Metz Milos 37s Operating Instructions

81
• Use the cursor control key to select the line
Recording device.
If only one such device exists, it is then display-
ed. If further recording devices exist, you can
select the desired device with the aid of 
the 
-+
key.
• Press the OK key to save the settings.
• On the playback device (in this example, the
DVD player) start the film which is to be copied.
• On the recording device (in this example, the
video recorder), select the AV programme posi-
tion (in most cases AV1).
• On the recording...

82
Opening the menu
MENU
37. Setting the Picture Format
Some of the following menu items are not
available on a 2 ** menu.
Setting the picture format:
• Select the AV programme position which deli-
vers the picture by pressing the AV key and
then pressing the numeric key corresponding to
the device you want to use.
• Press the MENU key. The TV menu appears on
the screen.
• Press the blue key  to open the menu Picture
and sound. The menu item General
picture settings is preselected.
• Press numeric key...

83
38. Glossar y
Automatic zoom
When the automatic zoom function is active, pro-
grammes broadcast in widescreen format (such
as those in the 16:9 format) are expanded to fill
as much of the screen as possible.
If this function is inactive, the format of such pro-
grammes is not adjusted automatically.
AV programme position
AV devices have one or more connection sockets,
depending on the model. The designations of the-
se sockets are marked on the device (e.g. AV1).
On the AV device, you can select which...

84
Panorama
The panorama function can be used to expand
normal TV programmes broadcast in the 4:3
format to fill the full width of a 16:9 screen. This is
done by expanding the picture width accordingly.
Picture position, vertical
With widescreen films, subtitles are sometimes
transmitted in the black area at the bottom of the
screen. You can move the picture upwards on the
screen to ensure that these subtitles remain visible.
Standard values
The standard values are the settings (such as
brightness, sound...

85
38. Glossar y
The SRS WOW technology is used by Metz under
a licence from SRS Labs, Inc.
Tone settings
The tone can be set to either Normal or
Speech. In the setting Speech, the bass and
treble components of the sound signal are set to
make speech as easy to understand as possible.
The setting Normal is recommended for music
programmes.
VCR
The VCR function provides an optimal picture qua-
lity when playing back recordings from tape devi-
ces such as camcorders or video recorders.
Volume correction...

86
Mains voltage:
230-240 VAC, 50Hz
Antenna input:
75 Ohms, unbalanced DIN 45325
Channel coverage:
Standard channels 2 - 12, 21 - 69
Special channels S1 - S20, S21 - S41,
S42 ... S46 (Belgium channels OIR)
Power
consumption
Energy consumption per hour (Wh):
Multiply the power consumption in W by 1 hour 
Stand-by: 1.8 W
Power consumption
(to CENELEC /
TC 59 X)Music output power
to DIN 45324
into 4Ω(at 1 kHz)
(sinusoidal power)
*) into 8Ω
39. Technical Data
If a DVB-S module is instal-
led, the power...

87
Supported Signal Standards
Video HDMI
a) 720x480i/p 60Hz RGB                                     
b) 720x480i/p 60Hz YCbCr 4:4:4 / 4:2:2
c) 720x576i/p 50Hz RGB
d) 720x576i/p 50Hz YCbCr 4:4:4 / 4:2:2
e) 1280x720p 50/60Hz RGB
f) 1280x720p 50/60Hz  YCbCr 4:4:4 / 4:2:2
g) 1920x1080i 50/60Hz RGB 
h)1920x1080i 50/60Hz YCbCr 4:4:4 / 4:2:2
i) 640x480p 60Hz RGB
Video DVI-D
a) ... h) from Video HDMI, and
640x480p 60Hz RGB (DVI-D, analog)
800x600p 60Hz RGB (DVI-D, analog)
1024x768p 60Hz RGB (DVI-D, analog)...

88
40. Upgrade Kits
• DVB-S digital upgrade kit 029 NM 1119
For the reception of digital TV and radio sta-
tions broadcast via satellites. The DVB upgrade
kit is installed in the TV set, which means that no
external remote control is needed.
• MD module 060 NM 1043 MPEG-Decoder
Ask your local dealer about any further upgrade
kits.
You can also find further information on our
homepage: www.metz.de.
39. Technical Data
Audio Scart / Front AV, Comp Audio, DVI Audio:
Analog Stereo
Audio Center IN:
Analog mono
 

89
41. Basic differences between analog terrestrial
reception and DVB-T
Information for our dealers and interested
customers.
In order to understand how the behaviour
of DVB-T receivers differs from that of the
analog terrestrial receivers used until
now, two things are important: digital
transmission and the simultaneous broad-
casting network.
Digital transmission
A DVB transmitter does not transmit only
a single programme, but a set of pro-
grammes – normally six to eight. The
information for each...

90
41. Basic differences between analog terrestrial
reception and DVB-T
Addition
Cancellation
In most cases, only a few of the 8,192
carrier frequencies will be fully cancelled
out and the information which is lost can
be reconstructed by the error-correction
function of the receiver. Reception beco-
mes impossible only if very strong reflec-
tions cause the loss of too many carrier
frequencies. 
The phase relationship between two sig-
nals depends on the path taken by these
signals on their way to the...