LG Ld 9241wh Owners Manual
Have a look at the manual LG Ld 9241wh Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 ▶Running time may vary according to the water temperature, water pressure and voltage. Intensive Wash This program is ideal for very dirty crockery, in particular pots, pans and casserole dishes. Quick Wash Can use for lightly soiled recently used dishes and cutlery. Eco Wash This program offers the most efficient energy and water consumption for a good washing performance. It is recommended that it will be used every time. Pre-wash Can use this program for only removing soil before washing dishes by hand. Normal Wash This Program is for normally soiled everyday loads. Program Normal Intensive Eco Quick Pre-wash 45℃ ℃ 40℃ ℃65℃ ℃ 65℃ ℃ 45℃ ℃ 70℃ ℃ 70℃ ℃ 50℃ ℃ 70℃ ℃ 65℃ ℃ WASH Pre Wash Rinse 1 Rinse 2Heating Rinse Main Wash RINSE DRY PROGRAM
22 USER MAINTENANCE INSTRUCTIONS To prevent trouble and poor operating, it is important to check filters and spray arms at regular intervals. Filters • Remove the lower rack first. • Remove the filter by pulling up. • Take out the mesh filter, upper STS filter and outer filter. • Clean them if necessary. • Replace them in the reverse order. ATTENTION:Do not put the fine filter up side down. Protect against Freezing If your dishwasher is left in non heated place during the winter, ask a service technician to: 1. Cut off electrical power to the dishwasher. 2. Turn off the water supply and disconnect the water inlet pipe from the water valve. 3. Drain water from the inlet pipe and water valve. (Use a pan to catch the water.) 4. Reconnect the water inlet Water valve. 5. Remove the filter in the and use a sponge to soak up water In sump. Upper Spray Arm • Pull the upper rack forwards. • Check that the water jet holes are not blocked. • If cleaning is required, remove the arm by unscrewing the nut. • Clean the spray arm and replace it in the reverse order. Lower Spray Arm • Check that the water jet holes are not blocked. • If cleaning is required, remove the arm by pulling up. • Clean the spray arm and replace it pulling down. ■After each cycle, clean the filter for the better washing result. ■Before starting, check that the filter is assembled well. If the filter is not assembled correctly, you might have a poor cleaning result.
23 If a problem occurs check below to see whether this can be solved. In the unlikely event that the problem cannot be rectified, please contact a service engineer. Possible Causes • Plug is not properly inserted into the socket. • Fuse blown or circuit breaker tripped. • The electricity of the house was cut off. • Door is not fully closed. • The start button is not pressed. • The drain hose is kinked. • The filter is clogged. (Clean the filter.) • Water is not supplied. (Water tap is not opened.) • Water is leaking from the Hose connections. • Damage to the unit has been caused by a water leak. • The water heater circuit is damaged. • The mounting of the spray arms is blocked by food particles. (Clean the holes of the spray arm.) • The amount of detergent or rinse-aid set incorrectly. • The salt container is empty. • The salt container cap is not securely screwed on. • Too little Rinse-Aid dispensed. • Too little Rinse-Aid dispensed. • Incorrect amount of detergent. • Utensils incorrectly arranged or overloaded. • Filters are clogged. • Water jet holes of spray arms blocked. • Spray arms’ rotation obstructed by utensils. • Unsuitable program selected. Problem No lights come on when the power is turned on. The machine does not start. Water is not pumped away. (The display show “ ” code.) The display shows “ ” code. The display shows “ ” code. The display shows “ ” code. The spray arms do not rotate smoothly. White deposits are left on the dish washer after washing. Streaks are left on glassware. Dry results are not satisfactory. Washing results are not satisfactory. TROUBLE SHOOTING GUIDE
P/No.: 672060102002 450mm 580mm 850mm 450mm 550mm 817mm450mm 530mm 817mm Capacity Weight Power Supply Power Consumption Water Feed Pressure9 Place settings See rating label See rating label See rating label 50 ~ 800 kPa LD-9230(1)W(S,M)H LD-9240(1)W(S,M)H LD-9230(1)W(S,M)HB LD-9240(1)W(S,M)HBLD-9250(1)W(M)HB