Aug. 1, 1976. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States. On this machine, the label is on the right. 3. Optical unit When checking the optical unit, avoid direct exposure to the laser beam, which is invisible. Shown at below is the label located on the cover of the optical unit. 4. Maintenance For safety of the service personnel, follow the maintenance instructions in the other section of this manual. 5. Safety switch The power to the laser unit is cut off when the front cover is opened. Downloaded From ManualsPrinter.com Manuals
xx Safety Instructions Regarding the Disconnection of Power Caution: The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source. Attention: Le débranchement de la fiche secteur est le seul moyen de mettre l’appareil hors tension. Les interrupteurs sur l’appareil ne sont que des interrupteurs de fonctionnement: ils ne mettent pas l’appareil hors tension. WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • The use of a non-shielded interface cable with the referenced device is prohibited. CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. * The above warning is valid only in the United States of America. Radio Tag Technology In some countries the radio tag technology used in this equipment to identify the toner container may be subject to authorization and the use of this equipment may consequently be restricted. MERCURY WARNING THE LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. Downloaded From ManualsPrinter.com Manuals
xxi Warranty (USA) NEW C2525E/C3225E/C3232E/C4035E MULTIFUNCTIONAL PRODUCT LIMITED WARRANTY 1. Kyocera Mita America, Inc. and Kyocera Mita Canada, Ltd. (both referred to as “Kyocera”) warrant the Customer’s new color Multifunctional Product (referred to as “MFP”) and the new accessories installed with the initial installation of the MFP, against any defects in material and workmanship for a period of one (1) year from date of installation by an Authorized Kyocera Dealer, or 300,000 copies/prints, whichever first occurs. In the event the MFP or an accessory is found to be defective within the warranty period, Kyocera’s only obligation and the Customer’s exclusive remedy shall be replacement of any defective parts. It is understood that Kyocera shall have no obligation to furnish labor. 2. This warranty is valid only as to the original retail purchaser (referred to as the “Customer”) of the MFP in the United States of America or Canada, based upon the country of purchase. 3. In order to obtain performance of this warranty, the Customer must immediately notify the Authorized Kyocera Dealer from whom the MFP was purchased. If the Kyocera Dealer is not able to provide service, write to Kyocera at the address below for the name and address of the Authorized Kyocera Dealer in your area or check Kyocera’s website at www.kyoceramita.com. 4. This warranty does not cover MFPs which: (a) have become damaged due to operator negligence, misuse, accidents, improper storage or unusual physical or electrical stress, (b) have used parts or supplies which are not genuine Kyocera brand, (c) have been serviced by a technician not employed by Kyocera or an Authorized Kyocera Dealer, or (d) have had the serial number modified, altered, or removed. 5. This warranty does not cover Maintenance Kits, the components of Maintenance Kits, or Photoconductor Drums. Kyocera Maintenance Kits and Photoconductor Drums have separate warranties. 6. This warranty gives the Customer specific legal rights. The Customer may also have other rights, which vary from state to state, or province to province. Neither the seller, nor any other person is authorized to extend the time period, or expand this warranty on behalf of Kyocera. 7. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, AND KYOCERA SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SHALL NOT EXTEND TO, AND KYOCERA SHALL NOT BE LIABLE FOR, ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY ARISE OUT OF THE USE, OR INABILITY TO USE, THE MFP. Downloaded From ManualsPrinter.com Manuals
xxiii About this Operation Guide This Operation Guide contains the following chapters: 1Part Names Identifies machine parts and operation panel keys. 2 Preparation for Usage Explains adding paper, placing original, connecting the machine, and necessary configurations before first use. 3 Basic Operation Describes the procedures for basic copying, printing and scanning. 4 Optional Equipment Introduces the convenient optional equipment available for this machine. 5 Maintenance Describes cleaning and toner replacement. 6 Troubleshooting Explains how to handle error messages, paper jams, and other problems. Appendix Lists the machine specifications. Downloaded From ManualsPrinter.com Manuals
xxiv Included Guides The following guides are included with this machine. Refer to the proper guide based on your requirements. Operation Guide (This Guide) Describes how to load paper, basic copy, print and scan operations, and troubleshooting. Advanced Operation Guide Explains copying, printing and scanning features in depth, as well as default settings. This guide is contained on the CD-ROM as a PDF file. Kyocera Extended Driver User Guide Explains how to install and setup the printer driver. This guide is contained on the CD-ROM as a PDF file. PRESCRIBE Commands Command Reference Explains each command for realizing various features and controls through prescribed commands. This guide is contained on the CD-ROM as a PDF file. Downloaded From ManualsPrinter.com Manuals
xxv Conventions in This Guide The following conventions are used depending on the nature of the description. Convention Description Example BoldIndicates a message or button displayed on the operation panel key or a computer screen. Press the Start key. [Regular] Indicates touch panel keys. Press [Basic]. ItalicIndicates touch panel messages.Ready to copy is displayed. NoteIndicates supplemental information or operations for reference. NOTE: - ImportantIndicates items that are required or prohibited so as to avoid problems. IMPORTANT: - Downloaded From ManualsPrinter.com Manuals
xxvi Originals and Paper Sizes This section explains the notation used in this guide when referring to sizes of originals or paper sizes. As in A4 and B5, which may be used either in the horizontal or vertical direction, in order to indicate the orientation of the original/paper, horizontal orientation is indicated by an additional R character. Set direction Indicated size † † The size of original/paper that can be used depends on the function and source tray. For further details, refer to the page detailing that function or source tray. Vertical direction For original/paper, dimension A is longer than B. A4, B5, A5, B6, A6, 16K Horizontal direction For original/paper, dimension A is shorter than B. A4R, B5R, A5R, B6R, A6R, 16KR BB AA Original Size BB AA Original Size Downloaded From ManualsPrinter.com Manuals
xxvii Contents Legal and Safety Information ....................................................................................................................... vii About this Operation Guide ....................................................................................................................... xxiii 1 Part Names .................................................................................................... 1-1 Body ........................................................................................................................................ 1-2 Operation Panel ...................................................................................................................... 1-4 Touch Panel ............................................................................................................................ 1-5 2 Preparation for Usage ................................................................................... 2-1 Loading Paper ......................................................................................................................... 2-2 Setting Paper Type and Size for the Cassettes and MP Tray ................................................. 2-7 Placing Originals ................................................................................................................... 2-16 Language .............................................................................................................................. 2-20 Connecting Cables ................................................................................................................ 2-21 Preparing the Printer ............................................................................................................. 2-22 Preparing the Scanner .......................................................................................................... 2-31 3 Basic Operation ............................................................................................ 3-1 Basic Copying Procedures ...................................................................................................... 3-2 Selecting Image Quality .......................................................................................................... 3-5 Adjusting Exposure ................................................................................................................. 3-6 Reducing/Enlarging ................................................................................................................. 3-7 Duplex Mode ......................................................................................................................... 3-11 Split Mode ............................................................................................................................. 3-14 Sort Mode .............................................................................................................................. 3-16 Interrupt Copy ....................................................................................................................... 3-17 Job Reservation .................................................................................................................... 3-18 Canceling a Print Job ............................................................................................................ 3-19 Scanner Operation ................................................................................................................ 3-20 Low-Power Mode .................................................................................................................. 3-35 Sleep Mode ........................................................................................................................... 3-36 4 Optional Equipment ...................................................................................... 4-1 Overview of Optional Equipment ............................................................................................. 4-2 Document Processor ............................................................................................................... 4-4 Paper Feeder .......................................................................................................................... 4-4 3000 Sheet Paper Feeder ....................................................................................................... 4-4 Document Finisher .................................................................................................................. 4-5 3000 Sheet Document Finisher ............................................................................................... 4-5 Job Separator .......................................................................................................................... 4-5 Key Counter ............................................................................................................................ 4-6 Fax Kit ..................................................................................................................................... 4-6 Memory Card (CompactFlash) ............................................................................................... 4-6 Hard Disk ............................................................................................................................... 4-7 Additional Memory .................................................................................................................. 4-7 Security Kit .............................................................................................................................. 4-7 Network Interface Card ........................................................................................................... 4-8 Serial Interface ........................................................................................................................ 4-8 Document Table ...................................................................................................................... 4-8 5 Maintenance .................................................................................................. 5-1 Cleaning .................................................................................................................................. 5-2 Toner Container and Waste Toner Box Replacement ............................................................. 5-5 Downloaded From ManualsPrinter.com Manuals
xxviii 6 Troubleshooting ............................................................................................ 6-1 Solving Malfunctions ............................................................................................................... 6-2 Responding to Error Messages .............................................................................................. 6-4 Clearing Paper Jams ............................................................................................................ 6-15 Appendix .................................................................................................... Appendix-1 Specifications ............................................................................................................ Appendix-2 Index .................................................................................................................. Index-1 Downloaded From ManualsPrinter.com Manuals