Metz Milos 37s Operating Instructions

61
23. Station Logo
With the aid of the VPS signal, a station logo with
a maximum length of 15 characters is automati-
cally assigned to each station.
If this automatic assignment does not work, or if
you want to use a different logo, you can change
the setting manually.
Setting the station logo
• Press the MENU key.
• Press the white key  to open the “station
table”.
• Press the F2key to enable editing of the station
table.
• Select the programme position whose logo you
wish to change.
• Press the...

62
24. Sorting Stations
You can move, copy and delete individual stations
or groups of stations within the station table.
Moving, copying and deleting stations
• Press the MENU key to open the TV menu.
• Press the white key  to open the station table.
• Use the cursor control keyto select the pro-
gramme position which is to be moved, copied
or deleted. You can also mark a contiguous
block of positions by moving the cursor to the
programme position at the end of the block.
• Briefly press the OKkey to...

63
25. Registering AV DevicesOpening the menu
MENUAV(audio/video) devicesare external devices
which deliver video and/or audio signals (such
as video recorders, DVD players, DVD recorders,
etc.) and which can be connected to TV sets.
All commonly available AV devices are listed in
the menu AV devices.
Note that you must always connect AV
devices exactly as shown in the connection
diagram in the TV menu of your TV set !
SVHS/Hi8 and Data Logic video recorders must
always be connected to the EURO1 socket...

64
Data Logic video recorder
Data Logic is a system which provides a dialo-
gue between a TV set and a video recorder. This
intelligent system offers the features such as:
- Automatic transfer of the settings for terrestrial or
cable TV stations (not DVB) to the video recorder.
- Immediate recording - the video recorder
records the programme currently displayed on
the TV screen.
- Automatic switching to the AV programme posi-
tion.
- Direct control of the video recorder from the
timer menu of the TV...

65
25. Registering AV Devices
Data Logic
Opening the menu
• Press numeric key !, use the - +key to select
the correct signal types (OUT/IN) and press the
OK key.
(See also the operating instructions of the 
AV device.)
• If desired, press numeric key 
, enter a new
name for the AV device and press the OK key.
• Use the cursor control key to select  Data
Logic and press the OK key.
• Use the cursor control key to select Connect
and press the OK key. Then connect the AV
device to the corresponding EURO...

66
The signal type always refers to the input
and output of the AV device.
Some AV devices may use a composite video sig-
nal (FBAS) for recording and playback operations
and an RGB signal for displaying their menus.
It is not possible to make a general statement in
this respect. The operating instructions of the AV
device concerned may provide some indication.
If you connect such an AV device with the signal
type composite video (FBAS) and recordings are
played back correctly, but you cannot see the...

67
25. Registering AV Devices
Setting signal types DVI/HDMI
The signal type always refers to the input
and output of the AV device.
AV devices equipped with a DVI or HDMI socket
can be connected to the LCD TV with the aid of a
DVI or HDMI cable, respectively.
The connected device must be registered in the
menu AV devices with Signal OUT set to
DVI or HDMI, as applicable. Connection via a
DVI or HDMI interface permits digital transfer of
the picture signal from the device to the TV set.
The sound signal...

68
25.1 Removing AV DevicesOpening the menu
MENU
OK
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
OK
This menu item is not available in a 2 **
menu.
If desired, you can change the factory settings for
AV devices (a video recorder on the EURO1
socket and a DVD player on the EURO2 socket).
Removing an AV device from the TV set
• Press...

69
You can define an initial programme position in
this TV set. This initial programme position is used
primarily to select the AV programme position if
you use an external receiver.
Setting the initial programme position
This menu item is not available in a 2 **
menu.
Select a receiver (satellite or set-top box) in the
menu AV devices and connect the receiver to the
TV set (see also Section 25, Registering AV Devi-
ces).
• Press the AV key.
• Use the numeric keys to select the
position Sat/Set-top in...

70
MENU
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
27. Sound via HiFi Amplifier
HiFi output
On the rear of the TV set, you will find audio
sockets and a digital audio-out socket (see page
79) which can be used to connect the TV set to a
HiFi system (HiFi amplifier).
Settings need to be made in the menu items HiFi
output and Sound...