Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Octel 100 Implementation And Service Manual
Lucent Technologies Octel 100 Implementation And Service Manual
Here you can view all the pages of manual Lucent Technologies Octel 100 Implementation And Service Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 651
SITE INFORMATION WORKSHEETSSI-5 Feature Value Set Default Value Extension Connec ted to Fax Channel 6 Extension Connec ted to Fax Channel 7 Extension Connec ted to Fax Channel 8 Extension Connec ted to Fax Channel 9 Extension Connec ted to Fax Channel 10 Extension Connec ted to Fax Channel 11 Call Queuing Parameters (Call Queuing tab) Maximum Number of Callers Allowed in Queue 5 Voic e “Extension is (still) bus y while in Q ueue Yes Voic e Callers Pos ition in QueueYes Voic e Pleas e Hold while Call is...
Page 652
SITE INFORMATION WORKSHEETSSI-6 Feature Value Set Default Value Use DialPlan databas eNo Time to wait for possible incoming call (SCHDW AIT) 500 M essage Delivery Parameters (M sg Delivery tab) Custom Mess age Delivery Code Number of Seconds to W ait before Message Delivery 1 Dial T one Timeout During Mess age Delivery (DTONW AIT) 200 M essage Indicator Parameters (M I tab) Permit Message IndicatorsNo Mess age Indic ator Prefix ON Code Mess age Indic ator Prefix OFF Code Message Indicator Suffix ON Code...
Page 653
SITE INFORMATION WORKSHEETSSI-7 Feature Value Set Default Value Common Setup Parameters – Protoc ol – Us e Shared Files Yes Common Setup Parameters – Protoc ol – Us e SPX No Common Setup Parameters – File Server – Netware Yes Common Setup Parameters – File Server – Loc al No Common Setup Parameters – File Server – Peer OS/2 No Common Setup Parameters – Server Path Novell Netware Server Setup – Server Name Novell Netware Server Setup – Login Acct Name VFS_ACCT Novell Netware Server Setup – Login Acct...
Page 655
Implementation and Service Manual Visual Mailbox Configuration W orksheets1 WORKSHEETS VM Visual Mailbox Configuration Worksheets Use these worksheets to collect and record the information necessary to successfully implement Visual Mailbox for use with the messaging system. You should work with the network administrator at the customer site to complete the appropriate worksheets.
Page 656
Vis ual Mailbox Conf iguration W orks heets Implementation and Service Manual Visual Mailbox Configuration W orksheets2 Notes:
Page 657
VISUAL MAILBOX CONFIGURATION WORKSHEETSVM-1 Visual Mailbox Implementation Considerations Worksheet The following list of considerations are designed to ensure a smooth Visual Mailbox installation. Make sure you and the site’s LAN Administrator complete this worksheet before you attempt Visual Mailbox installation. Setting Up the LAN ____ Does the LAN meet the necessary requirements: ____ Novell NetW are 3.x, 4.x, or NT Server ____ Shared file configuration ____ Does the LAN server have enough hard...
Page 658
VISUAL MAILBOX CONFIGURATION WORKSHEETSVM-2 ____ Is the switch configured as described in the Configuration Note? ____ If required, is the messaging system integrated with the switch? Client PC Requirements ____ Are all client PCs ready for installing the interface: ____ Does each client PC meet the minimum requirements for CPU and memory? ____ Is a network card installed in each client PC? ____ Record the interrupts and addresses of each client PC network card. ____ Does each client PC have a...
Page 659
VISUAL MAILBOX CONFIGURATION WORKSHEETSVM-3 Novell NetWare Configuration Worksheet If the Visual Mailbox Voice Fax Server is being connected to a Novell network, use this worksheet to properly configure the Novell network for Visual Mailbox installation and to provide to the authorized representative the information required for a successful Visual Mailbox implemention. Perform the Following Tasks Before Visual Mailbox Installation: Place a check to each task as you complete it: ____ Create the...
Page 660
VISUAL MAILBOX CONFIGURATION WORKSHEETSVM-4 Record the Following Required Information: 1. Record the Novell server that stores the \VMBOX directory: 2. Record the volume under the specified server and the directory structure that contains the \VMBOX directory:...