Lawn Mower EMAK El 63 Instructions Manual

INTRODUCTION
Dear Customer,
Thank you for having chosen one of our products. We hope that you will get
complete satisfaction from using your new machine and that it will fully meet all
your expectations.
This manual has been compiled in order that you may get to know your machine
and to be able to use it safely and efficiently. Don’t forget that it forms an integral
part of the machine, so keep it handy so that it can be consulted at any time and
pass it on to the purchaser if you resell the machine....

TABLE OF CONTENTS
1. SAFETY.......................................................................................................... 3
Regulations for using the machine safely
2.  IDENTIFICATION OF THE MACHINE AND COMPONENTS....................... 6
Explanations on how to identify the machine and its main components
3. UNPACKING AND ASSEMBLY...................................................................... 8
Explanations on how to remove the packing and on how to assemble
separated parts
4. CONTROLS...

1. SAFETY
1.1 HOW TO READ THE MANUAL
This manual describes various versions of the machine, which mainly differ in:
– the inclusion of components or accessories which may not be available in
some areas;
– special equipment fitted.
The symbol  highlights all the differences in usage and is followed by the indi-
cation of the version that it refers to.
The symbol “ ☛” makes a reference to another part of the manual where further
information or clarification can be found.
Some paragraphs in the manual...

1.2 SAFETY REGULATIONS
(read carefully before using the machine)
A) TRAINING
1) Read the instructions carefully. Be familiar
with the controls and the proper use of the
equipment.
2) Never allow children or people unfamiliar
with these instructions to use the machine.
Local regulations can restrict the age of the
operator.
3) Never mow while people, especially child-
ren, or pets are nearby.
4) Bear in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or...

1.3 SAFETY LABELS
Your machine must be used with care. Therefore, labels have been placed on the
machine to remind you pictorially of the main precautions to take during use.
These labels are to be considered an integral part of the machine.
If a label should fall off or become illegible, contact your Retailer to replace it.
Their meaning is explained below.
EN 5 SAFETY
before restarting and operating the equip-
ment;
– If the machine starts to vibrate abnormally
(inspect it immediately). 
11) Disengage...

2. IDENTIFICATION OF THE MACHINE AND COMPONENTS
2.1 IDENTIFICATION OF THE MACHINE
The identification label located under
the seat has the essential data of each
machine.
The serial number (6) must be quoted
when you require technical assistance
or spare parts.
1.Acoustic power level according to directive 2000/14/CE
2.Conformity mark according to directive 98/37/EEC 
3.Year of manufacture
4.Operating engine speed in r.p.m (if indicated)
5.Type of machine
6.Serial number
7.Weight in kg
8.Name and address...

13. Collector channel:this is the part connecting the cutting deck to the grass-
catcher. 
14. Grass-catcher:as well as collecting the grass cuttings, this is also a safety
element in that it stops any objects drawn up by the blade from being
thrown outside of the machine.
15. Engine:this moves the blade and drives the wheels. Its specifications and
regulations for use are described in a specific manual.
16. Batteria (  only in the electric start models): provides the energy for
starting the engine. Its...

3. UNPACKING AND ASSEMBLY
The machine is supplied without engine oil or fuel. Before
starting up the engine, fill with oil and fuel following the instructions given in
paragraph 5.3.3. and in the engine manual.
For storage and transport reasons, some components of the machine have to be
assembled after their removal from the packing. Final assembly is carried out by
following these simple instructions.
3.1 UNPACKING
When unpacking the machine, take care to gather all the individual parts, fittings
and...

3.3 FITTING THE SEAT
1. Fit the seat (1) onto the plate (2) using the
screws (3).
3.4 FITTING THE BLADE ENGAGEMENT
LEVER
1. Fit the end of the lever (1) on the projecting
part of the pin (2) and fix it all by tightening
the screw (3) and nut (4). 
3.5 CONNECTING THE BATTERY(  sonly in the electric start models):
1. Position the battery (1) in its compart-
ment under the seat;
2. connect the battery connector (2) to the
machine connector (3);
3. fit the spring (4) to hold the battery in
place;
4. recharge...

3.6 FITTING THE GRASS-CATCHER
Identify the screws to be used by following the drawing that shows them in their
actual size.
1. Fit the upper frame (1) in the upper slots (2) of the canvas cover (3);
2. join the two pieces of the frame (1) and (4) using the screws (5). Fit the two tie
rods (6) and fasten them by using the screws (7);
3. hook the plastic profiles (8) onto the front frame tubes (4) with the aid of a
screwdriver (9).
4. insert the handle (10) into the holes of the cover (11) and attach this...