LG Ld 9241wh Owners Manual

							 
DISHWASHER
Please read this manual carefully before operating your 
dishwasher. Retain it for future reference.
OWNERS MANUAL
MODEL : LD - 9230(1)W(S,M)H
LD - 9230(1)W(S,M)HB
LD - 9240(1)W(S,M)H
LD - 9240(1)W(S,M)HB
LD - 9250(1)W(M)HB
 
						

							CONTENTS
SAFETY AND CAUTION 3
INSTALLATION INSTRUCTIONS 5
PARTS NAME 9
FUNCTION OF CONTROL BUTTON 10
HOW TO USE AND OPERATE 14
OPERATING SEQUENCE 20
PROGRAM 21
USER MAINTENANCE INSTRUCTIONS 22
TROUBLE SHOOTING GUIDE 23
SPECIFICATION 
 
						

							3
SAFETY AND CAUTION
• Please read this manual carefully before using the
dishwasher for the first time.
• This manual contains very important notes
regarding the installation, use and maintenance of
your dishwasher.
• The manufacturer can not be responsible for
problems caused by ignoring these safety and
caution instructions.
• This dishwasher is designed for normal household
use.
• Do not use the dishwasher for industrial and
commercial use, or other purpose.
• The appliance is not intended for use by young
children or infirm persons without supervision.
During installation
• Electrical connection must be in accordance with
the rating label.
• Electrical safety is only guaranteed when the earth
system of your house is in accordance with the
related local regulations.(Do not use an extension
cable or cord.)
• If the hot water exceeds 65ºC, adjust the water
heater setting. If the hot water temperature can not
be maintained below 65ºC, the dishwasher must be
connected to cold water.
• If power supply cord is damaged, it must only be
replaced by the manufacturer or its service agent or
a similar qualified person in order to avoid a
hazard.
• This appliance must be positioned so that the plug
is accessible.
• The appliance is to be connected to the water mains
using new hose-sets and that old hose-sets should
not be reused.
• Important : when the appliance location is on carpet
floors, attention must be paid so as to ensure that
there is no obstruction to the bottom vents.
During use
• Only suitable household utensils should be placed
in the dishwasher.
(Please avoid utensils; that are non-heatresistant,
metal decorated, etc.)
• Do not abuse, sit on,or stand on the door or dish
Rack of the dishwasher.
•  Do not touch the heating element during or
immediately after use.
•  Do not tamper with controls.
•  Do not operate your dishwasher unless allenclosure panels are properly in place. open the
door very carefully if the dishwasher is operating,
there is a risk of water squirting out.
•  Do not place any heavy objects of stand on the
door when it is open.The appliance could tip
forward. when loading items to be washed:
1) Locate sharp items so that they are not likely to
damage the door seal;
2) Load sharp knives with the handles up to reduce
the risk of cut-type in juries.
• Please dispose of packing materials properly.
• Do not use any kinds of solvent in your dishwasher.
They may cause an explosion or fire.
• Do not spray water on the appliance. 
It may cause the failure of electric parts or electric
shock.
• Do not push down or sit on the inner door when the
door opened. It may cause the deformation or
failure of your dishwasher.
• Do not use the detergent for hand washing. 
The detergent for dishwasher should be used for
normal operation.
• This appliance is fitted with a safety function that
automatically stops the operation of the dishwasher
when it is exposed to heavy disturbance on its
mains.
• Dishwasher detergents are strongly alkaline. They
can be extremely dangerous if swallowed. Avoid
contact with skin and eyes and keep children away
from the dishwasher when the door is open. 
Check that the detergent receptacle is empty after
completion of the wash cycle.
• Do not wash plastic items unless they are marked
“dishwasher safe” or the equivalent. For Plastic
items not so marked, check the manufacturers
recommendations.
• If dishwasher is kept below 0ºC for a long time, the
remained water in dishwasher can be
frozen.Please,leave it more than 3 hours at room
temperature before you run it.Child Safety
• Controls may be locked using “Child Lock” mode
to prevent from all the setting from being changed
by a child.
• Keep children away from detergents and rinse-aids.
• Do not allow children to operate the dishwasher.
• Young children should be supervised to ensure that
they do not play with the appliance.
IMPORTANT SAFETY INSTRUCTIONS
WARNING- When using your dishwasher, follow basic precautions,
including the following:
 
						

							4
SAFETY AND CAUTION
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least resistance
for electric current. This appliance is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is installed and grounded in accordance with all local codes and
ordinances.
WARNING - Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or service
representative if you are in doubt whether the appliance is properly
grounded. Do not modify the plug provided with the appliance; if it will not
fit the outlet have a proper outlet installed by a qualified electrician.
SAVE THESE INSTRUCTIONS
CAUTION concerning the Power Cord
•Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional outlets or branch circuits. Check the specification page of
this owners manual to be certain.
•Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in
electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
•Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the
appliance.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product
it means the product is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
 
						

							Unit:mm
Step 1 : 
PREPARE CUPBOARD OPENINGStep 2 : 
PREPARATION FOR ELECTICAL WIRING
1
2
3This appliance must be supplied with
correct rating voltage and hertz as shown
on instruction manual, and connected to
an individual, properly earthed branch
circuit, protected by a minimum 15 amp
circuit breaker or time delay fuse.
Wiring must be 2 wire with Earth.
The power plug must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher side.(See page 7 Fig.A)
The power plug must be correctly
earthed, if in doubt, have it checked by a
qualified Electrician. No other appliance
should be connected to the same plug
outlet by a double adapter or similar
plug.
CAUTION
For personal safety, remove house fuse
or open circuit breaker before installation.
Do not use an extension cord or adapter
plug with this appliance. Electrical and
earthing connections must comply with
the national electrical code/provincial and
municipal code and/or other local codes.
Any bare wood surrounding the dishwasher
should be sealed with a waterproof paint or
sealant to prevent swelling.
INSTALLING INSTRUCTIONS
WARNING
A qualified electrician/plumber or
competent person should carry out any
electrical/plumbing work required to
install this appliance.
1
2
3
4This dishwasher is designed to fit the size
shown as below.
Select a location as close to sink as
possible for ease of connection to the
water and drain pipes.
To ensure good drainage, the dishwasher
should not be installed more than 3 meters
away from the sink.
If dishwasher is installed in a corner, a
minimum of 5cm of space is required
between the washer and an adjacent
cabinet or wall.
5
 
						

							INSTALLATION INSTRUCTIONS
6
Step 3 : 
PREPARING THE DISHWASHER
FOR INSTALLATION
1
2Lay the dishwasher on its back.
Adjust the legs to the required height
as shown in below figure.
Step 4 : 
INSTALLING THE DISHWASHER
IN CUPBOARD
1
2
Before sliding the dishwasher into the
cupboard opening, all necessary height and
balancing adjustments should be made
using a spanner.
Slide the dishwasher into the cabinet
opening carefully. Make sure that the
drain hose inside the cabinet is not
kinked or stretched.
CAUTION
If the height of the cupboard is below 850mm,
you should remove the top table by
unscrewing the 2 screws. (Two of rear)
 
						

							Step 5 : 
DRAIN LINE CONNECTION
1
2If the end of drain hose does not fit to
the drain line, use a rubber
connector(not supplied) that is
resistant to heat and detergent.
This should be available from a
plumbing shop or DIY merchants.
There are two typical connections as
shown in Figure A, B.
The “S” trap spigot must be drilled out
cleanly and free of obstruction to its
maximum internal diameter, if used for
drainage.
To prevent siphoning, one of the following
methods must be used:
■When the drain hose is connected to a
sink “s” trap or waste disposal unit, the
hose must be looped up to the underside
of the bench top and secured.■When the drain hose is connected to a
separate standpipe, it is essential that an
airtight connection be made.
Refer to Fig.B
Drain hose Extension
Extend drain hose as shown below.
Fig. A
Fig. B : Drainage connection - stand pipe.
INSTALLATION INSTRUCTIONS
CAUTION
When you connect or extend drain hose,
make sure that drain hose is not kinked.
(Bends should have a 40 mm radius.) 
7
 
						

							INSTALLATION INSTRUCTIONS
8
Step 6 : 
WATER SUPPLY CONNECTION
1
2
Connect the water supply hose to the
water tap as shown.(Some models consist
of an inlet valve and hose.)
This dishwasher may be fed with either
hot or cold water. If the water can not be
maintained below 65ºC, the dishwasher
must be connected to cold water.
When connecting, the sealant tape or
sealing compound to avoid water leaks.
Make sure that the line is not kinked or
sharply bent.
Step 7 : 
FINAL CHECK AND ASSEMBLING
1
2Securely hand tighten supply hose to the
water supply.
Plug the power supply cord into an
earthed electrical point and switch on.
After installing and prior to using the
dishwasher with crockery, we
recommend that you use the dishwasher
on ‘Quick’ mode to rinse through. At this
stage it is useful to ensure that there are
no operating problems or water leaks.
When the dishwasher is used for the first,
there may be a loud noise, if this
happens, turn off the power and restart
the dishwasher.
Step 8 : 
HOW TO LEVEL THE DISHWASHER
After installing the dishwasher, you may notice
a slight sticking of the door to the dishwasher,
when you open or close the door. If this does
happen you need to adjust the level of the
dishwasher.
• If the door slants to the right, see fig, C and
follow these instructions:
1) Unscrew(counter-clockwise) the left leg of
the back side and correct the level.
2) Check the opening of door and repeat if
necessary until the door opens and closes
properly.
• When the product is correctly leveled, There
should be no slant , stickiness or friction sound.
• If the door slants to the left, see fig. D and
follow these instructions:
1) Check the opening of door if there still
remains sticky or friction sound.
2) 
Check the opening of door and repeat if
necessary until the door opens and closes
properly.
• When the product is correctly leveled, There
should be no slant , stickiness or friction
sound.
Fig. C
Fig. D
Case 1. In case the door is slanted to the right
Case 2. In case the door is slanted to the left
Water tap
Water supply
hose
Valve
 
						

							1. Control Panel
2. Front Cover
3. Process Monitor
4. Power Switch
5. Drain Hose
6. Inlet Hose
7. Power Cord
8. Adjust Leg
9. Door Handle
10. Lower Cover11. Upper Rack
12. Cutlery Basket
13. Detergent And Rinse
Aid Dispenser
14. Upper Spray Arm
15. Lower Spray Arm
16. Filter ASM
17. Lower Rack
18. Salt Container Cap
※The appearance and specifications may vary without notice.
PARTS NAME
9
Funnel(1EA) Inlet hose(1EA)
1 34
5
6
7
8 2
 
						

							LD-923~ / 924~ Series
FUNCTION OF CONTROL BUTTON
10
LD-923~ SeriesLD-924~ Series